FERRODAY Dual Gauge Co2 Regulator Beer Kegerator Co2 Regulator Beer Keg Dual-stage Kegerator Regulator CGA-320 Beer Regulator Co2 Kegerator Part Beer Keg Regulator Co2 Beer Gas Regulator Beer Tap Tool

working well

Purchased this back in January of 2020. I use it on a separate CO2 tank that I use when I clean my beer lines. So basically, when I'm done I shut off the tank valve and bleed the pressure down. The last couple of times when I've charged the line the tank supply gauge (0-3000 psi on the left side of the unit) has stuck on zero and I've had to give it a couple of sharp raps with a screwdriver handle to get it to read.Once it reads it's been fine, and when I bleed off the pressure when I'm done it returns to zero. The Amazon advert says "Lifetime service" so I've reached out to the seller to see if I can get a new gauge. I won't bother to send this back for repair, a new gauge is less than shipping.When I did leave this attached and charged when I first received it I didn't notice any regulator creep. I returned another vendor's regulator for just that reason.I'll post again after the vendor responds.Update - 2/16/2021 - Fastest customer service I've seen in a long time. Responded within 12 hours, asked for a picture of the unit for their records. I uploaded the picture the next day and had another response within 12 hours. They're shipping me an entirely new regulator, expected arrival 20 Feb. Superb service. I'll go out of my way to check their product list first before I purchase elsewhere.Update - 2/20/2021 - Gauge arrived on the 18th. Connected to my CO2 tank and left pressurized for 48 hours. No appreciable creep, very stable. I'll probably buy another gauge and keep my original regulator as a spare. They appear to use Loctite or similar as a thread sealer, I had to put the unit in a vise and use my 10" adjustable to remove the old gauge. I couldn't be happier, especially at this pricepoint.

The regulator that came with the beer kegerator finally died. It was never that great. This replacement is a marked improvement over the one that I was using for years. Adjustments are very precise and easy to make. I like that you can shut off the main co2 tank but leave the pressure to the keg open to monitor. I have not lost any CO2 with this regulator. My rebuilt kegerator is new again!

This is the second regulator. The first one leaked around the large screw behind the pressure adjuster. This one leaks in the same area. I don’t know if it’s a bad batch of regulators or if they are made poorly. Stay away from them do not buy.

Read the reviews. This is a piece of junk and is leaking CO2 after about 3 months of use. So now I am out of paying for this junk please having to replace my CO2. Should have known better!!!EDIT: Company replaced and new one is working correctly. Appreciate the company response

It was super easy to install on my 20l co2 tank. It helps me make super strong seltzer. Really easy to carbonate to a desired psi. Highly recommended. The instructions were a little convoluted. Watched a YouTube video and figuring out how to work it was a snap.Update. I did not follow the instructions and broke the 120psi unit. It was all my fault. I did not depressurize between bottles. I broke both the regulator and quick release cap. I'm still leaving the review at 5 stars because I got the 60PSI regulator instead of the 120psi. I love the quick release and instead of the knob. Makes changing my bottles so quick and easy. The only downside is when I get close to 50psi on the guage and then the pressure relief starts to let out CO2. Its more than enough for me.

This dual gauge adjustable CO2 regulator is a great value for the cost. I had problems when I received it since it arrived with a damaged pressure gauge. Fortunately, as soon as I mentioned the problem, the customer service team for Ferroday was amazing and worked with me to troubleshoot and eventually provided a solution of sending me a new one.They were very efficient solving the problem. I am really pleased!!Excellent customer service. Thank you so much!

I am using this excellent Ferroday regulator to produce carbonated water. I also purchased a Carbonation Cap (ASIN B01K4GGYT0) also made by Ferroday. This regulator is very solidly built and it took only a few minutes to setup. Use one of the two provided nylon washers to attach it to the tank. High pressure dial tells how much CO2 is left in the tank. Low pressure dial allow to set up an output pressure. Set-up output regulator to the output pressure needed between 0 and 60 psi. I first had difficulty to setup pressure higher than 30 psi on the output regulator, until I figured out that there is a locking nut underneath it that allows to lock in pressure you use often. Releasing the lock nut allowed me to set up a higher output pressure. It was easy to set up and now I have unlimited carbonated water at my disposal. Read ‘Be your own carbonated water manufacturer’ by Mark on Medium if you want to see the set up, price calculations or how to make your own Perrier or other mineral water you like to drink!