HUANUO Triple Monitor Mount for 17 to 32 inch Screens, Gas Springs Adjustment Triple Monitor Stand with Swivel, Tilt, Rotation, Clamp & Grommet Kit (Black)

The media could not be loaded. Great quality for the price. I attached several pics and a video of it mounted to my electric sit/stand desk. I did order a thick metal plate designed for these mounts to sandwich on the desk being that my desktop is particle board I was concerned it would snap the desk where it clamps on at. I’m running 3 older 24" dell IPS monitors that are a bit heavier than most newer monitors and it handles them just fine. The gas powered arms were a little tricky to get adjusted just right and I still have one that needs some tweaks. When I adjust the screen menus with the screen buttons the monitor will slightly raise up on its own. Kinda annoying but I have not found a way to lock the arms in place once you have them setup the way you like. There is also only one screw underneath on the clamp and can be somewhat difficult to get tightened as the entire unit wants to turn. There are other units out there with dual screws that look like they would work better and prevent the headache of turning the entire setup when tightening. Not to mention they seem more secure. The cable management is great as I have two separate inputs going to each monitor and the power cable. All fit nicely in the sleeves and clips. Lastly there are no input plugs on this stand. Not really a con as you can clearly see that in the pictures and not docking any stars for it either. However there are other units out there that have built in USB ports, mic ports, etc that run around this same price point. All in for the price I would absolutely buy again and has been rock solid for a little over a month now with my sit/stand moving up and down multiple times a day with no wobble. Oh and the detachable vesa mounts that just clip into the arms are an amazing thing when installing your monitors. Just buy it. Hahaha

This is a game changer and highly recommended for any home office!!! I had an extra old monitor not in use, after viewing this product from Huanou I took a chance and happy I did. Not only does this product allow for versatility working, but the craftsmanship is exceptional. Sturdy, easy set up instructions, and most of all adjustable based on work needs. Be sure to READ the instructions as the two outer arms are not adjustable until monitors are installed.

To set the stage. I have a large built in desk and 3x 27" LG monitors. I love the monitors, but the bases take up a lot of room and do not swivel, so getting the screens positioned well means the bases take up a lot of desk space in price real estate areas.I mounted it using the "Grommet Mounting" method. I think I'd recommend this method even if the clamp was possible. The mount is pretty sturdy, I have no concerns there. Assembly wasn't too bad. The instructions could be better, mostly around the arm assembly as two arms are identical in the instructions, but are not clearly marked in the packaging. A little trial and error was required there, but thankfully it didn't require disassembly of half the unit to resolve.As for monitor setup. The middle monitor is fairly stationary, so ensure the mount is positioned where you want that middle monitor to sit. The arms are on gas springs, however, the cannot be locked in place once you get is positioned. While there is a tilt lock there is no swivel lock and there is a lot of play in the positional lock. I spent over an hour trying to get all 3 screens flat/level and never did achieve 95%. Once you get the gas spring tension dialed in the movement there is pretty smooth/easy. Again, there is some play in the joints, so you need to fiddle with it to get the right height, but unlike the tilt and swivel it's not too difficult to get it where you want it.The side screens are a bit "wobbly". I'm one of those guys who's always tapping his leg(s), and the side screens will jiggle a bit and there is nothing I can do about it b/c of the gas springs I can't tighten or lock them in place. Overall a minor issue, but an issue nontheless.The cord guide/cages that attach to the gas spring arms could be deeper (like the ones on the fixed arms). I have fairly thick cables and I had to pry up wedge the cable in place, and they aren't moving, so fine adjustment is very difficult.Overall, I am quite happy with the product and believe it is a great value.

I've been using the HUANUO Triple Monitor Mount for a while now, and it's been a fantastic addition to my workspace. Here’s my experience with it:The first thing I noticed is how sturdy and well-built this mount is. Made from aerospace-grade aluminum, it feels solid and secure, even with three monitors attached. Each arm can hold monitors up to 32 inches and 17.6 lbs, which is perfect for my setup. The gas spring adjustment is smooth and allows for easy height, tilt, and swivel adjustments, making it simple to find the perfect viewing angle.One of the best features is the space-saving design. By elevating my monitors off the desk, it has freed up a lot of valuable workspace, making my desk look much more organized and less cluttered. The ability to rotate the monitors to portrait or landscape mode is also a big plus, especially for multitasking and coding.The installation process was straightforward, with clear instructions and all necessary hardware included. I opted for the C-clamp mount, which fits securely on my desk without any wobbling. There’s also a grommet mount option if you prefer that.On the downside, the initial setup took a bit of time, especially when adjusting the gas spring tension to balance the monitors correctly. It’s important to get this right to ensure the monitors stay in place. Additionally, this mount is best suited for wooden desks, as it might not be as stable on glass or particle board surfaces.Overall, the HUANUO Triple Monitor Mount has significantly improved my workspace ergonomics and efficiency. It’s sturdy, flexible, and offers great value for anyone looking to enhance their multi-monitor setup.