Digital Door Lock M210 Mechanical Keyless Deadbolt, White

ORDER AND DELIVERYI received and installed the M210 Mechanical Keyless Entry Deadbolt yesterday (3 working days from order day). It was fulfilled by AAA Industrial Supply, and shipped via USPS. I ordered it late on Friday, it was fulfilled on Sunday, and Shipped on Monday since USPS doesn't work Sundays. Amazon's ETA was 10 days from shipping, but once I tracked it on the official USPS site it said 3 days, I was happy since my current deadbolt wasn't working. When the shipping box arrived it was in perfect condition as if it hadn't even been through transportation, and the internal retail box was perfect as well.INSTALLATIONThis Keyless Deadbolt was super easy to install, since I already had the deadbolt hole, it only required drilling one and a half (I'll explain the half) 5/16 holes from a template supplied that I matched to my deadbolt hole and taped to door. The first hole is drilled above deadbolt hole, and half at bottom edge of deadbolt hole, I had to use my drill to carve straight down since it's not that easy to drill half a hole on the edge of an existing hole. My door hinges are on the left so I had to unscrew and swap a pin to change the direction the lock pulls from, this took less than a minute. I put the hex screw extensions into lock and put them through newly drilled holes. I screwed the stability pin to back piece, and put locking pin through deadbolt and screwed the back on. I didn't change the combo yet because I wanted to see how long it'd take me to change the combo, and if it was worth changing frequently. The whole installation process took me about 10 to 15 minutes from putting the lock together to taking out the old deadbolt and installing this one.CHANGING COMBOI took it apart to change the combo, with my electric DeWalt driver, it took less than 30 seconds to take off. After deciding on a new combo it took about a minute or two to unscrew the back panel, hold the clear knob, swap out the tumbler pins, and screw the back panel back on.NOTE ABOUT COMBOThere are tumblers with red on top (coded), and others with blue on top (uncoded). The red coded tumblers make up the combo, the blue are non-combo pins (fillers). By default there are 4 red coded tumblers in the lock, but it comes with 1 extra red, and 2 extra blues, so you can have up to a 5 key combo which increases the number of guesses if someone started from the first option of 2 keys, or even the default 4 keys. So without purchasing new tumblers you can do a 2, 3, 4, or 5 key combo, so if someone didn't know how many keys you set they'd have to try all possiblities with 2 to 5 keys regardless of order. Like other reviewers mentioned, you don't have to have the exact sequence to get the combo, you just have to press all the keys in the combo (in any order) and turn thumb knob to open it. Still the likelihood of someone pressing all the keys would be pretty unlikely, not to mention I have a key on the door lever, so I have 2 levels of protection for those not motivated to get in. Below I put the possible combinations where order doesn't matter, so as you can see there's quite a few.You can also order more tumblers, but it seems like a waste after 6. Another reviewer/commenter mentioned you could drop the total guesses if you turned the thumb knob after each key press, so if you had a 5 key combo and they pressed all 5 key combos turning the thumb knob after each key press they only have 792 possibilities. Now I think this would require one motivated person, they'd probably be better served making noise and kicking in the door as it seems like a major hassle and they'd be seen as they went through each combo. It wouldn't be worth the risk since if they want my expensive tools they have to then break into my 5 foot gun safe, lol.# Poss Combos2 = 663 = 2204 = 4955 = 792 (total if turn knob after each press)Total = 15736 = 924 (total if turn knob after each press)Total = 2497 (if you ordered extra)Source: [...]FINAL THOUGHTSOverall I am very pleased with how easy the M210 is to install and used. I am also happy about not having a keyhole in it after seeing how easy it is to pick a key lock, and the electronic deadbolts all seem to have a backup keyhole which makes total sense because how else would you get it if it had no power (more for convenience)? These are the reasons I searched out and found the M210, and I will update my experience after I've used it for a while.

I had a normal kwickset deadbolt on my door with the large hole. See the pictures.The deadbolt part fit perfectly and so did the door jam plate.You need a 9/16 drill bit and a phillips screw driver to install in the existing kwickset style door.The template is worthless for using a door that is already cut for a kwickset deadbolt, you can just throw it away.1st I had to use the side of the drill bit to carve a half hole on the bottom of the circle already cut into the door.2nd install the bottom "screw extension" only and the "pin".3rd put the rubber gasket on the front and hold the front lock on the door.4th install the lock bar and back plate. Install the bottom screw only.5th Shut the door and test the lock to make sure it locks properly and leave it locked to help hold the lock straight.6th Now make sure the back (inside house side) is straight and even on the door.7th Mark the top screw hole with a pen, marker, or just a nail.8 Remove the lock pieces.9 Now using the mark you made for the top screw hole, drill the hole through the door with the 9/16 drill bit.10 Before I installed the door knob, I opened the back and set the code.11 I stuffed some wall insulation in the original large hole around the deadbolt slider and then put a bead of caulk around the large hole and the small one I drilled to help seal them against the rubber gasket.12 I held gasket and front (outside part) of the lock on the outside of the door pressing it into the caulk.13 I put the back (inside part) and gasket on the other side and installed the bottom screw.14 I installed the top screw.15 Tightened both screws all the way and the job is done. Then test again.I tested it a few times and it works great.This deadbolt will stay unlocked until you spin the knob to lock it just like a normal deadlbolt which is nice. I did not want something that auto locked.I highly recommend. Now I only had it in for an hour so I cant say how durable it is, but it feels durable. You can see what I did in the attached pictures. I took off one star due to it not having a template for an existing 'kwickset' style door and only having a template that only works with an uncut door. The only way to find the hole location to drill the top hole is by installing the lock with the bottom screw only an marking the hole for the top screw.

Because I'm Sabbath observant, I required a non-electronic digital lock. This appeared to be exactly what I needed. And, in fact, it works perfectly. Its only design restriciton is that, like a conventional realtor's lockbox, numbers can be entered in any order and no numbers can be repeated (e.g., 1776). But, no complaint there. My problem is that LocKey USA has several versions of this lock and the instructions try to cover them all - with considerable confusion. Moreover, my kit claimed to have come with a "Bonus Mounting Plate", whatever that is. All I can tell you is that it would have been impossible to assemble the lock without any of the parts in the kit, except for 2 large neoprene pads - I never did figure out what those were for. I doubt that they were the "Bonus Mounting Plate". Another annoyance was that the last 2 screws I needed to assemble the inside toggle to the lock should have been two 1/2" round heads. Instead, all that remained were two 3/4" flat heads. The heads were too large to fit into the holes on the toggle plate so I had to grind them smaller, and I had to shorten them before the toggle plate would come flush to the door. No problem for me - I'm a machinist. but these issues would have been frustrating for many customers. The last word... the lock works great and I'm still happy with the purchase.