Glarks 1940Pcs 2.5mm Pitch 2/3/4/5/6/7/8/9 Pin Male and Female Plug Housing and Male/Female Pin Header Perfectly Compatible with JST-SM Connector Assortment Kit

Since receiving this I've crimped at least 16 different connectors, all fully working at first attempt!If you have a proper crimping tool (I'm using one from Iwiss), you can't go wrong with this one!Very please and will definitely be buying more when these finish.

Really happy. Did the job nicely. I used these ends to replace the single ends that are on the cheap Arduino jumper ribbons to quickly make an extension lead.

Perfect

The terminals are ok but the wire is a waste of time it just doesn't separate apart very well had to buy more wire

All was fine - as it should be !

Great!

bon produit

Ware Top,schneller Versand

ATTENZIONE il passo dei connettori e' solo ed esclusivamente 2,54mm il tipo di connettore e' denominato come modello JS da non confondere con il modello JST , il materiale invece e' di buona fattura sempre che si cerchi questo tipo di connettori

I’m experimenting with Arduino IoT implementations and needed a way to interface external devices to circuit boards. This kit is perfect for that purpose. I have done a rough inventory and there are an equal number of plugs to sockets and an ample quantity of each. The quality is good. NOTE: Do not buy the crimping tool recommended for these connectors (Iwiss SN-28B). The dies are much too wide. Instead buy an Iwiss SN-01BM crimper which has the narrow jaws required by these crimp connectors. Using the right tool, the wire and insulation are tight. The SN-01BM will handle wire gages 28 up to 20.