SOLIGT Stackable Stainless Steel Seed Sprouting Kit, 2-Tier Mesh Sprouting Trays, 1 Base and 1 Cover Lid

I love these sprouting trays! I've never had much luck with the mason jar method but these trays make it so easy. I only use 1 tray so I can speak to using multiple at one time. I'm not sure why it shows these as a "frequently returned item" because they work great, are of great quality, and they fit together perfectly. I can't see why there would be a problem. I highly recommend them for getting in your daily broccoli sprouts!

Just buy it and start sprouting. you will not regret the purchase. very sturdy stainless steel and great size. Best sprouting kit I have ever purchased.

Growing Radish Sprouts in SOLIGT trays (takes about an hour over 4-5 days, including harvesting and cleanup) This is my third edition of my procedure, which has continued to evolve. The main difference between this and v2.0 is that I've modified my previous version to use both trays, in order to grow a larger batch. After extensive experimenting with Bell jars, I still use them to grow alfalfa sprouts, which are easy and foolproof, but have given up trying to grow broccoli sprouts, which are harder to grow well than radish, whether in jars or trays, and because I can buy them locally anyway in adequate condition. The radish sprouts I grow with the following procedure still take about an hour of my time, including harvesting and cleanup, but I find the excellent results worth the time. I've used Nature Jim seeds for all these experiments, and whereas only about 60% of the broccoli seeds germinate for me in jars, compared with about 85% of the alfalfa seeds, the following procedure for radish seeds in trays yields about 95% sprouts. To make this work optimally you will need a sharp paring knife, 2 Bell jars with screen tops, plenty of paper towels, and a pull out kitchen sink sprayer for watering and for cleaning up the tray screens. Day 0 (prepare the seeds in the trays): (A) soak 1.5 tablespoons of radish sprout seeds in 4" of water in each of two bell jars with screen tops, from noon to midnight; (B) then, for each jar, (1) leaving the screened top of the Bell jar on, dump the soak water through the screen top, fill, shake, and dump water again; (2) repeat step B1, then remove the screen top of the Bell jar, and fill the jar halfway with water; (2) lay one of the two circular screened tray layers onto the circular tray bottom catch basin; (3) dump the half filled jar quickly into middle of the circular screen, creating a small mound of soaked seeds; (4) using the bottom of a spoon, carefully spread the mound out evenly into the surrounding screen, ensuring that each seed lies flat, and leaving 1/4" of uncovered screen around the periphery for drainage. (C) stack the two trays of spread out seeds onto each other and the catch all bottom, put on the tray top, and store in a stable room temperature area for the next three days (I use part of a closet shelf lined with paper towels). Days 1-3 (water the seeds, keeping them in the dark) (D) Water each of the tray layers thoroughly, and drain, on an approximate every 8 hour schedule (say 8am, 4pm, and midnight). The best way to do this is at the kitchen sink with a pull out sprayer if you have one. Day 4 (green up the sprouts to develop chlorophyll) (E) At midnight, after watering, expose the sprouts to a light that will be on all night (I used the kitchen fluorescent) to start greening them up. To do this, take the top off of the assembly, and use it as a base to stack the second tray on, exposing the sprouts in the lower tray to the light as well. (F) water again thoroughly at 8am and again at 2pm, keeping the sprouts as is, exposed to the light. During daylight I move them to an area that gets indirect sunlight, but keep them out of direct sunlight. (G) at 8pm, or after dinner, harvest the sprouts. HARVESTING and DRYING (this step takes about half an hour and some patience) Spread out five paper towels on the counter to hold the drying sprouts. Spread out another 2-3 paper towels, layered, to make a cutting surface and protect your countertop. FOR EACH TRAY, place it on this latter surface and harvest the sprouts in small bunches at at a time. Do this by plucking up 15-20 sprouts by the roots, and keeping the hulls aligned at the bottom, lay the bunch flat on the cutting surface. Then cut off about 1/4" of the lower part of the sprout with your sharp paring knife to get rid of the hulls and any discolored (non-white) stuff at the bottom of the stem. Still holding the tops, which should be at least 1" long, spread them out on the first set of paper towels to dry. CLEANING UP (cleaning the SOLIGT screens is a pain but can be done) FOR EACH TRAY, upend the harvested tray and scrape off the underside portion of the roots thoroughly with your sharp paring knife onto the paper towel you've used as a cutting surface. Turn the tray back over and scoop out whatever remains onto the same pile of garbage to discard. Finally, clean the screens thoroughly from both the top and bottom. This is where a pull-out kitchen sink spray is especially useful: if you have one, turn on the water full blast and move the spray head over every inch of both the top and bottom of the screen. This will still leave a few tiny bits, but most of these can be rubbed off with paper towels. Then run the screens through the dishwasher.

Easy to use hard to clean. I need something little easier for kids to clean out. We do science experiments or seed sprouting. The drainage is great! The color and easy to wet your seeded great!

I bought one of these for my daughter as we have been going to to growers market and getting lots of sprouts and we love the guy who sells them but we both want to be able to grow them as it goes to fall and throughout winter. This unit is great and grows sprouts really well. No problems at all with mold and my daughter and I call each other on how FUN it is to watch them grow. Instructions are clear and love that this is stainless steel. I also bought jars to grow the sprouts that way as well and I actually like this way better. It’s also been a really nice bounding experience for my daughter and I.

I find these stainless steel see sprouting trays wonderful. They are easy to clean and stack nicely. I use a Roll of "Microgreen Grow Mat Natural Fiber" and cut out a circle of it to fit the bottom of each growing tray (the ones with the mesh only). This allows me to easily spread the soaked seed and then when it sprouts the roots penetrate the mat and grow into the holes of the stainless steel tray. When I am ready to harvest I can easily cut the microgreens at the level of the mat. When done with the whole thing, the mat pull up and all the roots come out with it. This minimizes cleanup and I don't worry about having to scrape the roots off the tray. I had read about that part from a previous reviewer when I was deciding on this product and came up with cutting these mats into circles to line up the trays. I'm glad I did because this made them very easy to use. I place them by a window during a few hours during the day to speed up growing and cover them at night to keep the moisture in. I rinse the whole tray/plants/mat every day and even as I am harvesting for a period of a few days.

This product looks nice on the counter, grows sprouts as advertised, but the harvesting is a PAIN. The roots grow through the mesh bottom of the pans and you have to pull them out manually. So, if you think you are going to turn the tray upside down to harvest your sprouts when they are ready, forget it. I have tried different seeds; same outcome. I have tried (1) pulling the sprouts manually (often rips them in half or crushes the top part), (2) "shaving" the roots with a plastic scraper (the one I have is not sharp enough to cut the root and even if it was, shaving eliminates half of your "crop". Yes, I know a razor blade would be more efficient, but I'm not sure I want to take a chance of clipping tiny bits of stainless steel in with my sprouts.

I just got this Soligt SS Seed Sprouter, and I'm pleasantly surprised by the quality. The mesh is sturdy and just right for sprouting. The base and lid and the two mesh trays all fit perfectly together. I don't buy sprouting seeds on Amazon (I use Sprout People for their high quality), but for the equipment, this is really perfect. I can have two crops of sprouts growing with varying dates of completion, and because it all stacks neatly together, I can keep my sprouts tidy in the kitchen. For my first batch (I haven't gotten my big seed mixes from my supplier yet) I used a half cup of lentils in one tray, and a half cup of mung beans in the other tray. I soaked overnight in cool water, and then poured them into their trays. You can rinse right in the tray, shake off all the extra water, then stack them up again for another 8-12 hours. Volume Planning: 1 cup is 16 Tbsp. Lentils and mung beans yield about 2:1, meaning that they double (or more) in volume when they are newly sprouted. Even more if you let the sprouts grow into microgreens. For smaller seed sprouts like alfalfa (7:1 yield) or broccoli sprouts (4:1 yield), the mass of sprouted seeds is many times greater than the original mass, so I'll use way smaller volume of seed for those crops: Broccoli sprouts: use just under a quarter cup of seed per tray Alfalfa sprouts: use ~2 Tbsp seeds per tray If you're not sure about yields, check out sprout people's site for nutrition and yield info. They also have some helpful videos there, including how to use simiilar trays.