Breeze - 62020H Power-Seal Hose Clamp, Worm-Drive, SAE Size 20, 13/16" to 1-3/4" Diameter Range, 1/2" Bandwidth, Stainless Steel

Good quality

I was putting in an irrigation system and needed a LOT of quality clamps (buried etc). I had some from Home Depot that were the same diameter, 'build materials' and at the same price point as these but these run circles around the Home Depot clamps. These are very high quality clamps, made in USA and clamped straight with no twisting. I put a bit of a torque load on each clamp at the fittings and there was ZERO twisting of the clamp or reluctance to tighten down. The HD clamps would twist, a few failed under load and you could see and feel the quality difference. This brand name IS NOW my go to for clamps. Nice to find a very high quality product that exceeds expectations.

I bought two boxes (20) of these clamps for my sports car cooling system. I need 60 in all to allow for double clamp on each of the many hoses needed to plumb up a rear engine car. There are the worst quality hose clamps I have ever seen. Even though I double clamped 10 hose attachments for piece of mind, I will be taking them all off and throwing them away. None of these clamps can be tightened. They snug down, but as soon as you tighten them, they skip back a thread. Worthless.

I own a farm and do my own irrigation set up & plumbing.I "LOVE" these clamps!What they don't tell you in the description is, the whole worm drive screw is anodized (Wont rust)and the slotted clamp is thick stainless steel that does not easily strip even when using a 1/4 inch drive !If the price of $8.90 remains the same & free shipping with or with out prime... I will be purchasing HUNDREDS of these over the next 20 years.Believe my review or not.. i don't care. I came here and purchased this after buying many junk ones on Ebay.This is a good product.

Yes, they are costly - you can get cheaper versions for 1/4 the price - but these can be made very tight and the screws NEVER strip. This can be the difference between the clamp working or failing in service. You can use cheap ones in non-critical applications, but if it really matters, use these !

I noticed these were made in the USA and seemed a bit higher quality than the regular ones you find.

Still rusts in salt water. ...

Terrible experience. Ordered (3) 10 count packs. First package had 10. 2nd package had 1. 3rd package had 1. Returned 2nd and 3rd for a replacement. Yet again received 2 packages both with 1 hose clamp. Absurd.