Heavy-Duty Full Motion TV Wall Mount - Articulating Swivel Bracket Fits Flat Screen Televisions from 42" to 70" (VESA 400 x 600 Compatible) - Tilt Swing Out Arm with 10' HDMI Cable

Excellent product, reasonably priced, used for my new LG OLED65E6P - comes with almost everything you need for installation including excellent hardware (excellent quality and strength hardware for secure installation) - mounts easily between standard 16" spaced wall studs, instructions are adequate, even comes with a small nut wrench & small level to be used for leveling the wall mount. It is very strong (100 pound screen) & can easily support my 65" LG OLED screen.Nice front to back tilt (locks in place), easy to adjust left, right, tilt and scissor function to either push screen flush with wall or pull it out up 19" from wall. Plastic snap on covers for hiding cable and mounting bolt screw heads for smooth lines and clean finish. Installation is 98% one person job as wall mount is in 2 main pieces, the main bracket that mounts on wall and the mounting plate that bolts to back of TV. Once ready to mount TV it is recommended to have another person help lift and slide TV onto wall bracket, once TV is slid onto bracket you no longer need your helper as it is locked on by weight of TV, just add two locking bolts to prevent TV from lifting off wall mount.Another cool thing is with the LG TV, the bottom brace of the mounting bracket lines up with the bottom of the TV (requires some movement of bracing bracket assembly to ensure proper fit and alignment) so measuring TV height from floor to bottom of TV is simple by using the bottom brace as measuring reference point - I mounted mine 38" from floor to TV bottom (56" from floor to Center of TV). At this point you can use tilt function to position TV screen downwards towards the seating area if needed.Tools needed - 1) I used a longer Level (36 to 48 inches - optional) to make it easier to draw a level line between 2x4 studs2) A stud finder (optional) - once 1st stud is located then easy to find the second (measure 16")3) Tape Measure or yardstick for measuring and for determining the correct height of TV / TV Wall mount4) Drill or Drill/Impact driver (to drive 4" long hex bolts into the 2x4"s) or a regular drill & wrench/socket driver5) Medium Screwdrivers (Philips & Flat tips)6) You can use some grease to lube the lag bolt threads to make it easier to screw into the 2x4's if you are using a manual wrenchChris

Very nice mount, easy to install, study construction and works well on both my smaller and large flat screen TVs. I bought two, one for a 40 inch and one for a 65 inch and both are working exactly as advertised. The mounting is solid and allows full movement in or out, as well as a reasonable amount of angle to each side. The smaller tv can be swiveled up to about 75 degrees from center and the larger tv can move about 30 degrees either direction on swivel. The tilt is easy adjust and solid when locked. This seller was prompt and packed the product well. Very pleased overall. If you want a study reasonably priced mount, I recommend this one.

This is a fantastic mount. It is well designed, and well thought out, from the aesthetic and consumer aspects.Those who say it does not mount 200mm x 200mm VESA spacing are dead wrong. My 55" TCL Roku TV (32 lb) has 200 x 200 mounting centers and it mounted perfectly. Even the packaging states on the outside that it mounts 200 x 200.I love the shrouds that cover the wall mount and also serve as wire routing. Very well thought out. It covers the ugly skeletonized frame that most mounts leave you with. It moves easily and the balance of the gimbals are fantastic.I am a designer by trade and I know a good or bad design when I see one. This design is one of the best that I have ever seen.The price was amazing. Even at Walmart, a mount of this quality would have cost over $100.For informational purposes, the wall mount holes are 16" wide X 14" high.I would recommend this mount to anyone who is looking for a high quality mount that is strong, functional, and aesthetically pleasing.

I don’t usually write reviews, but this product is fantastic. It’s great quality and a fraction of the price of something similar in stores. I mounted a 65” TCL Roku Tv.Assembly takes about as long and is about as complex as other tv mounts that I’ve purchased. The directions could be better, but there are YouTube videos for this specific product that helped a lot.Note: I had to work out-of-order than the directions since I had a fixed area that the tv had to be mounted in. Meaning, instead of mounting the parts to the wall first, I mounted to the tv first, assembled the part that’s supposed to go on the wall and “attached” it to the part that was already affixed to the tv, then used the cardboard from the packaging to form a template for the four holes where it affixes to the wall. I located the non-standard studs (16” apart for the vertical studs, a must for this product) and used the template to mark where to place the wall portion of this product. Then I attached to the wall and mounted the tv. This worked well for me but is unnecessary if you don’t hv the space restriction that I had.The result is that the tv has a very sturdy mount that can articulate in all directions. Very happy with this product.