VADANIA20" Heavy Duty Drawer Slide with Lock #VD2053, 2" Width Up to 250lb Load Capacity, 3-Fold Full Extension, Ball Bearing Lock-in & Lock-Out, Side Mount, 1-Pair

Heavy duty, used to make a wall sliding gate for top of stairs. Holds up to 5 kids and dog hanging on it. The lock is nice so I can lock gate open or shut. Slides smooth. I wouldn’t hesitate to use in a high weight drawer.

These worked great for my purpose - a sliding shelf to mount a (heavy!) generator in an offroad trailer.Word of advice though - take special care when assembling your final product. I test fit mine and it worked flawlessly, then I had to break it all down for painting. During reassembly I accidentally swapped the outer rails around, much to my regret. (I didn't realize that they actually had a certain orientation they needed to be.) When sliding the shelf back in it wouldn't insert into the outer rails, and like a dope I forced it a little harder than I should have resulting in me having to force it back out again to see what the problem was. In the process I dislodged a pin mechanism in one of the inner rails. (Thankfully I saw the pin fall and didn't lose it.) The end result was me having to break it all down and reverse/flip the outer rails and then re-fit the pin into the inner rail. (Which wasn't very hard, but I was lucky because it could have broken.)So long story short, watch your slide orientation before final assembly. The finished product works like expected and is very solid/sturdy, locking in both the closed and extended positions.

These are definitely pretty rugged drawer slides. I don't know if they will actually hold 440 lbs and not sure I want to test it. Glad I went with these and not the lighter duty ones. They are a little bit of a puzzle to install. Worked best for me to install the drawer slides in their mounting location......and then attach the drawer to them. The are corresponding holes in the rails to access the mounting holes so you will have to slide the rails in & out to line them up as you move from mounting hole to mounting hole. No directions come with these. I used them for a sliding equipment/recovery gear drawer in the back of my Jeep. I'm happy with the results, no rattling or movement when locked in the in position. Probably have 200 lbs or so sitting on them.

They are heavy duty, good design and quality material

I've bought others in the past and they don't work as advertised.These work super smooth and hold the advertised weight

These slides are absolute BEASTS! Like, I mean Arnold Schwarzeslides! It's like the Hulk and Chuck Norris got together and decided to make drawer slides. Yeah, like that. The only negative thing I can say about them, and it's a super small negative, is that they are a tiny bit difficult to install. I actually built a plywood jig to hold the drawer in the right spot to get them aligned. They Do Not separate so once the mounting screws are in place, you have to remove them to take the drawer out. Other than that, awesome product! They are less expensive than most comparable slides I've seen too. Also, just a side note, mounting screws are not included. Overall, I am extremely satisfied. Five Stars plus overall.

Purpose: bought 48" (blue lock levers) for cargo slide in camper van conversion. So I was very hesitant to purchase, even though I had little choice because I wanted a tray slide, because of all the negative reviews about poor packaging. Well, I think Vandania read them too.Slides arrived on time, kudos to the shipper, intact and functional. In fact, the 2" tall slides were double boxed. The slides were boxed in a very securely sealed 2.25 x 2.75 heavy duty box with the lock mechanism end of the slides further protected from damage with a plastic cap. This box was in turn packaged in a 7x10 outer box.As for the slides, they do, and well. This brad does not offer mounting hardware like the other guys which I'm fine with. Mounting is specialized on a case by case basis; one screw does not fit all.What I find interesting though is that the Brand reps, in response to Amazon questions about mounting and locking, suggest the slides be oriented such that to unlock them one must lift up on the lever; something about how the latch mechanism is designed. In my case however, the slides I received are stamped L and R and if followed that placement, I would be pressing down to unlock. I agree with the Brand, the design of the lock mechanism favors lift-up to unlock so I'll be putting the R on the L and the L on the R. Besides, I don't have the clearance to push down to unlock in the closed position.

I was skeptical but I'm actually impressed, these really are the heavy duty industrial drawer slides they claim to be. I have a recording and editing desk and needed drawer slides strong enough to hold up a midi controller that weighs around 75 lbs plus the slab of wood underneath. This is actually my 3rd pair of drawer slides because it's the best I could find for the price, but they were terrible! I included a photo of the Home Depot pair I replaced, avoid these if you need to support something with weight.I was debating between the Vadania drawer slides and a slightly cheaper set and boy am I glad I went with these. The drawer slides handle the weight with ease and the midi tray actually glides now!I will say I am having a little trouble getting one side to lock on the in position which I will admit could very well be user error from how I put the desk together :) I really don't care enough to find out because the other side locks so it isn't noticeable.They are a little frustrating to line up but all drawer slides are and these at least lock so they don't keep popping out like cheap kind.I'll report back if anything changes but so stoked so far and very happy with these!

built a custom bbq slider outter rig for my RV bbq. These work great. very well built, thick steel, good roller bearings. would definitely buy this brand again for future projects.

Excellent product. After installing on a table top to slide back and forth for my steering wheel on my computer game so I would be able to get in and out of my chair. This worked perfectly. Now I can lock my table when I'm steering.

Works fine for me. It's Strong, durable.But sometimes both sliders doesn't lock together. Other than it's worth the price. Recommend

Be aware of the total length 24.5 when you buy 24 inch it's not mentioned and there's no screws with it, but looks really good quality.

Robustesse