GIYO CXWXC High Pressure Shock Pump, (300 PSI Max) for Fork & Rear Suspension, Lever Lock on Nozzle No Air Loss (Silver)

Seems good. works well. Feels solid. Easy to use.

Muchos se quejan que le sale aire etc, es muy poco lo que suelta por eso ahí que calcular cuántos psi le metes de más cuando se baje quede bien🤷🏽‍♂️Yo le metí 10 psi de más para llegar a 160 entonces fueron 170Al poner la bomba nuevamente para ver cuándo se bajó queda en 160Pero pues ya es cada quien como calculen

Ce que j'attendais, merci.

Il materiale ricevuto è conforme con la mia richiesta

Having a full suspension bike I thought it was to finally time to buy a pump like this to really dial in the fork and rear shock. I bought the bike in 2013 and my weight has changed a bit since then. My local bike shop was willing to add some air in for me but not to the degree I was hoping. I went to the Fox site to check the recommended pressures and dialed back the rebound speed, and also adding some more pressure for my weight range. Now I should be set for a few years or until my Fox suspension needs a rebuild or a topper.So the Giyo pump is pretty much like the picture. The length seems a little smaller than expected but it still works fine.Since this pump is designed to be a low volume high pressure design, this helps in pushing the air though at much higher PSI's and did so with moderate effort. Both my shocks only needed around 100 psi which only needed to be topped off to 5-10 more psi, and the attached gauge made this simple. I also tried the pump out on a tubeless air canister that was already at 150 psi. It pumped up to 160ish with reasonable effort to this higher pressure. Using a track pump is still more practical for filling an air canister though to at least 160 psi. The Giyo pump is more of a fine tuning pressure tool, stating from flat zero would take considerable effort.The only negative about the pump is the locking valve latch. This part seems too fragile, and some extra care needs to be observed when locking over your valve. As the hose screws over the valve, a little room should be left to for the valve lock. Overall the pump is well made and the price is right. I am satisfied with this little shock pump and think it works nicely for my home maintenance kit.