Montech X3 Mesh, 6 Fans - 3x 140mm & 3x 120mm Fixed RGB Lighting Fans, ATX Mid-Tower PC Gaming Case, USB3.0, Door Open Tempered Glass Side Panel, High Airflow, Black

Nice roomy case. Handles my 300mm long GPU no sweat. 6 fans comes with it. They all light up RGB and are the same. They cannot be synch or programmed, just static RGB, no breathing/cycling. But you get 6 working large fans that are quiet in the price and they're preinstalled and prewired and it's done well. Lots of room and places for cable management. Looks modern without looking like cheese. Comes with mesh filters on all areas. Overall can't say anything bad about it, its a good case, easy to build in, no fussy weird stuff. Lots of room on the back side for cables so you're not trying to stuff it all and hide it.

This case is almost perfect!! The fans are beautiful and work great. The vents are plenty. The size is compact, but more than enough room to install all the things! It fits a 2060 with ease!! The only thing I wish it had more of, is hard drive slots. However, this case has been in use for the last half year and is still doing its thing absolutely flawlessly!! I would get this case again and again for my future builds!!!

This is one of the most feature-rich high-airflow cases you can get on a budget. The magnetic glass door which comes off without any screws is amazing, makes cleaning the case a breeze. The mesh front does a good job keeping dust and cat hair out of the system without sacrificing too much airflow. The fans included are fine, the molex centipede in the back is a bit of a pain to cable manage, but they leave you plenty of room to do it. As much as the back ports have pop-out designs for the PCIE slots, you can easily just slot the unused GPU ones back in, making it kind of a non-issue. If you're an enthusiast who wants the best RGB and fan control, this isn't the case for you, the RGB is static and the fans are too. But for the price, it's frankly unbeatable. A bit thin and flimsy in places, but a pleasure to build in, great size, great airflow, and, again, price tag.

This case is a great case and value. The fans installed are quiet and even when they spin up you hardly even notice them. The case works great, the glass side is easy to remove to work inside and cable management is easy in there.My only issue is the button for the RGB is tiny and is a push button that an adults finger has issues pushing to turn them off since it's recessed below the case top. The power and reset buttons don't reset and are flush with the case. But that RGB button is frustrating, especially when it's night and your winding down for the evening and don't want them on. You have to keep a pen or something to push it in.The way I'd suggest to fix it is to either make it bigger, which would mean the other buttons would need to be bigger to accommodate it. Or make it where it pops up instead of recess into the case.Realistically is it a reason to hate the case? Not at all. It's just a frustration that shouldn't be there and is what keeps me from giving this a 5 star rating.

My motherboard died, and I needed a replacement. The only option I could find was an ATX board, which meant I also needed a new case. I went with the best-looking one within my budget, and to my surprise, it turned out to be a great choice.This case is incredibly easy to work with and well-built. My absolute favorite feature is the glass side panel—it works like a refrigerator door. Just pull the handle to open it, and when you let go, it closes on its own. It is so satisfying. No screws to fumble with, no struggling to slide it back into place.I tinker with my systems a lot, and I have a bad habit of leaving the side panels off, convincing myself I’ll put them back on later… but I never do. This case completely solves that problem, and for once, I’m actually excited about having a fully assembled computer.The top panel, where the buttons are located, is also really well-designed—everything is flush, and there’s a switch to turn the LED lights on and off. Cable management is a dream, and as you can see, even with my laziness, my system looks pretty clean—aside from the smudges on the glass!

So first off let me state that this case is great for budget minded people. The build quality is better than I expected and the airflow is great. But please read below because there may be some deal breakers for you in my review.Now let's get into some of the issues. For starters, the motherboard tray/mount is very flimsy. Having the board installed does increase the rigidity but it's kind of sketchy trying to plug in certain cables. Issue #2 I ran into was the SSD sleds on the back side of the panel are set up in such a way to where I couldn't get my sata cables in because there's a lip that juts out and prevents a flush mount. Issue #3 and it's my biggest problem with the case, 4 of the fricken motherboard standoffs stripped out when I was threading in the screws. I've built 2 PCs now, so I might not know everything, but I know which screws to use. So now the right side of my motherboard is barely held in and 4 standoff holes are now useless. Another tiny issue is that my PSU is mounted in such a way to where a small portion of the fan is obstructed. Not a big deal for a budget case,just be mindful of that as you might need a spacer to push it deeper into the case.I did not use the fans it comes with as for one they aren't ARGB, and for two, they are powered by Molex, and I'm not a massive fan of that (pun intended). Cable management is surprising great, though getting the back panel on was a bit of a pain even with my cables secured tightly. The "top panel" io is pretty good, since I'm not using Molex for the fans I just kept the reset switch and LED button unpowered.The main compartment has plenty of room for my M Atx build with a rtx3050 8gb GPU. I still have room on the top of the case for fans if I need it.All in all this case is much better than the one I replaced, just do your research before you buy.

Amazing budget pc case. RGB doesn't matter to me but if you do just know that this doesn't have moving rgb. Airflow in this case is amazing.