LLPT Double Sided Foam Tape 2 Inches x 50 Ft Durable Adhesive Weatherproof for Fill Gaps Attach Bond and Mount Uneven Or Textured Surfaces (T004B)

I have been using 3M tape for installing no hole solar panels to cargo trailer. I decided to give this a try in two inch version. Much, much cheaper, easier to work with and seems to be on par with 3M tape. I think this is a great value and great product. The 3M (1 inch) kept 3 100 watt panels for 4 years at highway speeds with one questionable mount. Tested LLPT at high speeds when fresh (before 72 hour fully cured time) with no problem, but time will tell, but I feel this will be better solution even if they cost the same.

Not as good as 3M VHB but still quite good. I stuck wooden letters to metal siding. One letter fell off overnight, probably due to my own failure to get the tape in just the right spots, and I couldn't get the foam backing off the siding without scratching the siding. Maybe some goo remover would work, but I got enough off that it's not too noticeable.It's not adjustable. Once it's stuck, it's not sliding or shifting without destroying the foam backing.

This has to be the strongest adhesive tape I have ever used. This stuff is nearly impossible to break the seal on once it's applied. And it would seem, the longer it sits, the stronger the adhesion. This is some seriously powerful stuff!That being said, removal is NOT easy. In fact if you use it on a wall surface, it's likely to peel the paint off the wall in an attempt to remove it (like what happened to me) almost lost my security deposit because of it. but if you are looking to say, add something to your furniture (I used it to adhere my USB splitter to my desk) and it works wonderfully.Over all, if you're looking for some double sided sticky tape that will stay stuck with a vengeance, this stuff would be perfect for the job.

This is a very large roll of tape, way bigger than I expected. I will definitely have enough to last a long time. And it works as intended.

I made a propagation station for my bathroom near a big window and wanted to hang the vases on the tile wall without having to drill through the tile. I tried Gorilla Mounting Tape which was a disaster where everything came crashing to the ground at 4 am. So I researched and watched review vids and found this LLPT tape seemed a much better solution. I followed directions, applied vertical strips all along the back of the wood holders and pushed them to the tile firmly. I waited longer than the recommended time to add the water vases. Because of the first fail with the Gorilla Tape, this time I put in a fail-safe of hanging wire attached to the edges of my holders that firmly hold it from the ceiling, just in case the tape failed. Good thing too because the next morning I found the tape indeed did fail on one holder and was beginning to pull on the others.For reference, I cleaned the tile with alcohol and a lint free cloth prior to attaching. The weight of one holder without the water vases is roughly a little less than 2 lbs. This weight seems fine on the tape. Adding the vases adds roughly 6 lbs. Meaning the total weight comes in around 8 lbs. The water vases make it front heavy which makes them begin to pull away from the wall at the top of the wood holder.The LLPT Tape claims to work on tile and hold 5-20 lbs mass weight per square inch of tape. I used about 30" of tape on each holder. With all that, applied pressure, a long wait time before adding the vases, and proper prep, this tape couldn't hold 8 lbs on a wall for longer than a day.Disappointed. Guess I'll have to find another solution.

I have an older sports car and the mirror fell out of the assembly. I tried to glue it back in place, but to no avail. I was able to repair my mirror with a little prep work and this wide tape. So far so good. This repair using tape saved me a good amount of money, since a replacement mirror assembly for my car is costly to buy even used, plus the time to install. Great tape.

Very strong for the price.I tested using a 1x1 square tube of steel to 1x2 aluminum and prepped both and the hold was impressive. Was an 8 inch piece and was unable to pull it off with perpendicular force. Any twisting or peeling and you obviously can pull the tape off with force, but for what it is designed for it works great. I will definitely be using it for a few projects and maybe buying more if it runs out

I have dozens of applications where glue just doesn't work. Sometimes the gap is too big. Sometimes the two items being joined are too flexible. Other tapes I have tried are just not strong enough. This stuff? Weee doggies ... works like a charm. God forbid you want to pull the things apart.

It’s not 3M but it is sticky and does the jobGreat value in comparison

One side sticks well other side not so well

S'est trés bien

I have to say, it was a good buy, the tape installed correct and smartly. I found no real bad thoughts of this product only that it was at a good cost and I bought two, you never know when you work on old crs if the need will come up again. Go get you some before it is all gone.

There is nothing to complain about, it's a good Tape