1PZ SL1-P01 Fuel Gas Tank Petcock Valve Replacement for Yamaha YFS200 YFM250 YFM350 YFM400 YFM600 YFZ350 YFZ450 Suzuki DRZ400 FZR600 LT80 LTZ250 LTZ400 Raptor 660 Wolverine Banshee 350 Grizzly Blaster

I put this on my 2016 DRZ-400SM with an aftermarket larger tank. It fit no issue and the gaskets hold up well. I did have to buy 2 of these though because the first one came broken and would leak continuously. The second one holds up perfectly to my stunting and hard riding.

Great fit and solved my leaking fuel issue. Oem quality, great value for the money and functions as you would expect.

Perfect fit on my Drz400sm. It looks to be made well and works great. Running a fuel line is not a issue.

Fit fine on my 2002 DRZ400 kick start only model with the factory gas tank. The primary tube with the filter is a lot shorter than stock since this is designed for a 4 wheeler. So if you hit reserve, you'll be pretty close to running out of gas. It doesn't leak and is much cheaper than an OEM replacement.

Bought for my 2006 Suzuki DR-Z250. It was an exact fit, and work as good as OEM.

Probably the worst one they could have designed when you install it has to go backwards to have enough clearance for the gas line cause it’s to close to the carb.

Fit great easy install great value

Used this on my 2005 Suzuki drz and it’s been running great. Flip the petcock with lever toward the inside of the bike to give yourself enough room to attach the hose. With the selector lever facing out (normal orientation) the nipple on the bottom will be too close to the carb.

Fits perfectly on a DRZ400, very good upgrade for anyone who has the stock one. The petcock is very sturdy and has a good quality build. Just a bit of a pain in the ass to make the gaz tank fit back in place once installed since its shape is a bit different tha the stock one, but this might only be a problem for an install on a DRZ...

Does it job. No problems with fitment. Switch is a little stiff to turn. The screen it came with didnt fit in the reserve hole . Kept sliding out. Tiny bit of glue fixed that.

I bought three different valves from three different companies. This one was the best quality came with all the gaskets and parts was even packaged the best.

I can confirm that this fits on Kawasaki KDX200/KDX220 and KDX250. The only issue is that the straight adaptor coming off the right side of the petcock that the fuel line is pressed into gets in the way of the carb throttle twist cap. I had to reuse my original 90 degree elbow fitting which presses right in and allows the fuel line to angle down nicely to your carb.

Item fit the gas tank perfectly and now I don’t have to worry about gas leaking on the motor. It arrived sooner than expected.