Rubbermaid Small Horizontal Resin Outdoor Storage Shed With Floor (4.5 x 3 Ft) Weather Resistant, Beige/Brown, Organization for Home/Backyard/Pool Chemicals/Toys/Garden Tools/Porch/Patio Cushions

I bought this item a few months ago and just got around to putting it together. After laying out the pieces and reading the printed instructions, I searched for a video showing the assembly process. No joy! So I read a few reviews, learned of some potential problems, re-read the instructions, donned my work gloves, and picked up my rubber mallet.Before you start, be aware that you really need to do this on a hard surface. If your shed's ultimate location is on your lawn or other soft ground, DO NOT ASSEMBLE IT THERE. Yes, moving it once it's put together is a chore, but trust me on this, it's necessary. Also, you'll need plenty of room to make assembly easier. Finally, I put this together by myself, but for a lot of buyers it should be a two person job.I ran into the first problem right away. The instructions say to snap the left and right side/back pieces together, and it sounds easy. Don't try to do this with the pieces upright. Lay them flat and bend each side part upright until it snaps in position. Butt the two pieces together so the four connections line up. Forget the mallet. Step onto the pieces and then stomp on each of the connections until you hear each one snap into place. Once that's done, lift it back upright.The next step is to slide the floor piece into place at the bottom of the sides. If you look, you'll see two places on each side where the floor can be set into grooves on the sides. Line those up and then, standing in front of the partial shed, grab the front of each side and pull them so the grooves and tabs are in position to go together. Kick the front edge of the floor piece until the tabs are in the grooves. You won't get them to snap into place yet. Tilt the whole thing toward its front so that the back is topmost. Grab your mallet and bang on the four places where the floor meets the back until you hear and see them snap together. Once that's done, stand it back upright.Time for the doors. Both are added the same way and it doesn't matter which you do first right now but I'll write this up starting with the left one. There's a pivot pin at the top of the door that fits easily into a hole in the side piece. There's another pivot pin at the bottom that's not so easy. With the top pin in place, push the door into the more-or-less closed position while lifting up on the right edge so the bottom door pin rides up onto the floor. Push the door so the bottom pin is heading toward its floor hole and it will jam itself into position so you can let go and bend down to see where the pin is relative to the hole. Bang on the door with your mallet while watching your progress and you should be able to get the bottom pin in correctly. It isn't difficult but you do need to watch what you're doing. Then do the same thing for the other door.The last piece is the top, and it will be easier with two people. Hold the top up over the rest of the shed so the metal prop-up rod dangles over the slot in the top front of the right side piece. You need to rotate the top counter clockwise while holding it flat so that the bend at the bottom of the prop can go into the slot. Once it's in, rotate the top back into alignment, then lower it to line up the hinge points at the back. Bang on them with the mallet until they snap into place.That's it, you're finished. Not counting the unproductive time I spent trying things that ended up not working, the whole assembly took me maybe 20 minutes, and would have taken less time if I'd had a helper.I like the shed. It sure feels sturdy now that it's assembled, and it appears to be reasonably weather resistant for the way it's built. My only real gripe is poor, or at best inadequate, instructions. Rubbermaid would be doing themselves and their customers a favor by putting together some simple YouTube assembly videos for this product line. I'd volunteer but I'm old, fat, and homely.

This is my 3rd one, my first is about 20 years old and still in use and is what prompted me purchase another one. I received the second one about 2 months ago and when I saw this one on sale I could not resist. I put shelves in them as they are very roomy and use them for yard storage. I live in a climate where winter is the longest season of the year. This new one will store my snow blower. Easy to assemble, easy to get in and out of (great functionality). Neighbor ran sprinkler and it over sprayed on it; now leaks.

Good thing the parts & instructions were attached to the item as the box arrival was pretty ugly. Went together easy enough if you follow the assembly guide. 20 minute job. The lid closing has a quirk, where it wants to hang up on the front supports and will sometimes pop out the hinge. Hinge will snap back in but it is annoying. Have to rate the particle board shelf as lacking in sturdiness. In a month it has developed a sag with very little weight on it. It could have have be made of plastic and it never sagged. Water will puddle on the lid top. A small change it the design slope could have prevented the water puddle stains which detracts from the appearance. Weatherproof enough for pool chemicals & supplies. Not sure I would want to store cushions and the like in it. Still, as a Rubbermaid brand, it last along time.

I have to say that I was worried on ordering this after reading other reviews, but I think there are two issues that need to be address. One, it arrived in a very large, cumbersome flat box and two it isn't the easiest to put together.Amazon left the box right up against my house by the garage. So the delivery was done with care & the box was in good order. I had to carry each pcs. by hand from there into the backyard. It is very sturdy, heavy & waterproof. No complaints there.However, when you put it together there are no nuts, blots or screw. It instead, physically pops together and here is where the problems begin. One needs a friend and a very strong mallet. Because in order for it to be assembled, especially the floor, you need some seriously good muscles. Which I completely lacked.I gave up and got my neighbor's muscles. I held, while he whacked away with my heavy mallet, pounding it into submission. His muscle strength made all the difference in how it fit together. You may not have such an agreeable neighbor, so just know that going in.I love it now that he properly fit it together. It holds all the cushions & pillows to my outdoor furniture. I live in the North Carolina were we get a lot of biblical weather. It has already done well with one major storm. The whole thing was dry as a bone. So great product... if you have strength to put it together !

Why did you pick this product vs others?:Easy to assemble.

P have had a Rubbermaid medium storage box on the pool deck for the past 20 years and it is still in great shape. So, although you can pay less for other brands, I choose Rubbermaid again for this larger capacity utility box. I love that there are no metal parts to rust out or snap off. The assemble was easy, taking me about 30 minutes to complete alone. If you have had Rubbermaid products before you just know how to snap it together with minimal struggle. It fits right in with its older companion and fits my lawnmower, power washer, large sprayer, 40 pound bags of pool salt and a variety of pool supplies. I stay with Rubbermaid because Rubbermaid stay with me!