ALEKO® 18Ft (5.5 M) Galvanized Gate V Track Inverted V Track for Sliding Rolling Driveway Gate

Well made, used for sliding gate

Used it for directing the rolling gate on a straight line. The anchor that came with the package was a screw type. Took nearly three hours for the installation. Now the gate slides as expected I used the below v groove wheel on my 400 lb gate. No issues so far. There is no bumps ( The anchor is screw type so it doesn't affect the rolling gate wheel). Time will only tell how long the track/anchor lasts.https://www.amazon.com/gp/aw/d/B092F67ND4/ref=ox_sc_saved_image_7?smid=AK5XSDPEJGEO8&psc=1

These wheels are super high quality, roll smooth and worked perfectly for my 12’ rolling gate! I highly recommend them. I bought 3 roller wheels but ended up only needing two wheels due to the durability and quality of them. I’m very happy with my purchase! I just wish they sold all the parts in a kit so I didn’t have to try buying them in pieces, ala carte. Would have been much easier finding all the parts I needed to make it work.

These V-grooved pulleys are a real necessary item for good gate alignment and travel control. I don't fully recommend the track they sell for it due to its width is too narrow and the multiple lengths needed to make a long rail or the pulley to travel on is a pain.I have 3 power gates, all of them are using these pulleys ( 4 on each gate set at 4 feet apart each on 20 foot gates) and the track they sell for it is not good so I simply bought a 21 foot piece of 1/4 wall 1" angle iron and a 21 foot piece of 3" wide 1/8 flat metal and welded them up and now the track will handle big trucks, and has no sectional seems. The seems is where these pulleys catch.Otherwise, very strong and effective for the gates.

Worked well for installation of Ghost double gate system. I wasn't able to go underneath concrete driveway to hide cable from dual gates, the V space built-in the metal provided the perfect resolution. The ghost gate cable fit perfectly under it.

These are very nice, and with the rollers, they track true and smooth. The anchors are a little difficult to deal with and I had to grind off the top part of the bolts in order to get the rollers not to hit the tops of the bolts. They anchor ok though, and I'm sure the track is "not going anywhere".

Being aluminum this track is great for a coastal application. We used it along with ss v-groove wheels for a by-pass-opening fence gate. It works great and we needed the 18’ rather than the 12’ length of the galvanized version. We used a gutter for the cement track mold on which it is installed.

This track gets the job done. BUT, the vee-glide section is really too shallow. I used Wej-it <Wej-It Nail-It DN1412 Drive Anchor, Zamac Alloy, Zinc Plated Finish, Meets GSA FFS-325 Group V Type 2 Class 2 Specifications, 1/4" Diameter, 1-1/2" Length (Pack Of 100)> anchors, which are about the lowest head height you can get and the gate roller still bumps along as it contacts the anchor heads in its travel.The track comes with a boat load of standard wedge anchors that use nuts and washers but I can’t imagine using these. The gate rollers would be banging into these every 18” along the way.