IMV708 W10408179 4389177 Whirlpool Kitchenaid Kenmore Refrigerator Water Valve by Robertshaw (Original Version)

I bought this following a link from a diy YouTube video after finding water leaking from the dispenser in front However I looked behind the fridge only after the part arrived and found 2 issues: my existing was a double valve that included the inlet and rhe dispenser valves reverted together. Also my inlet was copper tube which I was a bit unsure of unscrewing. My first thought was to return this, but it was easy to break the rivet to separate the existing inlet valve from the dispenser valve. Took about 10 minutes with a thick flat blade,and pliers being both firm yet gentle and slowly going around the rivet pulling the two apart. Didn't have to undo the copper tube from the inlet. It was easy to push in and release 3 plastic tube's. Just make sure to push firmly and all the way when inserting into new valve. If you get confused with which goes where, just know that the hole located separately on this valve takes in water from the fridge filter - if you look under you can follow the line to the filter which is also a larger diameter hole. The other two holes go to the dispenser and ice maker and are also of differing diameters The screw holes on this valve lined up with the inlet valve screw holes perfectly and just pressed the two together and screwed right through. Tested for leaks with running dispenser before pushing back. Flushed couple gallons before use. All good and no more leaks. No need to call repairman or buy a new fridge. At least not for this.

The Ice Maker Water Solenoid failed on my 2002 Whirlpool Gold Refrigerator, and I needed to replace it.The OLD solenoid valves had screw-on barrel nuts to secure the plastic tubing to the valves. This NEW design uses PUSH-ON connections. I used a sharp razor knife to cut the tubing close to the connector and was pleased to learn that the diameter of the plastic tubing worked perfectly with this new solenoid valve assembly. I also need to use a Dremel tool and a cut-off wheel to sever the old metal bracket that also contained a screw-on connection between the water intake line and the fridge water filter. I installed this new valve assembly in the same bolt holes as the original valve solenoid assembly, and attached the old water intake bracket just above the new water valve solenoid bracket. You will also need to cut a small notch in the cardboard panel on the rear to accommodate both brackets. In my case the original solenoid measured 2.6 ohms of resistance at the electrical contacts. (This is nearly a dead short!) This condition caused the original LED icemaker sensor and controls to fail. Luckily, these two small circuit cards are available separately through Amazon, and are quite inexpensive and easy to replace.

Fit great

Our older Whirlpool side by side refrigerator water dispenser was taking forever to fill a glass. Researched on YT and found the most common cause was this valve. It looks identical to the oem and installed with no issues. Water is now flowing like it used to when fridge was new. Ice is also looking normal without air bubbles. Appears to be well made. I would highly recommend this vendor and part. After installation make sure to run a few glasses thru until water appears clean.

The IMV708 W10408179 4389177 Refrigerator Water Valve has been a refreshing addition to my kitchen, ensuring a consistent and reliable water supply for my refrigerator's ice maker and water dispenser. With its compatibility, ease of installation, and dependable performance, it's a practical choice for maintaining a well-hydrated household.Pros:Broad Compatibility: This water valve is designed to be compatible with a wide range of refrigerator models from Whirlpool, Kitchenaid, and Kenmore. Its versatility ensures it's suitable for various kitchen setups.Ease of Installation: Installing the water valve is surprisingly straightforward, thanks to clear instructions and a user-friendly design. Most users with basic DIY skills can have it up and running without the need for professional help.Reliable Water Supply: The water valve consistently delivers a steady stream of water to the refrigerator's ice maker and water dispenser. Say goodbye to the inconvenience of running out of ice or waiting for water to fill your glass.Durable Build: Constructed with quality materials, this water valve promises durability and longevity. It's designed to withstand the demands of regular use, ensuring it stands the test of time.Cost-Effective Solution: Purchasing a new water valve is often more cost-effective than repairing an old one, especially when considering the convenience and peace of mind it brings.Cons:Occasional Noise: Like most water valves, there might be some occasional noise during the water-filling process. While generally not disruptive, some users might find it noticeable.Compatibility Verification: It's essential to verify compatibility with your specific refrigerator model before purchasing to avoid any compatibility issues.In conclusion, the IMV708 W10408179 4389177 Whirlpool Kitchenaid Kenmore Refrigerator Water Valve is a dependable and worthwhile upgrade for your refrigerator. Its compatibility, ease of installation, and consistent water supply make it a practical choice for keeping your household well-hydrated. While there might be some minor noise and compatibility verification considerations, the overall convenience and value it brings to your kitchen make this water valve a valuable investment for those seeking an efficient and hassle-free water solution for their refrigerator.