4 buttons For Chevrolet for Buick for Opel car key shell

It worked perfectly for my 2013 Buick Verano. It looks exactly like the old one!

Small modification like counter sinking and drilling a hole for the screw, and placed the Chevrolet logo on the back with hot glue, the push and release key from my original key fob doesn't lock and relock but I never use it so I hot glued it in place to keep it from trying to open. Very good replacement

I would have given it a higher rate , but it did not fit. Everything on it was perfect except the silver button to release the key. the one that came with it was smaller and had a different design than the one that was on my original key. And I was unable to use the key release button from my original key because it was to large to fit in the new fob. It says that it works for the 2014 model sonic but that was a lie.

What should have taken me 20 mins took nearly 3 HOURS. The Quality of parts looks great. Very close to identical. The instructions are HORRIBLE.. BLURRY PRINT. and missing the most important part (THE SPRING AND HOW TO ACTUALLY ATTACH AND WIND UP). LUCKILY YOUTUBE was there. For me, I could NOT swap over the KEY part in it's entirety as there are differences in sizes.. The spring and ALL the mechanisms for it are a SLIGHTLY different size so nothing on the original key will actually work.. Even the metal push-button for the release of the key is SMALLER than the original so won't work. The ONLY alternative is to pop out the pin and replace the original cut key with the blank (again not in instructions). However, even THAT didn't work for me because the SLOT cut into the original key where the pin slides into and stops the key from coming out, didn't line up. I had to use a drill bit to drill the slot bigger. THEN it worked.. ALMOST.. Now comes time to WIND the spring... Instructions are HORRIBLE for this. It says to attach and rotate the entire plastic cover around.. it's MUCH easier to just rotate the KEY itself otherwise you deal with the circuit board wanting to come out and parts popping out...

Make sure you're mechanically inclined to install these. They work well and revived my worn out keyfob. This is made in China and not OEM so you will have to push the PIN out to release the key of the metal arm on the fob. You cannot use the oem one unless you want the switch button to sink into the fob. Look for Google guides to help with install. I used a watch kit to separate the key, then a hammer to push the OEM pin through the hole that connects the key to the arm. The rest should be in the included instructions. Good luck!

The key case fit my key and remote well but the button was wrong. The button that flips the key has 3 small tabs on it but on this one they were not aligned properly with the factory key. I had to trim the button to make it fit and as a result the key does not lock in the closed position and will usually flip open in my pocket. The rest of the key works well and does what I need it to but I did lose the flip function and it was rather difficult to get it put together and I blame GM for making the factory key so hard to take apart.

I had to completely destroy the old cover in order to get the board out to install in the new cover. There is a small screw under the Chevy bowtie emblem on the replacement cover that allows for it to be easily opened. My original key fob did not have this feature however, which meant I had to pry / cut it apart. It took about 20 minutes, but was well worth saving the $100+ that I spent having the dealer replace my last one.

I had some difficulty winding the spring that flips the key out. Unlike the original fob it has a split cover that facilitates replacing the battery. It comes with the Chevrolet logo so you don’t have to use the one on the original case.

que le produit est conforme a la commande

Worked for my 2010 Camaro SS! Feels like a solid product. I wasn’t expecting the meet cutting to be $50 (Canada) lol but that has biting to do with the product. Was still way cheaper this way.

Boa qualidade e funcional

Come sempre la velocità delle consegne Amazon è impagabile e questo ormai si sa. Queste 5 stelle però, stavolta sono più che meritate dal prodotto e soprattutto dal venditore Car Key, che pazientemente e molto gentilmente ha risposto velocemente alle mie domande fugando ogni mio dubbio! Grazie di cuore ;-) Passo ora alla recensione dell'acquisto, nel mio caso per una Opel Astra J. Il guscio chiave è di ottima qualità, onestamente identica se non addirittura migliore dell'originale sotto certi aspetti. Qui non arriva a sorpresa un guscio spacciato e mostrato come "uguale all'originale", ma poi invece si tratta di tutt'altro e acquistabile per 2 Euro da altre parti; si riceve davvero un guscio IDENTICO a quello della chiave originale, con tanto di logo Opel in metallo, mini cacciavite a stella e un semplice foglio di istruzioni con foto a colori che spiega passo passo il procedimento per smontare e rimontare il tutto. Sono molto pignolo su certe cose e con tutta franchezza posso dire di essere rimasto assolutamente e completamente soddisfatto di tutto!! A chi come me preferisce mantenere nel limite del possibile l'originalità di alcuni particolari, consiglio vivamente questo prodotto e il suo venditore. Grazie mille di nuovo.

The shell doesn't accommodate the metal key, so the spring does nothing and it doesn'tstay open. I needed to use a file on the button so it would fit the kay, and the case the button came with. The trunk button doesn't line up with the chip so it's non-functional. The only positive thing I have to say about this product it at least I can unlock my car door now. Look for some other product.