Discharge Valve Part Number: 00631199 for Bosch Dishwasher

Fits perfectly and does the job!!! Highly recommended.

Fitted in nicely to fix my dishwasher having got an error, bargain price compared to paying someone to fix it or replacing with a new dishwasher. Months later still working great. Try YouTube for a how to video to install it, took about 30mins.

Easy to fit, fixed dishwasher, happy customer

I have a 5 year old Bosch integrated dishwasher - had the error E19. the info suggested replacing this valve. fortunately the dishwasher is currently freestanding so only 1 screw and panel to remove to access the value, 10 mins to replace and DW working perfrectly now!

Worked a treat. It was easier than I thought it was going to be to install.

Turn machine off and unplug!Left side (facing dishwasher door) off. Two screws at the front, one at the rear (Series 2 Dishwasher).You will see the Discharge Valve at the bottom right corner facing the machine side on.Put towels on the floor to catch the water! Push blue clip at the right rear of the contact to remove the power source.Twist the valve clockwise towards you, and wriggle out. Some water will now flow out.Make sure the red end is out, also the O ring does not remain behind. Pop new valve in, make sure it seats properly (Screwdriver behind the valve to give it a gentle lever) and then turn valve anticlockwise to seat the tabs.Put the side back on and replace screws. Plug in, turn on.Run machine on empty to test for leaks. Takes all of 15 minutes to do.Quick delivery on the part and a decent price too!

An easy replacement and is working well

Perfect fit original item( You could use a little bit of dish soap to act as a lubricant for the rubber seal)One thing to remember they give you a plastic sheet with the updated solenoid( The part number is newer than original one) The sheet goes in first it basically diverts the water away from the bottom of the dishwasher ( which has a flood sensor built in E:15 error ).You will need a few towels to catch water ( if once you have put back together you get the error tip the dishwasher backwards and mop up the water that comes out from the base )The actual solenoid clips in from both sides as you turn, make sure it's in both grooves ..Good luck plenty of DIY videos on YouTube the internals are basically the same we have a serie 6 and the videos were for older models but almost same once sides were off