ErGear Single Monitor Stand for 13"-32" Screens, Freestanding Monitor Arm with Tempered Glass Base, VESA Desk Mount with Height Adjustable Swivel, Tilt, Rotation, VESA 75x75 100x100 Gaming

I brought this to use with my LG27GL850 monitor, the LG monitors come with a ugly base that is 19 inches wide taking up far too much desk space. I carefully went through various products, which most had bad reports of not been able to hold the panels properly due to been too weakly built, and this one took my fancy because it doesnt hold onto edge of desk, has its own base instead, and the reviews were much more solid. I agree with the reviews, this very sturdy, I have no fear of it suddenly falling over or losing its tilt/height adjustment. Installation is documented very well and not overly difficult, the part you may have concern with is fitting onto the back of the display as I did it on my own I had it face down in the foam that the monitor was shipped in whilst putting on the mount. I didnt use that little plastic thing with the stars on, thats the only part of this product that looked cheap, it seems out of the place, as without it, the base looks clean. The swivel works without anything needing adjusting, so easy to push screen left and right, height and tilt do require you to loosen with alan key, make the adjustment, then retighten again, which is a bit awkward, and needs to be really tight. However those 2 adjustments I wont be making very often if at all now, the swivel is the one that I might use now and again, and thats easy, most monitors now days dont support swivel at all, so this is a vast improvement. The space I saved? LG stock base is a massive 19 inches wide, this one is 9 inches.

Well made and holds my 27" gaming monitor perfectly. Free standing too so easy to move around.

I eventually bought this stand after many frustrations with a "universal" stand that supported screens up to 52 inches. I expect it did, but it wasn't very suitable for my 32 inch TV - mostly because its larger components covered up the TV's connectors! It was also very complicated (many parts) and I didn't like the TV was left hanging off a rail. Anyway... I bought this ErGear Single Monitor Stand for my 32 inch TV, despite the name. All you really need is VESA standard mounting sockets (screw holes) on the back of your screen with 75mm or 100mm spacing. INSTALLING Not much to this. The instruction sheet is OK: 1: Stick the self-adhesive rubber feet to the underside of the base 2: Stick the self-adhesive circle of felt to the underside of the upright pole 3: Screw the base to the upright 4: Loose the mounting bracket so it will slide onto the pole, position it at the right height and tighten the screws 5: Screw the VESA mounting plate to the back of your screen 6: Attach the TV to the stand - by dropping the mounting plate into the V-shaped docking area on the mounting bracket 7: Attach the knurled locking screw to hold the mounting plate to the mounting bracket 8: Make any final adjustments and tighten the screws ASSEMBLY HINTS To fit the base to the upright, you need to pass 3 short Allen screws through a washer, the base, a plastic spacer, and into the threaded holes in the upright. It's hard to keep all those components lined up! My solution was to turn the base upside down, put the screw + washer into each hole, then hold it in place with sticky tape. Now you can turn the base the right way up, add the spacers, and sit the upright with the threaded holes over the screws, and (finally) start screwing it together. It would be a lot easier if the manufacturer used longer screws and nuts. Ah well. BEST BITS + Simple, robust design + Just a few parts to assemble - quite quick and intuitive + Good range of adjustments available (height, horizontal angle, vertical angle) WORST BITS - The self-adhesive feet weren't. I had to use glue - Attaching the base to the upright was really awkward (see ASSEMBLY HINTS above) - The adjustments are all friction-based. If your screen is heavy these need to be quite tight - The stand is very adjustable, but you won't want to adjust it often - A bit wobbly, my 32 inch TV is probably a bit too heavy CONCLUSION A good stand, but assembly is a bit awkward, the adhesives had dried out, and adjustments could be easier. Four stars.

I’ve used this stand with the Toshiba 24WK3C63DB 24-inch, HD Ready, Freeview Play, Smart TV, Alexa Built-in (2021 Model) The stand is absolutely fantastic and was very easy to build myself and 9yr old daughter did it together. Very good quality, heavy and solid and easily attached the tv. A good price very pleased. Does have good swivel capability and it’s versatile as well.

Brilliant stand. Easy to assemble and very sturdy. Have mounted a 24 inch monitor in portrait as a second screen and is easy to adjust angles to get it just right.

The sticky pads for the feet came with no backing when they were supposed too, this means they'd all fell out and lost 90% of their stickiness and I had to find some sticky tape to make it right. There was a big 'This way up' sticker plastered right on the visible tempered glass which leaves a horrid mark that's hard to remove. The screws were machined slightly too long causing a rattle in the back plate. Luckily I had some spare from the original stand attachment thag fit to make it flush. Once all this was sorted its a pretty nice stand and serves its purpose. Not impressed with the amount of fixes requires on my case for the price point to be honest.

Werkt goed

Ein hervorragender Monitorständer! Passt einwandfrei an meinen 32 Zoll Monitor. Alle Teile zum Anbau liegen bei und sind sehr gut gekennzeichnet. Dadurch gestaltet sich das Anbringen am Monitor sehr einfach und geht relativ schnell. Der Monitor braucht aber auf der Rückseite für die Befestigung des Ständers eine "VESA Befestigungsmöglichkeit" mit den entsprechenden Schraubbefestigungen (hat aber heute fast jeder handelsübliche Monitor bereits vorbereitet). Der Ständer ist stabil, sieht optisch sehr wertig aus und lässt sich einwandfrei drehen und in der Höhe verstellen. Das Produkt kann ich absolut weiterempfehlen !

Ce pied peut être utilisé pour les écrans 15,6 pouces sans problème mais il y aura du jeu entre le support et l’écran. J’ai coupé en deux les cales en plastique qui doivent être utilisées pour les écrans incurvés pour pouvoir stabiliser l’écran au support. Sinon très bon support écran.

Allora prodotto preso per sostituire lo stand originale del mio monitor hp troppo voluminoso. Prodotto arrivato nei tempi stabiliti, buonissima fattura e stabilita', facile da montare e con una buonissima dotazione di serie per il montaggio con diversi tipi di monitor. Molto robusto. Base in vetro dotata di piedini e staffa di fissaggio per il monitor, dotata di spugna e relative rondelle plastiche per il montaggio. Regolazione del monitor in altezza angolazione verticale ed orizzontale, comodi gli ancoraggi dei cavi. Unica pecca, legata sopratutto alla mia tipologia di utilizzo e' lo stand che collega il monitor alla barra del supporto. questo integra i vari giunti ed il monitor di fatto arriva ad essere a oltre 10 cm dal tubo di fissaggio, non e' un problema vincolante ovviamente ma potrebbe rivelarsi un dettaglio non trascurabile in alcune situazioni in cui lo spazio non e' abbondante. Nel complesso comunque sono molto soddisfatto

The ErGear Single Monitor Stand looked promising at first, but unfortunately, the quality isn’t up to standard. The structure feels fragile and not resistant enough to securely hold heavier monitors. During setup, it felt unstable and even nearly caused my monitor to fall, which was very worrying. While the design with the tempered glass base looks elegant and the adjustability options are nice in theory, the stand simply doesn’t provide the sturdy support you’d expect. It definitely needs improvements in build quality and stability before it can be safely recommended for everyday use.