JIUWU 1/4 inch Locking Clips 50 PCS Reverse Osmosis Clip RO Water Line Clips Blue Clip for Locking Quick Connect Fittings for RO Reverse Osmosis Water Filter Fittings

TLDR: 🌟🌟🌟🌟🌟 Highly effective and easy-to-install stress-relief tools for tubing, preventing long-term leaks and potential water damage.I recently discovered these stress-relief tools, which have proven to be incredibly handy for managing tubing installations. Their design is quite simple yet effective – you place the middle of the "U" shape inside the bend of the tubing. This small adjustment significantly reduces stress and helps to straighten out the tubing as it enters the joint.In my experience, not using such tools can lead to gradual compression of the tubing, especially if there's a bend near the fitting. I learned this the hard way when, after eight years, my tubing developed a drip leak at the joint, leading to water damage and a minor flood situation. It's worth noting that these stress-relief tools weren't included with the system I originally purchased from another source.For situations with severe bends near the fittings, I've found that using 90-degree fittings is the best approach. Not only do they reduce strain on the tubing and fitting joint, but they also help to keep the tubing out of the way in tight spaces.Overall, these stress-relief tools have been a game-changer for me. They're simple to install and offer a long-term solution to prevent leaks and potential water damage associated with tubing installations.

These work like a charm, easy to install, put the middle of the "U" on the inside of the bend theyRelieve stress straighten out the tubing as it enters the tubing/fitting joint. if you don't use these and your tubing has a bend right off whatever fitting it's connected to, after a few years (took 8 on mine) the tubing will compress and you'll get a drip leak at the joint, and you'll end up with water damage or a small flood. (These were not furnished with system bought elsewhere). If you have severe bends near the fittings, it's best to use the 90 degree fittings to reduce the strain on the tubingfitting joint, this also gets the tubing out of the way in cramped spaces.

Cheaper alternative to my RO company’s spacers. Fits perfectly and would buy again but probably won’t have to since have more than I’ll ever need with this purchase.

I needed a few extra clips. These were approved by the RO company. Turns out they are a not quite the same; “thick” to stem, so impossible to slip into the slot. I sharpened the ends slightly so that these clips slid into the slots perfectly.

Easy to put on should work good

lost one clip, bought these and they work.

Seemed 2G2BT but def keeps the duotight fittings from leaking. Lifesaver for homebrew keg dispensing fittings. The 1/4 inch clips fit well on my 4mm Evabarrier tubing.

I used these on some push fittings. The fittings are 3/8 ID and the tubing is ATP surethane 3/8 OD.These clips are just a hair shy of the space behind the outer lip.They are easy to install, hold tight and easy to remove if needed.Exactly what I was looking for my 4 way inflation system.

What can I say, exactly as advertised and have fit all 1/4" push connect fittings I own. Shipping was also faster than advertised which is always nice!

بصراحة

Good clips, stops tubes being pulled out easy.

Works as expected

Just as described and works fine