241 LEDs 9 Rings WS2812B 5050 RGB LED Ring Lamp Light Individually Addressable Full Dream Color DC5V with Mini Controller

I bought this product slightly over a year ago and made a kaleidoscope just for my entertainment. It has been running continuously (24/7) for the entire year and it is still bright; vivid colors and no missing pixels and just keeps on working. The soft focus on the video is due to a white plastic sheet in front of the LEDs.

Great circular light but I need it to be 12" so I can light up my colored vinyl for photos. I popped out the center hole and placed it on my turntable so that was cool but the lighting is uneven since it's smaller than 12".. that's a me issue, not a product issue so I'm keeping 5 stars.

The 60 LED large ring is a nice neopixel/WS2812b option for adding to your projects. The JST 3-pin SM plugs are flat soldered to contacts on the back of the ring PCB. There is nothing to tie it off or prevent tension on those solder joints and they break very easily. It isn't hard to solder them back but be careful while handling it until those cables are securely fastened into whatever fixture you are putting this in. The same comment applies to all WS2812b products with similar JST 3-pin SM pins. I wish someone sold a basic plastic mounting kit to hold the ring and secure the wiring. I guess I need to get a 3D printer to do that myself! Oh goodie, more toys.I have bought about a dozen different WS2812b configurations from Wesiri. Every one worked with no problems other than the aforementioned connection problems. They are typically comparable to BTF Lighting but sometimes less expensive. That said, I don't tend to have the connectors break on BTF Lighting products.I use the 60 LED ring in some artsy MCU-powered crafts including using the ring to simulate a colorful analog clock, or providing lighting to a scene in a shadow box or terrarium-like enclosure. Also use for VU meters, waterfall simulations, and audio spectrum analysis making good use of the 16 million color possibilities.

Needed LED that were on actual printed circuit board so they can better handle the heat so I'm using the outer 2 rings in this mod. The rings are easy to separate along the perforation holes that are provided between the rings. Just a took literally a couple of seconds with a Dremel's cutting disk. These worked out perfect with the help of some aluminized heat shield designed for electrical wires in engines and a bit of tin foil in the middle part at least. Also wrapped the wires in that stuff. I don't know how hot that 150W ceramic heating bulb can get. I melted my desktop thermometer testing it SMH..... lol Whoops. But suffice to say it's really hot, and would probably give an instablister if I directly touched it. Yet these LED have lasted for 2 years now without a single one burning out even in all that heat. That being said though they have started to degrade and don't show colors as accurately as they first did, but that's to be expected. LED and heat don't really go together well. But with how inexpensive these rings are it's no biggie to just replace them after a few years. Was hoping to be able to sync it up with the lighting modes my PC is running but with the lights so close together and the wax not being a very good medium, small changes in color just doesn't show up well on the wax. So instead of running them like most ARGB products are I'm just running them like RGB with all LED changing color at the same time. But oh well you can't have everything in life. I'm still really happy with how the mod came out and being normal 5v ARGB it let me run it off the same controller and software the rest of my lighting is run off of.

I was very excited about finally working with the WS2812B rings. I had hoped to put this into a computer case project I'm commissioned to build. However, after the first set I received my hopes dwindled.The first ring set was only partially bad. 99.59% bad. Nothing lit up at first. I suspected the controller so I tested that on two other RGBLED strips and it worked fine. I started to connect the controller to each ring individually and only got the center LED to work. Another ring partially lit wrong and then sparked. That set went back.The second ring set was just DOA. Now, this set is going back.This would have been a perfect 5 stars if it worked. It would have been an excellent value and I would have recommended this to anyone wanting to play with RGBLEDs like Neopixels. With this failure rate, make sure you can return it if you decide to try it.

This light is totally defective. Only 3 led lights are working and the control switches are not functioning correctly!Returning todayUpdate, second one after the exchange is working perfectly fine! They need to test the items before sending it.

Very happy with this purchase. Needed 60 addressable RGB LEDs in a ring configuration to make a hybrid clock with hour, minute and second hands represented by single LEDs of different colors moving on a single "track". Using an ESP32S3 clone to control the LEDs. Bonus for the clockwise layout as the LEDs are addressed left to right, or clockwise in it's ring form factor. This makes controlling in a clockwise LED motion easy to program as indexing the LEDs goes from 0 to 59. Comes with a small controller which I have not used but is nice to have. The product was well packaged to protect it during shipping and handling. Wished I had a CAD file that show the exact position of the LEDs window so I could make a decorative cover for it and expose only the LED lights. Would buy it again if needed.

I received my first set of led's, and they were DOA...I believe the packaging was the reason, no packing. Amazon quickly replaced and shipped in a box with packing. They worked beautifully, but then the 8 led ring was flickering...it seemed it was at the weld of the control wire. I reached out to Wesiri, and they responded quickly and offered to ship me a new replacement. I can't say enough, about exceptional customer service...it's very rare anymore, but not with Wesiri. Kudos, keep up the great work!