UniqueFire 1503 850nm IR Illuminator Flashlight Lights for Night Vision 50MM Lens Zoomable Infrared Spotlight with 3 Modes Memory IR Flashlight Coyote Night Fishing IR Light

Great purchase. Works great with my night vision scope!

This thing is Bright! It’s not as heavy as I expected it to be. I mounted mine on a cam-lock ring and I’m super happy with it! I’ll order again. And I love the rechargeable battery.

This is a great affordable replacement for the IR that comes with the ATN scopes. As mentioned in previous reviews the threads on the zoom are way too loose though. I was able to reuse the ATN picatiny mount from my the stock ATN IR with minor tweak. In order to reuse the mount you need to take the glass out of the head of the light then unscrew the IR (reverse thread). Now you can remove the head from the shaft. Remove the 3 o-rings so they don't get damaged. Now on the mount, remove the screws completely and stretch the mount wide enough to pop the plastic sleeve out. Now while holding the mount stretched open, (I used a screwdriver) slide it down on the IR housing. You will need 2 new M3x16 screws as the ones it came with will be too short. Before reassembling the light ably a liberal amount of teflon tape on the threads on the IR housing then reassemble and take to the field.

Great flashlight, you can adjust the beam pattern from wide to narrow. The only thing they got me is the charging port is actually on the battery itself, not on the flashlight.

I like it other than it goes dead fast.

It’s bright in my night vision scope, when you actually get the bezel to stay still. The bezel has a ridiculous amount of movement making it very difficult to use.

Works great. I love the adjustable beam. I like that. It comes with a rechargeable battery and a case. Great build quality. A little bit bulky but I’m not mounting it to anything so it doesn’t matter. Advertised as having a dimmable beam but mine does not do that. Not sure if that’s a defect.

My only complaint was that the 1" diameter section was about .030" short for the offset mount that I ordered. I used my lathe and cut the body slightly to allow this fit. Otherwise it works easily to 300 yards on a day and night scope for predator control.

I use it together with a digital camera which has the IR filter removed. I did not any extensive testing outside yet, but so far I am quite satisfied with it. I choose this type, because it allows to adjust the size of the illuminated area. Also, the possibility to select three intensity settings is very useful. It has an O-ring to seal between lens and housing in the front and also an O-ring sealing the battery cover.