Storage Logic Queen/Full/Full-XL Foam Mattress Vacuum Bag for Moving, Vacuum Seal Mattress Bag with Straps

This bag works quite well, as long as you have the right vacuum for it! I have purchased and used this exact product twice so far, because I end up puncturing it every time I use it (more on this later). The first time I used it, I tried using my regular household vacuum cleaner (Miele canister vac). It worked a little bit, but the vacuum quickly overheated and shut off. Most household vacuums aren't meant to operate at maximum suction without a lot of air flowing through them (because they rely on the incoming air to cool the motor). The second time I used this bag, I used a large shop-vac (Rigid brand vacuum). This worked a LOT better and didn't suffer any overheating issues. If you want an even better vacuum, I have some more info later on. For most people, using a standard shop-vac will do the job nicely. Once you have pulled the vacuum, fold the mattress over and strap it up. Having a second person to help here is very useful -- one person sitting on the mattress to keep it folded while another person straps it worked very well. I used the included straps to hold it in half, then used some ratcheting straps to tighten it up even further. Note that if you use ratchet straps, put a piece of cardboard or something like that between the metal ratchet body and the plastic bag to keep from puncturing the plastic. The attached image is of a Purple 3 mattress under full compression. I think the compression is just as good as the factory does, but I didn't have enough leverage to actually "roll" up the mattress and could only fold it in half. Its still plenty small enough to fit in the back of a normal station wagon/hatch/SUV. Once your mattress is vacuumed and folded, you really should add some extra protection. You can wrap the mattress in mover's plastic wrap, or find some other heavy duty plastic/tarp to wrap this in. The vacuum bag punctures VERY easily. This happened BOTH times I tried moving with this. It's not the end of the world, as long as your straps are tight -- the straps will keep the mattress MOSTLY contained even if the vacuum is lost, but it will be a LOT more difficult to move around without the vacuum intact. Note that I punctured this even though I was trying to be very careful. I was moving my mattress with a helper down a short walkway between my door and the car. The mattress was very heavy, so we stopped once to put the mattress down and take a quick break. The bag touched a grain of sand on my walkway (yes, just a grain of sand), and this caused a minute puncture. It was enough that I could hear it leaking, but I couldn't stop the leak with duct tape or anything like that because of all the creases in the plastic. Within 2 hrs, the mattress bag vacuum was completely lost. So if you want the ultimate vacuum, I had good results using a four-stage diaphragm pump with a shop-vac as a roughing vacuum. Most people won't have access to this equipment, and probably won't need this level of vacuum to be honest. My shop-vac took the vacuum down to about 650 torr. I was able to attach a diaphragm pump using an NW25 fitting. If you remove and use just the O ring from an NW25 centering ring, it will fit over the inlet port nicely and creates a good seal once a vacuum is established (see photo for more info). I took it down to 40 torr and said "good enough" there. The majority of the compression had already happened with the shop-vac -- the difference between 650 and 40 torr was noticeable, but not enormous.

I ordered the Twin/Twin XL size for a twin mattress. Other reviews mention that the vacuum bag is very thin. I disagree. It is not incredibly thick plastic, but it also did not feel thinner than I'd expect. That said, for anything you're looking to vacuum seal you need to be very careful of tears and holes. I did not find any defects out of the box. The product comes with two instruction sheets. One is for how to use the product. The other for troubleshooting and resolving issues. The directions were straightforward and clear. And where it recommended running the sealing clips across the zipper four times, I made sure to follow the recommendation. I have a small 4hp shop vacuum I used for sealing. My wife and I helped press (and later sit) on the mattress to help speed compression, but even without that extra help I still saw the package shrinking. The included directions state that the process should take fifteen minutes. This was accurate for my case. The directions also state that if the shrinking is taking longer to stop at about that time to rest the vacuum so the motor does not overheat. The mattress shrunk very well, ans my wife and I rolled it up with some effort. We used the included straps to hold it together. While not shown in my picture, the directions suggest that for travel or very rough storage to wrap it in packaging tape. I'm very satisfied with how things are looking immediately after wrapping. I will need to wait and see if it keeps, and will update this review if there are any issues. The cautious part of me feels I should add some additional support to prevent expansion, but we'll see. But directions were easy to follow and it worked as described. I'm rating this five stars but will update if there are any issues.

Worked for a california king lucid hybrid mattress with some springs inside. Compressed from 10in to 2.5_3 inches. Was able to roll up and strap into a cylinder for easier storage. Vacuum port could be sturdier wants to suck up the plastic into the port. Otherwise perfect product. Took about 5 mins to vacuum seal. 10 mins to put bag on.

I had a mattress topper that I bought but it did not work out for a lot of reasons. They told me that the only way I could return it was if I pack it up in a box and the mattress topper box was very small. I saw this on YouTube when a couple was returning their mattress. I tried everything else and nothing worked to shrink it. Yeah sadly I did have to buy this but at the same time I would rather spend money on this and have my mattress topper returned then to be stuck with a $100 mattress topper. There was no way I was gonna throw it Trash Because that would be a hundred dollars down the drain! So I bought this as a last ditch effort to return it. When I got it it was the real deal and also it came with straps so I could tighten it after it shrunk. I bought a UPS box and when I used this to shrink my mattress topper I used my vacuum hose and it shrunk wasn't perfect but it shrunk to where I can fit it inside the Box. But I would say that you might need help as far as rolling it up together if you don't have a lot of strength but nonetheless it worked. It felt like a ziplock bag and it was very easy and of course the straps worked great! I have since now wrapped it inside the UPS box and it has been returned. I couldn't have done this without this thing and I still have to handle strings left because my mattress topper only needed to. I'm not sure how this would work for a mattress over eight inches but if you have something less than 8 inches or even a mattress topper like me, I recommend you give this a try! I will be buying again if I need to! Also if you can I would recommend you have another person help you at least but if you don't then I would really be careful and take my time to make sure everything is correct.

Bought a bigger size since my mattress is 160 cm wide but thin. Could probably have gone with the smaller size as well. Worked really well so far. Hope I won't experience any air leaks.

Bon produit, mais le vendeur devrait indiquer les dimensions maximum.

Funcionó perfecto para mi colchón Luuna tamaño matrimonial (MX), la bolsa es más grande pero aún así sirvió. Pude transportar así el colchón en mi coche sin tener que pagar mudanza. Recomendado!

Was moving house and needed to move my mattress. The was so easy to use, I did it all on my own and only needed help carrying it up stairs. As a single mum I had to use my mum yo watch my baby while I was packing and then she helped with carrying up stairs. I wasn't able to roll it into a sausage, was more like a very fat folded wrap. It was extremely easy to use. Be warned if you are doing this alone it is like a mini work out :)

Utilizzato per un trasloco, facile da chiudere e compatibile con tutte le aspirapolveri