Dash Kit for Toyota and Scion Vehicles Universal Brackets Double Din Installation Trim Bezel (1 X Pair)

Excelent

Installed an aftermarket unit on my Scion XD and there ended up being a small gap on the sides. Which happens to be a normal issue when installing aftermarket head unit on these cars. *I should have done the research. If you're installing an aftermarket unit on your scion, be sure to buy this to fill in those small gaps on both sides. Makes for a clean look and install.

Easy to install. Good quality

Worked for a 1st gen Scion XB. Aust for replacing radio with a double din. I'd the radio is a single din chassis, it doesn't sit flush and had to wrap a ziptie around unit to prevent the bottom from flaring out but worked none the less.

I chose this dash kit over the equivalent Metra for two reasons:1: Lower price2: It ships and arrives faster when buying from Amazon.The Metra may have fit the same, but I’m very satisfied with this one. Also, as others have stated, with aftermarket double-din stereos, it’s recommended to use the original stereo brackets for the best fit.

Product didn't fit correctly. I had to cut some things to make it fit in my 1993 4runner

First of all, this is -not- a dash kit, since it does *nothing* to actually mount or support your aftermarket Double DIN car stereo. Instead, it is meant to fill up the voids on either side of your new stereo, hence it is strictly a trim kit.Depending on your stereo, you may need to do some extra work to make this kit work out. In my case, my aftermarket Double DIN stereo has a tapered chassis and protruding screws. Also, because the Toyota/Scion OEM stereo mounting brackets are made from stamped steel, they have stamped protrusions which interfered with my stereo. I had to drill out the stamped protrusions, make clearance cuts, drill new clearance holes, enlarge existing holes, and use shims in order to get the OEM brackets to align and lay flush. I also had to bend/warp these trim pieces so that they would lie snug against my stereo.In the end, it all worked out, but don't just get this "Dash Kit" and expect everything to simply bolt up. Chances are, you will have some additional work to do.

Good