3M Black Stripper Pad 7200, 24 in, 5/CaseGreen SealGreen Seal

We use this on our Italian tile floors in our hotel lobby. It is the best scrub pad I have found to work on the heavily trafficked floors. Our floors are white and needless to say are impossible to keep looking good in heavy occupancy months. Dirty work boots and athletic muddy cleats are a real challenge to our hotel but these pads mounted on our floor buffer make everything look like new. They last between 1-1.5 weeks depending upon use. We use ours every night for about 1-3 hours per night on different sections of the floor. This product is recommended by me

It did the job I needed it to do. Was cleaning a wood floor to re-coat and needed something to buff it up and remove the shine. All I had was an old Cyclo floor polisher so I set it on top of the pad with a brush to grab it and went to work. I know it would have worked better and more aggressively with the appropriate buffer and backing pad but it did just fine for what I was doing.

3M makes a 14"x32" sized pad of the 7200 series just for the Clarke Boost 32" and other similar autoscrubbers (14x32). I will write a follow up review of this pad when it will be used.[edit]Used the pad last night to strip out a portion of hallway. Pad performed well and best of all, no old floor finish loaded up on the business side of the pad! I used this pad with conjunction of a Clarke Boost autoscrubber and the action of the machine (picture an over sized orbital sander) kept the bottom side of the pad clean throughout the stripping session.I have had experience with the 3M SPP pad (also sold here at Amazon) as well which according to Clarke should strip off all old floor finish (no it doesn't but it gets close!). The SPP pad is an excellent top scrub pad but it doesn't remove all floor finish. So here is how I use the 7200 pad w/ the Clarke scrubber:1. Mix your stripper solution as per the instructions. If it's less than 6 coats of floor finish, then you can dilute it some. Mop on the stripper liberally and let it dwell at a minimum of 10 minutes.2. Place the 7200 pad on the machine. Lower the pad mechanism. Turn your water level to just barely above minimum. Go slow! 1st pass, strip with the squeegee UP.3. Make another pass after completing the 1st pass this time with the squeegee DOWN, vacuum on and the water level turned up from 1/3rd to 1/2 of full. The higher water level will flush out the pad. I did this and there was no old floor finish residue on the bottom of the pad. Floor stripped out fine!With this pad + an orbital autoscrubber (e.g. the Clarke Boost / Tomcat Edge Magnum)+ properly mixed stripping solution = a stripped floor!

I work as a school custodian. If you deal with floors on a janitorial/custodial level and want to mitigate using stripper as opposed to a great top scrub this pad will make you extremely happy and your work a lot easier. When you combine it with stripper…it is an amazing one and done job even on the toughest of stains that generate in classrooms from lead, wheeled teachers desk chairs, markers, you name it. I’m a fan.

Great pad for valueI'm currently using in a school im a building operatorI clean them out i stick the pads in stripper water to keep reusing them I bought 2 boxes of the 7200 razor pads they work greatI bought a box of 7300 which are thinner and more aggressive I prefer 7300 razor pads their better I did most of my school on 2 boxes of the 7200 razor pads

I did not use these pads for scrubbing floors. I used them for my pond filter material. Awesome performance.

Product does a great job at getting up dirt and debris but also stores most of it in the pad causing difficulty in continued use.

I believe the order is supposed to come with 5 pads total, as I have ordered through this same order before. This time, I have only received 1 pad. I will try to get in contact with the seller.Otherwise, the pad itself works great.

It’s not a tree M3 minutes after me working there Pad it broke and splatter all over the wall. I do not recommend.

shipping was very very very very badavailability very bad