Fuji Spray9600-G - Gravity G-XPC Spray Gun

Compact spray gun fits inside of cabinets to into tight spaces, perfect for water based paints and urethanes, works great on horizonal surfaces due to the cups ability to swivel in almost any direction even for overhead spraying. Very easy to clean, Great spray gun!!

The G-XPC Gravity feed gun is the best I have used, I started with a fuji bottom feed siphon gun in 2006, I still use the same Fuji quad pro turbine from those days tho run the G-XPC.I was getting tired of not being able to use a whole cup of finish. I started to fall in love with the gravity feed cups when I worked for a cabinet company last year, they used old DeVil Bliss finish line guns which I have heard are not quite the same anymore, but they were easy to use and clean. So I ordered this Fuji G-XPC seeing all the great reviews!I love it, its smaller in stance to the DeVil Bliss guns so it fits in tight spaces better, I use a hose whip at the end of my rubber hose for maneuverability, and I love how I can adjust the cup angle for top or bottom spraying. The cup pressure hose is a quick-connect fitting so it’s easy to press release for cleaning, I make sure to wipe any finish off the rubber seal ring in the aluminum lid each time With solvent, so there is no buildup hardening. I’ve been running precat lacquer finishes with it and use an acetone solvent to clean it up which runs through very easily, I usually disconnect the pressure hose and shake the kleenup solvent around in there, then run the out the nozzle, I do that twice, then I leave a little lacquer reducer in the cup to keep it until the next I spray. I like the pressure adjuster on the side of the gun, that is something I’m not used to but is a major improvement of the gravity gun I used before. I find this gun easy to use and leaves a very nice finish, Thanks Fuji!You can see above I pre-sprayed the inside of that tube, but I had to come back for touchups, and the size of the gun helped immensely, along with the rotating cup.

I have an approximately 15-year old Fuji Q3 with an SC-1 siphon spray gun (all aluminum gun), and I was looking either for a conversion kit to turn my current gun into a gravity spray gun or for a newer gun to add to the tool chest. I contacted Fuji one evening, and Derek Campbell responded the next morning and answered two or three follow up questions during that same day via email. He told me what conversion kit I could buy, which currently offered gravity feed guns would work with my turbine, and what minor modification to my Q3 I would need to make, so that the newer non-bleed guns would work with my older Q3. All that required was drilling an existing 1/8" bleeder hole out to 3/16", which was located in the manifold outside my Q3 case. That was easy.I build furniture and cabinetry as a hobby, and I picked the G-XPC, as the tilt-feature for the gravity cup will let me spray in any direction, including upside down inside case work. I used the new gun with my old Q3 this evening to spray M.L. Campbell MagnaKlear, which is a pre-catalyzed conversion finish, on some Andersen Woodwright double-hung window frames and sashes we are installing. I sprayed half this evening with the new gun and half last week with the older siphon gun.The G-XPC was absolutely fantastic. The spray pattern and volume were easy to adjust, and the finish went down flawlessly. I was a little worried at first when I ran some straight lacquer thinner through the gun to clean it out and test the controls. It dripped around the large threaded collar that holds the spray nozzle in, however it didn't drip at all with the MagnaKlear running through it, even with it diluted 25% with lacquer thinner.After 15 years, my Q3 is still going strong, and I am very happy with the service from Derek at Fuji and with my new G-XPC.

I purchased a Fuji Spray Q5 about five years ago now and love it. When I ordered it, I decided to go with the T70 cup gun which is an awesome gun also. I thought that I would mostly be doing cabinets and such and that the larger capacity would be beneficial. It is a great gun, but I have always struggled a bit when I had projects that needed to be sprayed parallel with the ground and projects that were in close quarters. When I ordered the Q5 I debated on ordering the 96-GXPC swivel cup gravity fed gun along with the package to address these situations, but funds were tight at the time and the entire package is not inexpensive even with only one gun.I finally broke down and ordered the 9600-GXPC and have used it on my first project. Oh, how I wish I would have purchased it a long time ago! This gun is a dream to use. It sprayed the lacquer used on this project perfectly with the 1.4mm included needle and cap set. The swivel cup was awesome as I had to spray straight down on the letters of the solid wood sign I just completed. Clean-up was easy and straight forward just like my other Fuji gun and the finish turned out flawless. I probably will order a 1.0mm needle and cap set in case I decide to shoot any super fine finishes, but the standard needle and cap will do great with most clear finishes I would imagine. Can't be happier and I highly recommend this gun if you have a Fuji HVLP system!

Second day shipping. As fast as I expecting. Because I can not wait, I did a test painting of cabinet side board with water base paint. The result is good and reaches very corner spot. I am happy with the gun.

Received my GXPC HVLP gun today. What a game changer, so little over spray and so easy to control. I have previously been spraying all my projects with IWATTA guns, compressor fed, I could get a good finish but always a lot of over spray and excess air. Can't wait to get my other air cap sets that I have ordered.Thanks fujispray for a great product.RegardsBruce

I have been using the Fuji Spray system for many years. Several years ago I upgraded to a larger turbine so thicker paints were spraying better. I thought I had lost my spray gun in a recent move and ordered a new one off of Amazon. It arrived in only 3 days - Excellent service! I am excited to be able to spray cabinets again with the great finish the Fuji system provides.

Solid build quality. Good balance. Wish the cap sets were cheaper but very pleased with purchase.

Bought this to replace my old gun which had an air leak, great finish quality every time.