Rain-X 800001810 Headlight Restorer - 5 fl oz.

So easy to us. Great results

this stuff works great, sanding the old stuff off is key to proper restoration.

I started with a very clouded headlight assembly from a 2012 Honda. I followed the instructions, but found that the Step 1 polish did not clear up the haze much. I thought I had wasted my money for sure. But, I was going to purchase a new assembly if this did not work, so there was no harm in being aggressive and trying again. But the 2nd time I got out some 800 - 3000 grit sanding discs and wet sanded the hazy plastic with a lot of force. Went over and over it, and finally it improved quite a bit. Not new looking, but definitely better than when I started. So, then I did Step 1 again but this time using much more force in the application of the polish. Also used plenty of polish, and went over and over it, pretty much scrubbing. It did look better then, but still not quite new even after careful cleaning. On to Step 2, the UV protectant. To my surprise, Step 2 removed even more of the haze and after curing for a few hours, the assembly looked pretty good and was again useful as the light from the lamp now passed through the lens.Overall, it worked Ok on a very hazy lens, but not without a lot of sanding and polishing. I would only recommend this kit if you have access to a rotary sander and at least 5 each of 800, 2000, and 3000 discs. It might take an hour or so of wet sanding, but in the end you will have saved the money for a new assembly.

Too much hassle. Never used it.

Before and after. I was honestly shocked that it actually worked.

Excelente producto

Cleans the yellow part but it’s not effective a 100%. You will see blur but little change. It’s better to go to the shop or purchase the sand and spray for better result.

Did good job