Hordion 60mm/2 3/8" Hole Saw Bi-Metal Saw Drilling Tool with Twist Drill Bit & L Hex Wrench for Cornhole Boards Wood Plasterboard Plywood Plastic

Works very well for materials stated, comes with 2 extra drill bits as well. Works amazingly and is super quick to put together and into the drill, have a pair of players handy, you can get it started screwing in at first while attaching the bit to the blade but after a couple turns you can't turn it by hand anymore, used plyers holding the bit end and just twisted the circular saw part and it went on very easily and stayed nice and tight. Drills through plastics very easily you almost have to slow yourself down. For the price this is a great product and is very sharp out of the box, paint stays on well also.

I needed a 6-1/4” hole for recessed ceiling lights in suspended ceiling tile. This saw was 6.3” and the hole was just the right size. I cut a guide hole in a piece of MDF first. The location of the hole was marked on the tile face and the guide hole board centered on the tile. I clamped the template and tile to a backer board and bench. The resulting holes were clean and the right size. The ceiling tiles are compressed paper fiber and easily damaged. I tried several methods to cut the holes and they all resulted in tear out that wouldn’t be covered by the light ring. I’m happy.

Cheap price - cheap tool but does a decent job. I needed it to drill a hole in a shower wall for the faucet. Did the job, but Use the better style auger, the one with the lock pins. It’s also 3 9/16 not 3 1/2. It’ll get tossed in ky tool box with the other hole saws, till I need it.

Needed to cut a 3 1/2” hole for a Mr Cool mini split line set. Not only was it up to the job, but the saw fit my Lenox (Lowe’s) mandrel exactly! And I think it is ready for several more holes if need be.

Product is as described and accurate to size.

Worked great for installing my 3” lights in the ceiling.

Used it for a new wafer lights in our kitchen. Works perfectly.

Maybe this is ok to use if you are positioned over your project, but DO NOT USE IT ON THINGS LIKE CEILINGS. Like other reviews state, there is no locking mechanism to keep the saw in place and its only threaded in. Which means when you are drilling and its spinning fast and suddenly stop, the saw continues to spin and thus, unthread itself and come flying off. There is no reason a whole saw this big only threads in place.

Perce dans plaque fibre

Me decepcionó la broca. Ya tuve de éste tipo, pero de otras marcas y la verdad es que me fue muy distinto. La broca no es estable, tiende a saltar, tiende a moverse en momentos de presión y eso vuelve la cosa incómoda. Además, el desempeño es muy bajo, se tarda bastante a diferencia de otras brocas de éste tipo. Acabé rayando la superficie que trabajé (era una prueba, ya sé que no usaré esa broca a menos de ser una superficie que no requiere un buen acabado). Aconsejo mejor una broca Utoolmart de 100mm que pueden encontrar en Amazon México (y quizás USA)

Je m'en suis servi pour percer dans une tuile de carton et les dent de coupe sont grosse, a part cela ok.

It Works fine!

Price is a little high for the quality. I have not used it yet but I suppose it’ll work fairly well people say you must fasten it somehow because it spins loose from the bit and can become dangerous. I will just spot target with my welder