New Version DC 24V 25A 600W Power Supply Adapter 110V AC to 24V DC Converter Power Supply 600W Switch Transformer for Winch Car Jack LCD Monitor CCTV Security Camera Car Stereo and More 24v Device

I've been chasing an undervoltage problem on a klipper printer. this was bought to replace the stock power supply. thankfully, it was a direct bolt-in replacement for the stock unit.

This replaced my ender 3 power supply it just a little louder then the original but not terribly bad. It does make preheating a lot faster on the bed. Just for informational purposes it does mount in the factory location and uses the power switch box and power in connector on the original power supply 2 bolts pull the housing off and 5 bolts to loosen the wires and voila attach to this new power supply reinstalled the connectors and switch and bolted the cover back on and mounted in the factory location hooked up the power wire to the printer and it was off to the races. checked voltage with a voltmeter and had a pleasant 24.5 volts dc.

This is a high efficiency switching power supply that puts out 600W at 25A for powering your LED installations. Designed for 24V LED strips, it can also run 12V strips with a little work. The unit is low profile for ease of installation. The PSU is fan-cooled to assure reliable service for years. It does have fan noise, so keep this in mind for your intended application. Ventilation must also be provided. If you're wiring an office, commercial display space, etc. Consider this product for your needs. It's designed for it.

I am using this to power a 24 VDC motor on a patient lift that I modified to pick up ZTR mowers to service the under side of the deck. DC power is very stable and works like a charm.

Whenever I plug power to it the fan constantly runs and it's not getting hot because nothing is plugged up to it the fan run on high

It's a good solution for low voltage needs. I have it mounted to the side of a cabinet in the garage, so it's protected from moisture and gets good ventilation.

The New Version DC 24V 25A 600W Power Supply Adapter is a robust and versatile power solution suitable for various applications, including 3D printing, electronics projects, LED strips, and various other 24V DC devices. Its high amperage, stable output, and protective features make it a reliable choice for powering demanding equipment.Key Features and Performance:High Power Output: The adapter delivers a substantial 600W power with a maximum current of 25A, providing ample power for demanding applications like 3D printers or multiple connected devices. This eliminates concerns about power fluctuations or tripping fuses when running power-hungry equipment.Wide Input Voltage Range: The adapter accepts an input voltage of 110V-240V AC, making it suitable for use in different regions and with varying power sources.Stable Output Voltage: The output voltage is consistently maintained at 24V DC, ensuring stable power delivery to your devices. This is crucial for sensitive electronics that require a consistent voltage supply.Protective Features: The adapter includes various features such as over-current protection, over-voltage protection, and short-circuit protection. These safeguards ensure the safety of your devices and the power supply itself.Efficient Cooling: The adapter has a built-in cooling fan that helps dissipate heat and maintain optimal operating temperatures. This ensures the longevity of the power supply and prevents performance degradation due to overheating.Compact Design: Despite its high power output, the adapter is relatively compact and lightweight, making it easy to incorporate into your setup or transport.Pros:High Power Output: Provides ample power for demanding applications and multiple devices.Stable Output Voltage: Ensures consistent power delivery to sensitive electronics.Protective Features: Safeguards your devices and the power supply from damage.Efficient Cooling: Built-in fan prevents overheating and ensures longevity.Compact Design: Easy to integrate into various setups.Cons:Fan Noise: The cooling fan can be audible, especially in quiet environments. However, the noise is minimal and not distracting in most use cases.Overall Impression:The New Version DC 24V 25A 600W Power Supply Adapter is a reliable and powerful solution for powering various electronic devices and projects. Its high amperage, stable output, and protective features make it a practical choice for demanding applications like 3D printers. While the fan noise might be a minor concern for some, it's easily outweighed by the adapter's impressive performance and value.Recommendation:This adapter is a worthy contender if you're looking for a reliable, high-power, and versatile 24V DC power supply for your 3D printer, electronics projects, or other devices. Its performance, features, and affordability make it a solid choice for hobbyists and professionals.

I really wish companies would put a little more effort into making clean electronics. If you buy a Meanwell brand supply, it is clean, well-made, and not toxic smelling. If you buy something like this, it will belch out toxic fumes because of poor manufacturing standards. I'm also not fond of the fact that this has screw terminals for the AC input. That makes it far more dangerous to use in an application like a 3D printer. You may reach in to tune your printer one day, and not get to reach out, if you catch my drift. This is better suited for some large industrial setting, with lots of air and ventilation. I can't recommend it for home use though. You don't want to be breathing this in.

Me va muy bien gracias 🙂

Ich hab dieses 24V Netzteil für einen 3D Drucker benötigt.Es ist sauber aufgebaut und ordentlich verarbeitet. Die Anschlussklemmen sind stabil.Die 24V Spannung stehen absolut stabil.Soweit perfekt für den Preis.ABERVon intelligenter Kühlung kann keine Rede sein und alles was dazu gesagt wird, kann getrost vergessen werden.Der Lüfter schaltet sich unintelligent sofort ein und hört sich an, wie ein Fön auf mittlerer Stufe.Sorry, aber das ist echt Unfug. So etwas kann man auch temperaturabhängig gestalten und dann wäre das Teil auch Wohnraum tauglich.Ich vergebe 4 Sterne, weil es von Preis und Leistung einfach gut ist.Die Lüftersteuerung passe ich an.Gruß

Sehr lauter Lüfter. Leider läuft der durchgehend voll