b-Voguish

Wow. This case has gone beyond my expectations and is an absolute steal. The tempered glass front and side panel are prestine, and they don't feel cheap at all. The screws that come with the case are also high quality. Screwing in the SSD or the Hard Drive were a breeze. The mounting on the power supply was no trouble at all. The cable management on this case is extremely easy because there are plenty of places to zip tie cables togethe. Not to mention, the bottom shroud hides the cables insanely well also. There is room for 9 fans, so I went ahead and installed fans in all the slots. With so much room in this case there are endless ways to customize and add cables without the worry of running out of room. If you're looking for a great case, get this one. Your build will not only be clean, but look amazing through this case. I would 100% reccomend this to anyone building a new system.

It's perfect for what I was after,

This is the easiest and most spacious case I've built a computer in. It doesn't look too big from the outside, but it has ample space for cable management and accessories and it feels very solid. There's a fair amount of space above and below the motherboard, making it easy to access the screws and plug in cables. The massive cable cutout next to the motherboard is very nice too. It has ventilation on all sides with a filter on the top and bottom and I can immediately tell that it has much better airflow than my old case, partly thanks to the 6 included fans (my old case had 4). The included RGB fans look great behind the tempered glass. The fan controller is nice (supports 10 aRGB fans + 2 RGB accessories), although it uses 6 pin fans and the speed can only be controlled by the remote control (as far as I can tell). It does support a hardware switch to change colors, but that isn't included (you could wire the reset switch to be the color selector instead). There is also a motherboard sync port which seems to be a 3 pin RGB input for color control, but again, the cable isn't included. The 2 led accessory ports seem to be standard 5V RGB headers, but you need small RGB to standard RGB adapters. The accessory bag is pretty nice, it has an assortment of different screws, including radiator screws, along with a buzzer, and blank expansion plate. I wish it included the RGB adapters for the fan controller because they're somewhat hard to come by, but I was glad to see so much variety in the included parts. Finally, the case comes with no documentation and there doesn't seem to be a manual online either. It's fairly straightforward, but it was a little hard to tell what screws are meant for what, and there are no details about the features on the fan controller. Overall, for the case, plus 6 aRGB fans and a 10+2 fan controller, it's an amazing deal. While I wish it came with a manual, I'm very happy with the purchase and would definitely buy it again

For the price, this is a great value. The tempered glass looks nice, and the case is pretty well made. The metal is a bit on the thin side but that shouldn't matter as long as you're not forcefully pressing against it. It doesn't come with a manual but the parts it comes with are mostly self-explanatory if you're familiar with cases. You will need to either use a low profile CPU fan or liquid cool your CPU, since the case is too thin to accommodate vertical CPU fans/heatsinks. Also, the front glass will eventually accumulate dust on it, but it unsnaps pretty easily to clean. Another important point if you decide to get the one with preinstalled fans (and fan controller) is that the fan controller requires an ARGB (JRAINBOW) connector on the motherboard. My MSI motherboard doesn't have that, so I can't control the fan speed or color from software, and have to use the little remote control that comes with the case. It works, but I'd prefer software control from within Windows rather than a remote that can be lost or misplaced. Overall, it's decent quality for the price point, but I'd recommend getting the model without fans included, and spending a bit more on 3rd party fans and controllers that you know will work with your particular motherboard.

Looks pretty cool fans are easy to set up yeah it's awesome

This is the second time Ive bought this case. First one was amazing for price. Secind one was bad. Missing all its hardware, it was used the motherboard standoffs were missing all except two of them. The peel away plasctic was crumpeled up and reattached. Obviously used before... but the box it came in was new, with new tape untampered. They threw a used case in a new box without the hardware, slapped a 10% discount on it and said it was new.... thats pretty shady. If i didnt need a matching case I would go with another brand case. Hoping tge third times the charm... Moms new PC will have to wait until after Mothers day now.

I absolutely LOVE this case now that I have the lighting working with my motherboard. It was an absolute STEAL for how nice it is and the fans and controller it comes with! This case comes with SIX fans attached to an ARGB fan controller. There are 3 ways to control the lighting: 1: Use the included remote to cycle colours and presets. 2: Connect a button to the 2-pin connector to cycle through presets. This is not included, but you can easily attach the case's "RESET" button to this connector and use it to cycle. 3: Connect the fan controller to one of your your motherboards ARGB headers. Many people have been confused about how to do this, so let me explain: The case does does not come with a cable for this, but I was able to contact Bbears and they sent me one for the cost of shipping. It's a proprietary 3-pin cable to ARGB adapter. Simply connect this between the "motherboard sync" connector on the fan controller and any ARGB header on your motherboard. Then, tap the "On" button on the remote to switch it from presets to motherboard control of the fan lighting. The presets look beautiful on their own unless you have other lighted components you need to sync with. The photos and video in this review are using schemes I made using OpenRGB and AuraCreator The fans must be connected to the included fan controller. They do not have standard fan and RGB headers.

So I don't like that it doesn't come with any fans. I was surprised when I opened it up and found none. I went back and read the entire Amazon listing and did find in the question section someone asked if it came with fans and the answer was NO, but the listing sure does not make that clear and makes it look like it does in the pictures. In retrospect, I think it probably makes more sense for them not too because you really need specialty fans to get the best cooling here, and if they'd added those, the price would have been significantly higher. I explain below. As to the people saying their hardware gets hot, I suspect the main difference is what you are running and the type of fans you have. If you are running a brand new micro-atx motherboard/cpu and a big GPU, you aren't likely to see a big heat issue if you tune and face all your fans CORRECTLY. I would suggest however 3 - HIGH PRESSURE 140mm fans for the 3 front intake fans because the glass front obstructs direct airflow to them. High pressure fans will pull more air through the slits between the glass front and the case than a standard fan will. A standard fan will flow more air, but they can't pull or push air well against restrictions. The difference in the fan is just the blade width. The wider the fan blade, the higher the pressure the fan can transmit. I use Fractal High pressure fans. I specifically bought this case for its E-ATX capabilities. I am running a dual CPU server/workstation motherboard, and I can attest that this thing definitely heats up quickly with this setup. For this price point and case size, I can live with managing the heat situation, but its certainly not exceptional for a case. The biggest issue I have faced and its worth noting is that if you are running an E-ATX board, the TOP COOLING FANS WILL BE PARTIALLY OBSTRUCTED. This means you will need to purchase slim 15mm thick fans (120mm or 140mm) if you want to use the the top fan mounts. There are not very many choices here, and mostly they are not cheap. The design is otherwise simple but elegant. I like the glass front and side panel with a hinge, and the isolated area under the board for the power supply. I also like that it fit my Supermicro E-ATX dual cpu server motherboard. There was only 1 standoff hole that wasn't used, and it was within 2 inches of another standoff anyway, so no stability issues with mounting or board flex. I don't think I've owned a case before that had no external drive bay slots before, not that you need those nowadays. I knew it had none when I bought it, it it really didn't hit me until I started looking at accessories to buy and was seeing external drive bay stuff I couldn't buy that I would otherwise have. No biggie though. In all, just be aware of what you are buying this for, your budget, and its shortcomings and I don't think you will be dissatisfied if you keep your expectations reasonable. Just a word to the wise, if you weren't aware it does not come with fans, you might want to make sure you get all that figured out before you buy this case, because depending on what you are going to use it for, you may need a more custom configuration.