Spigen Full Cover Glass iPhone 6s Plus Screen Protector with Tempered Glass for iPhone 6s Plus/ 6 Plus – Black

I call this the "Secret Service" of screen protectors, because it nearly literally took a bullet for my iPhone 6S Plus. I ordered this and it arrived the same day the iPhone was released. It provides a wet wipe, a dry lint-free wipe, a standard cleaning cloth, and a dust-removing sticker. The instructions provided are pretty simple to follow. There wasn't a squeegee provided, so I used one that came with the screen protector for my iPad. Truth be told, it wasn't really necessary. The actual screen protector has stickers on both sides to keep it dust/scratch free, and another sticker with tabs to place it without touching the phone's screen.When you place it, you simply touch center-mass of the screen protector, and it adheres itself to the screen. This has been the easiest, most bubble-free installation of a screen protector that I've dealt with since I first got a smart phone. No major, or really even minor bubbles to talk of. It adhered itself, and with a simple touch I was able to eliminate the few very minor air pockets that had remained.Now, for it's actual performance. About a week after receiving the phone, I accidentally dropped the phone off and (thought that I had) cracked the screen. I figured that this was gonna be another $200 or so to get fixed, which I really wasn't looking forward to on a brand new phone that I had just dropped a small fortune on. I have the Spigen Tough Armor case for the phone, but of course, it fell in just a way that the screen connected with a brick corner. When I picked it up, I saw the cracked screen and was pretty disappointed (first picture). It wasn't until a few minutes later that I had pulled the screen protector off and realized that it had absorbed the entire brunt of the fall. The glass screen protector suffered ALL of the damage; the phone (as far as I could tell) had NONE (second picture- phone with screen protector removed). I was pretty amazed. I immediately went and ordered another one, and just placed it on today (third picture- phone with screen protector on, and cracked one next to it). The $11 (or, I guess, $22) that I spent for being an idiot that dropped my phone is a cost that far and away is worth it to offset the $200+ that I would've inevitably spent to repair the phone. Hopefully I don't drop it again, but if it were to happen, I have confidence in my Spigen Full Cover Glas Screen Protector.By the way, their customer service is outstanding, which I dealt with concerning the Tough Armor case. And, as much as I wish that I had, I DID NOT receive any products at a free or discounted price for this review (although I'd be willing to accept any now after the fact). I'm just a very satisfied customer.

It's taken me a long time to decide how i want to review this and we have a couple different experiences among my families four different iPhones. What I REALLY like about this screen protector is it's real glass. That also happens to be it's biggest disadvantage.Here's where the screen won me over...My wife's phone slipped through the crack in our sofa recliner. When she put the recliner down to go retrieve her phone, we heard a very loud "crunch" and knew immediately what had happened - so we thought anyway. Her phone got wedged into the metal reclining mechanisms and when she collapsed the chair, the glass shattered between the metal pieces. It turned out the loud crunch was the screen protector. Once I peeled it off, her phone was completely unscathed underneath. Not a single nick or scratch. If this had been one of the soft plastic or flexible screen protectors, it would have been her screen that would have shattered. There's no way one of the soft plastic screen protectors could have prevented the screen from cracking.My wife and I both have had one on for about a year with no issues, full protection. Over time though, the edges to start to chip off leaving you with...essentially a cracked screen. Eventually, as more and more pieces chip away, it definitely needs to get replaced as the sharp glass IS dangerous. This screen protector also will only prevent one major accident. So if you're accident prone, this is probably not the right protector for you as they're not cheap. My daughter was burning through one a month so we had to figure out something else for her.If you're careful with your phone though and mostly just need to prevent a major catastrophe; then this is the best screen protector that I've ever used.

I just put this screen protector on my new iPhone 6s plus yesterday and am very happy. The fit is great, and covers much more of the screen than any of the other glass protectors I was looking at. It does not go all the way to the edge, but gets very close. This actually works out well--I can use it with the Apple leather iPhone 6s Plus case, and there is only a very small gap on the edge, and if the glass went all the way to the edge the case would not fit.The kit comes with the screen protector, a small microfiber cloth, a code you can input on Spigen's website to ensure authenticity, and two sealed wipes. One of these was supposed to be a wet alcohol wipe, but when I tore open the package it was bone dry. This wasn't an issue for me because I had not taken the factory plastic off my phone yet, and I had spare wipes of my own handy, but keep this in mind if you need to clean your phone before installing the screen. It also does not include a rubber squeegee like most other kits, which you can use to gently apply pressure and remove bubbles, but fortunately I had one handy. A decent substitute for this could be a credit card wrapped with the included microfiber cloth if you don't have on on hand. They also had dust removal stickers in case dust accidentally gets onto the adhesive of the screen, but this was not an issue for me.In terms of installation, I had very few issues. As mentioned, they give you two wipes: one wet and one dry. You use the wet one to clean any smudges and residue off the phone, then use the dry wipe to remove any dust that gathers.There's a film on the back that you peel off to expose the adhesive, and then you align and set the screen protector using the earpiece hole and the Home button hole. There are two tabs attached to the front that help you hold the screen protector without having to touch the back or the sides, reducing the chances of getting fingerprints on the protector. Bring the screen down gently--to make sure I got a good alignment I started with the earpiece side, got that aligned, and then dropped the rest of the screen. I also kept the screen on during the installation so I could use it to help align the protector. A word of caution: if you do need to remove and reattach the screen, make sure there is NO dust in your environment, as it will instantly be attracted to the adhesive, and also DO NOT try to life the screen with the tabs--they are on a film on the outside of the screen, and all you will end up doing is removing the film and not the screen.Once the screen is down, use a squeegee to remove most of the bubbles. I got all the big bubbles out without any issues, but I did notice a line of micro-bubbles along the top and bottom of my screen--these bubbles look more like condensation that initially made me think I had some moisture or residue that got trapped under the screen until I took a closer look. I wasn't able to get these out with a squeegee, but they disappeared overnight once the adhesive and screen set.In terms of quality, the glass feels very nice and incredibly smooth. I see no difference in clarity or color, and the 3D touch works great (better than with the plastic cover I had on before for sure). The home button does feel recessed since the glass protector is thicker than most plastic films, but its still easy to press and I had no issues getting Touch ID to work. The edge to edge coverage and precise cuts for the Touch ID and earphone really makes a difference: I showed a coworker my phone today, and with the case on he couldn't even tell there was a screen protector on there until I told him. This really helps preserve the premium look and feel of the phone, especially compared to other protectors that just have cutouts for the earpiece and Home button.One negative I did notice is that there may be the potential for dust to seep into the edges of the screen--I will keep a look out for this and update the review if I notice this.Overall, I highly recommend this product, especially for the current price of $10.99. I do recommend making sure it will be compatible with your case--I can say for sure it works with the leather Apple case, but others that wrap around the front more may push up the edges of the protector or not even fit around the phone with the protector on. Also, there may be an issue with dust getting into the sides, which I will keep an eye out for.

ガラスフィルム自体は貼りやすくとても良い品だと思います。ただ付属品のスマホクリーニング用のウエットペーパーが完全に乾き切ってました。まぁモノが当時のiPhone 6s plus用ですので在庫品としては仕方ないのかなとも思いました。

Pellicola che copre TUTTA la superficie dello schermo, quindi è ottima per evitare che lo schermo si rovini o addirittura di rompa.Per esperienza personale, consiglio questo tipo di pellicola, perché protegge davvero lo schermo ed evita spiacevoli incidenti.

TL;DR: Great quality product and a definite must buy in my opinion.After having used the screen protector for a while now, I can confidently say that I am very satisfied with this product. However, for those looking for TRUE edge to edge screen protectors, this might not be the product for you but that being said, true edge to edge screen protectors are just a recipe for disaster as they can crack VERY easily due to the curves. Spigen has found the perfect middle ground, their screen protector is curved just the right amount that once its in a case, you truly have an edge to edge screen protector. My biggest annoyance with most other third party screen protectors has been that when my phone is in a case, they have this gap between the case and and the screen protector... this product SOLVES that issue for me.With that being said after using my phone for a few weeks, I have noticed that dust has gotten inside the screen protector where the proximity sensor is, which wasn't there previously when I initially applied it. However, that does not bother me at all, if it was the FaceTime camera that was affected, I would be annoyed but it is hardly an issue.

Great screen protector, one of the best ones in the market. Price is cheaper here in Amazon than the website. Save yourself the shipping cost.No finger prints. Spigen continues to innovate and find better ways of making that oleophobic later more finger print resistant.Works with force touch. Doesn't cause lag or delay. If you are still hesitant to buy this product, try it. It's cheaper and this is by far the best screen protector for your iPhone 6s Plus.

C'est parfait très simple à mettre ,il faut juste faire prendre de minutie , totalement invisibleMa soeur m'a même dit en voyant mon nouveau portable "tu devrais penser à mettre une protection " lolc'est pour vous dire !!!!!!!