VIVO Universal Sound Bar Steel Bracket Speaker Mount Above or Below Wall Mounted TV, Fits Behind 23 to 65 inches Screens, 33 lbs. Capacity, Mount-SPSB2

Like it. Works great. Hangs directly off my tv which is wall mounted. Don’t know if I installed it right but I am very happy with the bracket.

4.5/5 pages of the instruction steps are all step 1, but step 1 has 2 main options with 5 more options under each. I just did two different tv mounts with at least as many options and alternate hardware, etc and they were easier than this 😂

Directions aren't the clearest but it does the job

Came with a plethora of metric bolts for mounting in a variety of configurations but nothing was labeled in the packaging so identifying the items was impossible unless you know what a 6mm bolt looks like on sight alone. Only comes with a few nyloc nuts that are stiff as heck to thread on. Instructions are awful to understand and dont seem to be written by professionals. Due to the large array of slots in the pieces it did make it easy to configure a method to attach my soundbar.

Normally this kit is unable to be setup with the short pieces at a right angle and I needed them at a right angle facing away from each other. I was able to do that by putting the long pieces upside down. The sound bar is now mounted nicely.

Have a 75 inch Samsung TU7000 bolted to the wall with the sound bar mount under it. Looks great, works great.

I can't say there is anything special about this mount, but for the price it does its job very well.

As an engineer myself I have to admit that it would be tough to meet the "Universal" adaptability claim of this product. For example the Roku Sound Bar I attached to my 40" TV requires two ¼”x0.5" 20-thread/in mounting screws. Since the VESA standard is metric, it should be no big surprise that these screws were not included in the VIVO package. Also the holes were slightly undersized for these screws.I found the included instructions detailed, and written in good English but difficult to understand. I suspect that the instructions were written separately from the illustrations. I recommend that you assemble a pair of the long and short leg together using picture in the instructions and the supplied carriage bolts and then try them on your TV and sound bar to see how they fit,using the "cut and try approach".I wanted to mount my sound bar above the TV as there was not enough room below the TV due to its "table" legs.This increases the instability of the TV to tipping so if you are planning to do this, you should include a anti-tipping strap or cable of some sort.

not directly compatible with Sony HT-A7000, though I was able to mount it by using the included sony wall brackets and an M6 bolt+washer+threaded nut, I chose to remove the soundbar mount as it didn't seen stury enough for my roughly 20lb soundbar. I think the 33lb support is a bit too generous of a rating. On the upside, I only paid $23 so it's not too much of a waste. The soundbar will be staying on the benchtop instead.

YAMAHA SONY このままでは使えない、固めの板に取り付けてビスで引っ掛けて(壁に取り付けるように)テレビよりぶら下げて使用しています、板の加工ができない人は使用できないと思います。

Good

Good soundbar TV bracket. Easy to install, arrived very quick from Amazon.

A pesar de son pocas las opciones que existen de este tipo de aditamentos, funcionan muy bien