PeakDoHDMI to USB C Adapter 4K@60Hz,HDMI to Type C Adapter for XREAL One/Air 2 Pro/Air 2,Viture Pro/One,RayNeo Air 2s,Rokid AR Glasses,Portable Monitor from PS5/4,Xbox,Switch,Laptop,PC,Dark Green

Real-World Review: Using the PeakDo HDMI to USB-C Adapter for Interactive Meeting Room SetupIn a meeting room setup, a seamless way was needed to mirror and interact with content from a SMART 85-inch wall-mounted screen to a RICOH 15.6-inch portable touch monitor. The goal was to allow the audience to engage directly with the presentation using the RICOH’s stylus-enabled touchscreen. The PeakDo HDMI to USB-C Adapter turned out to be the perfect bridge.Setup Overview:- Source: SMART Board (HDMI output)- Display: RICOH 15.6” Portable Monitor (USB-C input with touch support)- Adapter: PeakDo HDMI to USB-C✅ What Worked Well:- Plug-and-Play Simplicity: No drivers or configuration needed. The adapter instantly mirrored the SMART screen’s content to the RICOH monitor.- Touch Interaction: The RICOH’s stylus and touch features worked flawlessly, allowing participants to annotate, navigate slides, and interact with content in real time.- High-Quality Video: The adapter maintained a crisp 1080p/4K signal with no lag or flickering—ideal for presentations and collaborative sessions.- Compact & Portable: Its small size made it easy to integrate into our cable management system without clutter.⚠️ Things to Note:- Power Matters: For consistent performance, especially with touch-enabled monitors, make sure the adapter is powered via USB-C PD (Power Delivery).- Cable Quality: Using high-quality HDMI and USB-C cables helped maintain signal integrity and responsiveness.📝 Final Thoughts:The PeakDo HDMI to USB-C Adapter proved to be a reliable and efficient solution for enhancing interactivity in our meeting room. It enabled a dynamic, two-way communication setup where the presenter and audience could collaborate directly on the RICOH screen using the stylus—without any technical hiccups.Highly recommended for professional environments where content sharing and interactivity are key.

I thought this product was going to be bulkier, but it is small indeed.People said it gets hot, but in my experience it just got slightly warm. I also read people complained about video quality, but it works great with my XReal One AR glasses (which are 1080p, so the fact that it does not supports 4K does not affect me).I tested it with my XBox Series X and played a 4K game, of course my XReal One glasses do not support 4K (nor this HDMI to USB-C adapter) but the video was as gorgeous as it could be on 1080p.I cannot speak to longevity, I just got it a few days ago, but so far I am very happy with this product. And thanks to its small size, I can even carry it in my AR glasses case along with the cables (see picture, the PeakDo can be seen in the small cables pocket of the glasses case).NOTE: If you are using this with XReal One glasses, make sure to properly configure the audio protocol on the XReal One, otherwise you get video but not audio.

Very happy that this allows my xreal glasses to display my xbox series x! Does require reset rather often. Have to unplug usb (power not glasses) and hdmi. then replug the USB power side followed by the hdmi to kick it back into gear. Small, but consistent, annoyance.Update: seems to be less of an issue for the last month or so. Whether the problem remains active or not these are easy to recommend.

I'll get straight to the point most are looking for: Yes, it fully works with the xreal air.However, there is one caveat to this I encountered. If you get the latest firmware update through official channels, you will be unable to get audio. It's supposed to allow you to hold the brightness down button for 3 seconds to switch into HDMI audio mode, which is what's needed to get audio from this adapter. However, on the latest firmwares, this feature is not working. Unsure if they intentionally broke it to try to get you to use their official adapter or if they are just incompetent at writing firmware.In any case, if you search for "xreal air unofficial firmware changer" on google, you can find a third party site that lets you change to other older firmwares. And sure enough, the one labeled "Windows Beta" works flawlessly with HDMI audio.TL;DR for those using this with xreal air, to get audio working:1. Search "xreal air unofficial firmware changer" on google, you'll find a site to change firmware. Use "Windows Beta" as your choice during the process2. Once that firmware is flashed, connect this adapter, get a video signal3. Hold Brightness Down button for 3 seconds until you hear the beep to switch to HDMI audio mode4. To change volume, hold the display on/off button for 3 seconds. Do the same to switch back to brightness controls.Once I figured out the workarounds and how it works, it's been a great addition to my xreal to connect PCs and consoles.

Worked well for a 2 weeks now doesn't turn on. It did get very hot.

Worked great for a day and the next day there isn't any audio through the HDMI cable. Swapped out cable and adapter I have on computer. Even tried plugging HDMI into the computer directly and all situations the sound works but when I introduce this device, no more sound. Picture quality is good though.

This little dongle works fantastically! I got these to use my Viture Pro glasses on a computer with a 14th-gen KF (no i-GPU) CPU, which couldn't run my glasses with just a USB-C cable. I haven't had any lag or issues using this dongle; I just connected HDMI and power, then connected my Viture cable, and a 3rd monitor immediately popped up. If you have a spare HDMI port open, this is pretty much plug and play.