Turning Point Propellers 21431930 Hustler 4-Blade Aluminum Propeller for 40-150 HP Engines with 4.25" Gearcase - 13" x 19", Right Hand Prop LE1/LE2-1319-4

The 13x19p 4 blade has been a winner on my Suzuki DF140. These are challenging motors to prop because of the very low gear ratio (2.59) Large 14" diameter small hub props are required. Not a lot of aftermarket choices. I was using a 14x18p 3 blade SS. I wanted something with better midrange cruise and stern lift. I was hoping a 4th blade would compensate for smaller diameter prop.The Hustler gave me what I was looking for. It lowered my rpm by 400 revs from 6200 TO 5800 which I was hoping to for. Still gave me great holeshot but allowed me to stay on plane at a lower rpm. I also got a 2 mph increase speed. Not too shabby for such an economical price. Will have to see how it holds up over time.

I’ll just say these are outstanding props. My boat has never been as fast as it is now. Since no one else is saying it let me save you the trouble I went through. These 4 blade props run 3inches bigger than they are. Meaning if you buy a 17p it’s going to run your rpm’s at levels of a 21. Take my word for it buy 3 sizes smaller than you need in a 3 blade. Also this particular prop is for a 4.75 gearcase. If you need the 4.25 get the 2143. I had to return and buy the 2143 version. Had no idea until I received this one. Now I have to return the 2143 because I bought the size I needed and they run big like I previously stated. So do your research get the correct size and you will love this prop. I wouldn’t be going through all this trouble if it wasn’t 1k% worth it. My boat 90hp Johnson on my nitro 170tf went from about 35 mph to what feels like 50 and the steering feels like power steering on a corvette. Amazing.

I had high expectations for this propeller, and while it has met most of them, it definitely needs to be known that one should treat this 13x19 propeller as a 13x21.My previous prop was a 3 blade 13x19 Mercury prop. Holeshot was okay, and top speed (with a 90HP Merc ELPTO 2 stroke) was around 43 mph. The prop had chips in the leading edges and was wildly out of balance.This new 4 blade prop is smooth. It pushes a ton of water and response is amazing. That being said, I can get over 50 mph, but my holeshot is sloooow. I'm good with it, as I'm more of a fishing guy than a skiier.FYI: my boat is a 1999 Astro fish & ski that weighs 1750. It HAULS ASS now with this prop. Almost too fast for my liking.

I originally bought one of these at a local propeller shop.I agonized over the purchase. Someone called in to his shop while I was there with all the same questions.Finally, the owner told the caller that if he bought it and didn't like it, bring it back.Music to my ears. I wish he had told ME that. I bought it and have not regretted it.I bought this one to replace the other after hitting a rock.It has added immense performance to my boat over the previous stock prop.Faster on plane, tighter turning and more stability (aluminum boat, cuddy cabin).

Switched from a 3 to a 4 blade and also needed a bit more pitch since I carry extra weight with trolling motor, batteries and T top. The pitch helped me get on plane flatter, faster and maintain plane at lower speeds. A bonus is the boat is easier to control at low speed when moving through no-wake zones. Shipping was fast. I'll buy from these folks again.

Looks like a nice prop. This is not the 2 in 1 Turning Point prop. This is just a standard clever style 4 blade prop. It would be nice if the seller would state this in the description. I'm returning. I think this must be an older version.

I had a 13.3 x 20p 3 blade couldn’t get boat on plane fast enough so I went to hustler 13 x 19p 4 blade man what a difference . I have a mako 1901 with a 115 Mercury lost some top end it would 46 top speed now 38 46 was to fast in a bay boat 38 good speed. You can get up on plane asap and stay at a slow speed to.

The prop shown in the pictures is not the same prop I was sent, seems like maybe I got stuck with a older model or something. The big deal about this prop is supposed to be the two different blade designs making it a great all around and fast propr. My blades all look identical - like the pointy ones in the pic. I did not return cause I needed it for use asap. The prop works ok, but I have a steeper pitch 4 blade solas for water sports and it seems like a MUCH better and far smoother running prop. Very first use with the hustler, paint from all 4 blades peeled off right in the middle of each blade! I tried cleaning, light sand, special primer and special prop paint - seems like nothing will stick. I suspect a casting issue with outgassing...

Comme décrit, par contre ne pas oublier de rajouter le kit Nécessaire si vous en avez pas déjà, il n’est pas inclus