CARL Heavy Duty Rotary Paper Trimmer - 12238, Black/Silver, 18inch

Excellent accurate and strong! I use this cutter for cutting book board in my paper arts business for making both books and boxes. It is strong and accurate, two or three passes cuts through heavy bookboard and is much safer than using a utility knife. It is tricky for narrow or small pieces but there are good work arounds for that and it hasn’t proven to be much of a challenge. Great price, great cutter - and replacing blades and cutting mat is simple and economical, especially with the extra pieces stored within the tool itself. And both the blades and cutting mats last a good long time, especially being able to reverse and use the cutting mat four different ways. Highly recommended!!!

It's not generally difficult for me to make purchasing decisions, but a paper trimmer became a glaring exception. I needed it primarily to create labels for a product we make by hand, and no matter how hard I tried, I couldn't make the labels by hand that were up to the standard of the product. With their generous one-item coupons in mind, I checked the on-line catalogs of Joann Fabrics and Michael's Crafts, gave eBay the required cursory look just for price comparison, and concentrated on Amazon for reviews & Prime. I was prepared to drop $25 or $30. I bought this trimmer from Amazon, and that was the right decision for me. Here's why. I needed to see the exact place where the cut would be made. I print tiny registration marks in the labels to help me keep them lined up properly as I change the item specifics in each, and also to show me precisely where to cut. For whatever reason, my printers haven't always placed a print in the exact same place on a page from copy to copy. Once I cut that first line, then the rest can be cut in a stack. That brings me to a second point. The old guillotine cutter I bought years ago only manages a few pages of this 32# 100% cotton stock at once. It takes 2 passes of the cutter head, but with this trimmer, I can cut 20 pieces of that paper at once. The cuts are perfectly clean, straight, and square, and effortless to make. The locking mechanism is both brilliant, and the reason this trimmer works so well, cuts such straight lines. If the lever is raised, the mechanism is unlocked, and paper can be moved around under it. Once lowered, it holds the paper absolutely still while you cut. Many of the trimmers in the $25 to $30 range, and well into the hundreds, have some part of the contraption built into the base in such a way that the scale and/or grid is missing which makes cutting a narrow strip from a narrow strip impossible. You can do that with this trimmer, and the entire base is both intact and visible, though the portion directly under the locking mechanism is somewhat obscured by it. The only other trimmers I saw with metal bases like this were made by X-Acto, but they lacked a sophisticated locking device for the paper, and they only cut a few pages at one time. I didn't want plastic. The single con is the magnetic bar that's intended to be used for making multiple cuts of the same size, and the way it relates to the Slimer-green "light-gathering acrylic" guide. First, since my labels are about 1.275" wide and the guide is about 2" wide, the magnetic bar can't be brought close enough to use. Second, the magnet is quite strong, and that's good; it prevents accidental movement. It's also not so good in that the bar doe not have any mechanism to stay square, and must be manually squared each time it's moved. It takes a little effort because you need to fight with the magnet. I solved that by removing the magnet. I like well made tools, and I have some of my grandfather's who passed more than 30 years ago who also invested in good tools during his life. I've skipped meals to buy well crafted tools, and I scrimped to get this one. Quality tools last, and they pay back much more than they cost over their lifetime of service. There weren't any shortcuts taken in the fabrication of this tool so far as I can see. Seams & corners meet perfectly, and the craftsmanship in general is impeccable. I feel comfortable in recommending this trimmer to anyone who's serious about their work. I wish I had another star to give out every hundred reviews. If I did, this would get it.

I waited a few months to write a review. I have tried several cutters that I liked at first then found as I used them they lost favor with me. I wanted something to cut straight and leave clean lines. I was a bit worried that some of the reviews said it wouldn't do cut even after awhile. I found that true. HOWEVER, I had used it lots and realized with the volume of cutting, it might need a new blade. I replaced the blade and was good to go again. Since I work with paper in 4-5 hours per shift 4-6 days a week, I find that a blade lasts about 5 weeks. When the paper starts to get uneven cuts, I know it is time to change the blade. I am very happy with this purchase. It cuts thick, ultra thin and all the in-between thickness leaving that sharp clean cut I want. I have had a couple of trimmers equal in price that just seemed to wear out (one with a never replace blade, don't believe that tale, the one I had was tearing paper rather than cutting in two months). For the money, for the results, this has been my best results. The loading is sort of awkward at first (it has a lockdown step), but once I got used to it, it is great and I like it because once locked the paper does not move. Multi thick layers can slip (again especially if the blade is older), but it still cuts clean and with help the slip can be avoided. I would say it does not do sliver trim (like thread width) well, but I have never found a trimmer that does that well. Even with that I can say when I need to straighten a line cut it is the only one I have found that gives a cut that doesn't show a partial trim most of the time. I read some reviews on photo cutting, which isn't something I do. I have cut glossy photo paper and it did fine for me. In my experience cutting a lot of glitter paper seems to cause the blade to wear down faster (a lot to me is 75-100 cuts). I would buy this again, and have a stock of blades so I expect to use it for a long time. The cutting runner is usable 4 different ways, I turn that each time I change blades, just because I think it is good form to do so. Fresh blade, fresh runway seems like a good idea. I also like that the overall weight is not flimsy, yet not so heavy it takes everything to move it. It appears to be constructed well, I see no indication after months of use of any give or separation of parts anywhere.

I didn't realize how long the cutter is. It cutter measures 22" long by 13.5" wide. My portable collapsible table works for it. The base is very sturdy. I have arthritic fingers and I find it's easy to use. Very little pressure on my joints to slide the cutter bar across. I like that a drop down lever holds down the paper tight. The paper doesn't move. The magnet is a bonus. What it doesn't explain in the description. It doesn't cut 6 pieces of paper all at once. What you need to do to cut 6 pieces is; Secure desired amount of paper under the bar. The cutter will cut only the top sheet of paper. Remove that first paper and slide cutter bar across the second piece of paper, so on and so forth. It's very quick and each piece is cut perfectly.

Excellent massicot… malheureusement, il est plus petit en profondeur que son prédécesseur et m’empêche de couper des pages 30x30cm malgré que ce soit un 15 pouces. Il fait bien 15 pouces en longueur mais pas en profondeur vu qu’il s’arrête à 29,5 cm.

Muy práctica, corta diversos materiales, por ejemplo la tela como si se tratara de papel.

I invested in this to perfect the colouring book I'd made for my littlest sister 🐾 It certainly did what it said on the tin! It sliced through 10 sheets of thin card plus 2 sheets of 300gsm gloss card with no issue at all. It takes a few slices up and down but it's not physically difficult whatsoever and it made quick work of this book, plus a couple other books I'd made with the same thickness! I popped the book in as is, which is 4mm thick when closed. I'm pretty confident it could handle thicker stock, too! The magnetic ruler is pretty awesome and the whole guillotine didn't slide about on my smooth wood table. The way you clamp the blade ruler down before use holds your work strongly in place, but I'd recommend holding it down yourself too to ensure maximum precision. I've only used it 3 or 4 times thus far so I can't comment on durability over years, but I should hope for the price and based on how sturdy it seems right now that it's gonna provide years of smooth.like.butter 😂

Easy to use. Cuts well - even the thicker board. Well designed paper holder. Would have been good to have the 13" paper guide length included on the markings rather than stopping at 11-12" as the 13"x19" paper sizes are well used by photographers and art printers. But well done to the designers of this product and their quality control. Only used it for a few weeks but exceeds my expectations as a fine art photographer wishing to reduce 24" roll paper down to 13x19" and other sizes for printing. The other amazing thing you could do.... include a fold-out extended measuring guide on the left side to help measure longer paper pieces so we don't have to measure and mark separately before cutting longer sheets.