ISDT PD60S XT60 Connector 60W 6A Battery Balance Charger Type-C Input for 1-4S Lipo Battery，Life, Lilon, LiHv/Pb/NiMH Battery - XT60

This is a perfect item if you need a pack charged on the spot fast-ish. It balances and charges from a USB-C Input. I have found out, at least a solid 5V power source or the charger will reset itself. I have a power converter for my car that has a 5V Outlet plug that I can plug into, when my car is started, and I haven't had any issues with overheating, overcharging or unbalanced charges. It takes around 12 to 15 min to charge a 1500 mAh, 4SPL Li-Po battery. I don't suggest using a parallel charging board, unless you are using, maybe, your wall outlet at home.

This little thing is no joke. It charges pretty much any size of any battery chemistry and does so (selectable) up to the max rate your battery can handle. I bought a cheap off-brand 60w usbC charger to power this and it works exactly as described, can charge a 3000mah 2s LIPO in 30 minutes. The fact that this features balance charging and overcharge/overheat protection at any charge rate makes it better than any other charger I’ve used, some costing 10x as much.

I tried this with a bunch of different power bricks i had and even on the lowest setting it couldn't charge a 4S battery, it would just error, I did find a old 12 volt 3 amp power supply i had in a box of junk and an old usb c cable that i hacked and wired together to make this usable, but i figure a usb c will probably just burn out eventually with that kinda power, just stupid!!! this really should have had a xt30, xt60, or a barrel connection as an input, i really think this is a stupid design as is and a M4AC or m4 pocket charger is far superior to this and worth the extra money a hundred fold!!!

It took me a while to find a wall adapter that could supply enough power to get this charging at 1 amp; it works in cars just fine, which I guess is it's intended use case. Besides that, it works very well and I am very happy with it for the price. The only thing I dislike is the lack of ability to bring lipos to storage voltage, which I think it could do easily with a software update as it already has a large heatsink that could be used as load. Either way, I would buy again for the price.

Works perfectly and seems to be well built, I can’t beat the price and I will be ordering another one soon

Its small, no frills, Seems durable, no Bluetooth or other extras. I purchased this with the intent of charging a large lipo battery to power a CPAP. Upon the initial test, to charge the battery for the first time I connected the components together, (on a partly cloudy day) and in the sun it performed great. But one single small cloud disables the charger. When the sun returns it sits and waits for the button to be pushed to start the charging process again. It does not forget the amp setting or battery type but can not restart charging on its own. Virtually useless unless in full sun.

This thing is a little horse. It's tiny and lightweight and SUPER simple to use. No manual needed. It does 6 amps on my 3S Lipos and while it gets warm, I'd not call it hot. At 2 or 3 amps its a touch cooler but I'm not worried in any case. So small and inexpensive... comes with a long (4 ft??) USB C charging cable to plug into any wall wart USB power supply. But.... if you are planning on using just a 2.4A or 3.0A USB, even though you select 6 amps.... you WILL NOT GET IT (on 2S or higher at least). It will charge but it takes about 3 to 4 hours to charge my 3S 5000mah Lipos. After buying this (See link) awesome 20V 87W USB power supply.... all is well again and it charges at 6 amps on 3S all day. Was $20 but on sale for about $13. https://www.amazon.com/Replacement-Charger-Adapter-Compatible-MacBook/dp/B09Q66B3ND/ref=sr_1_9?crid=HWLYNLVWLN9B&keywords=20v+87w+usb+c+power&qid=1649311287&sprefix=20v+87w+usb%2Caps%2C1226&sr=8-9

I am amazed at what you can get for the money, it really can meet the needs of almost anyone and it comes very close to my iCharger for its accuracy at balancing the cells and getting them as close to 4.20V as possible. This would be perfect if it could do 6s but I understand why it can’t. I recommend this to anyone who uses 4s and under batteries. It is so nice not having to lug around a big power supply and listen to a fan whenever I charge

Es la primera ves que lo ocupo, lo conecte a una power bank de 2a de salida de 30,000 mah. Se ve de buena calidad los plásticos. Fácil de ocupar. Y al parecer trabaja de maravilla.

Muito bom esse carregador. Carrega até baterias 4S. Bom usar ele com uma fonte de carregamento rápido.