INJORA RC Motor 550 Brushed Waterproof Motor for 1:10 RC Crawler Axial SCX10 AXI03007 JL 90046 TRX4 TRX6 RC Car Boat (21T)

This INJORA 550 brushed waterproof motor has been great. It was easy to install on my 1:10 crawler and fit perfectly with no issues. The waterproofing gives confidence for trail runs in wet or muddy conditions, and the 21T provides smooth, reliable power for crawling and general driving. Performance feels solid and consistent, and overall it’s a quality motor for the price.

My son has a Traxxas Slash 4x4 with the Titan 12T brushed motor and 4” Pro Line monster truck tires. He also had to run a 9 tooth pinion (13 tooth is stock) to keep the Traxxas Titan motor from overheating. The Titan motor was getting slower and he could only get about 13 MPH and 22k RPM from the Titan motor according to the TQi app. He was pretty disappointed so I got him this Injora 12T motor hoping it would breath some new life into his Slash before he goes brushless on his birthday, and it worked. He gained 5 MPH right away with the same 9-tooth pinion and it seemed more peppy too. He was also getting about 26k RPM now vs 22k. The new motor seemed to have better torque and stayed cool so we put the stock 13 tooth pinion back in even though it still had the larger tires. That bumped him up to 23 MPH and it still had very good low end torque, and yes I adjusted the app for the 11 tooth pinion so the MPH reading was correct. After a half hour of bashing in 70 degree weather the motor didn't even break 100 degrees which is very good. Both motors were/are running the same aftermarket fan, but the Titan motor still got pretty hot. In the short term this is a pretty good upgrade over a tired Traxxas Titan motor. The Injora motor has very good torque, runs cool, and seems to match the performance of a new stock Titan motor. We may try going up in pinion teeth if this new Injora motor stays cool on hotter days. That would make this Injora motor a really good bargain. My son is pretty happy now. Update: my son is real happy with this. He did a long session of bashing on a hot day and the motor never got over 117 degrees. The previous TItan would have got hotter with a smaller pinion. Update #2: This motor is still going strong. With the 11 tooth pinion and monster truck tires the motor stays much cooler than the Titan motor ever did. He did a bashing session yesterday in 90+ degree heat and the motor stayed mostly under 110-degrees (with cooling fan) and ran very strong. His 4x4 slash with monster truck tires slash is nearly as fast as my 2wd Rustler with 86 tooth spur gear (90-tooth is stock). We’re going to gear this up to a 13 tooth pinion because obviously it has headroom to spare where the Titan did not. I think this motor also sounds smoother than the Titan motor did.

Great for fixing. Cane fast too

This is a great motor for trailing and crawling for fun! With just the right balance of speed and torque for my TRX6 G63, I never worry about overheating or being unpowered. 🤙🏽

Gmade Buffalo GS02F. Works great with the factory 2 speed. Plenty of torque and speed. Almost too much speed in 2nd gear.

Nice motors. Looks a lot like the factory motor for our Traxxas trucks.

Works perfect for my rig. Has the speed I want and the low end to slowly approach the stuff I'll be running over. Quiet. Ran multiple batteries and my motor didn't get hot to the touch. Just got warm.

I have a arma senton and have gone through 3 motors on a 2cel. Each broke with in a hour of use

Shaft is too long for the FTX Outlaw RC car

I burnt out my original Dynamite motor in my ECX Torment 2WD. I searched for quite a while to find a replacement and I'm glad I found this one. This motor was a direct fit replacement, took me less than 5 minutes to change. Original motor was a 15T so I didnt want to go any higher because I wanted to maintain the speed I was used to. So, after a quick warm up and a 30 minute full throttle run in a parking lot I'm happy to say that the motor didn't burn out. I'm very pleased with the speed. (I'll try to post a video I made) Sounds like a jet:) I've read that someone said the motor was loud.. It's no louder than most Brushed motors. Definitely worth the buy and if this one does burn out I will be buying the same one again.

What I asked for

Excellent quality

Lo compre para un wltoys 12423 y funciona fenomenal,encaja perfectamente en el mismo soporte,solo hay que cortar unos milímetros el eje y perfecto..!!