SamaN Interior One Step Wood Seal, Stain and Varnish – Oil Based Odorless Dye - Protection for Furniture and Fine Wood (Antique SAM-301, 8 oz)

I love this stain! goes on easy and dries quick, leaves a nice soft warm glow. Wasn't sure if I could use it on my hard wood floors but I gave it a try. They are beautiful! and the finish is holding up great. I have had both plumbers and electricians walking on them with ho problem. I have moved furniture around without scuffing my floors. I sandaled and stained my baseboards and doors and they came out beautiful. I loved that I didn't have to buy a stain and sealer separately. One coat covered everything. The only problem was if you get a drip brush it in quickly because it dries fast!, All you have to do is be careful and neat about applying the stain

I love this stain so much. I've purchased like, 4 bottles of it. I am not into the whole white kitchen aesthetic that has been so popular in recent years and when we moved to the house I am in now, I decided to just stain our cabinets to give them a makeover. This stain has held up over time. We stained the cabinets 3 years ago and they still look so shiny and have this beautiful golden oak color. I think the cabinets have a classic, timeless look now. We went on to stain other things in the house with this color. I even used it to stain a plant stand because it just looks so good! I highly recommend this product. It is worth paying a few extra dollars for. I've used the stains you find at other stores and nothing looks as good as this one.

Great product, stains wood great, BUT THERE IS AN ODOR, STRONG ONE TOO .

I used this to stain some 2x12 inch maple boards being used as shelf risers inside of a cabinet. Honestly, I just bought this product because it was the cheapest all-in-one stain I could find. I was pleased with the result. The color was exactly as pictured in the Amazon listing, a dark warm walnut. I put on 4 coats and waited 2 hours in between each. It is a milky color when it’s wet but dries clear. You definitely need multiple coats to get a rich color. This product worked well for my small project. The color ended up matching the stain inside my cabinet perfectly.

it's a very nice color, and it seemed to be of nice quality!

A end table for my chair.

Need 2 -3 coats, but ended up looking great.

I’m stained a lot of furniture for my life. I saw this and thought it would work out well. I would never buy again. Did not go on nice and it was messy. Now I have to shop for new table and chairs . The stain came out so bad. I’m now shopping for a new table and chairs

To be honest I figured this product would be next to useless. One normally needs pre-stain, the stain solution and the polyurethane to get a nice glossy stain job. However after reading so many 5 star reviews I decided, what the heck and will take a chance as after all it is not expensive.I followed the instructions and after 3 coats it was looking good. I just for an experiment put on 5 coats and got a nice glossy finsih were one can almost see ones face in itI am super impressed with this product and did not even know it existed a few days ago. Maybe it has been around for years but I was not aware of it.I will never buy the 3 stage cans again as this drys fast has no odor and gets the job done with little effort. In fact I just now ordered the big size can and that will go a long way.

Used this product to finish my stairs. Handrails are wood, side trim is laminate, and trim under the shelf is rubbery compound stuff.It was priced reasonably, delivered quickly, and provided the desired finish.I don’t usually like stain, but was pretty pleased with this product.One 32oz tin was easily enough for three coats plus touch ups. I’ve still got over quarter of a tin left.The tin recommended using a natural bristle brush, which I used for the first coat. It was horrible and uneven.I then bought foam brushes from Amazon and used them for the other coats. This was much better and easier. Ignore the recommended brushes and use foam, it will make things much easier.The bristle brushes didn’t clean up very well, and the foam brushes are pretty much disposable after a couple of uses.Overall I was happy with this product, and you can see from the photos that the finish is okay (though I’m not an expert as you can see).

It is overall a satisfing experience and product. Easy to apply, low odors. However, because it is a stain with vanish, the first coat did the stain on the wood and it cannot be change later.For the first coat, any uneven painting, or more paint from one area than the others will cause the wood color look uneven, and there is no way to fix it. Because it is stain and vanish all-in-one formula, stain on second coat is blocked by the first coat, which cannot reach into the wood.I was making this mistake, then try to correct the color my applying multiple coats, and that does not help. What makes it worst is after 3+ coats, perhaps its too much, somehow makes the surface of the paint feel sticky, no matter how long the paint is dried.

It looks amazing

I bought this product to refinish a tabletop that was ruined by accident by my landlord's handyman...I had never done anything even remotely like this before and have no experience with woodworking, painting or staining.I picked this product because it seemed easy to use and didn't require me to buy many different products to get the job done. I don't plan to do anything like this again so buying 2~3 different products would have been expensive and wasteful.I sanded the tabletop down and with a friend's orbital sander (first with a coarse sanding paper and finished it with a fine one).I applied a coat with a new dish sponge, with the wood grain, following the instructions on the can. It was really easy to work with and I didn't have to go super fast. The stain was forgiving. If you forget a dollop somewhere you have a little bit of time to wipe it off before it turns into a dark spot. I applied really thin layers and wiped the excess with a paper towel.I did two coats and the colour darkened a little but not as much as I feared. I picked the colour (amaretto) online, so I couldn't see the can in person, but I lucked out and matched the existing stain perfectly!The stain dries really fast (even though it was quite humid and cold) and leaves a smooth satin finish. Liquids bead on the finish, so I think it'll do a good job being resistant to water damageThe first pictures are outside with full afternoon sun: tabletop before, bare wood and one coat of the stain.Closeup pictures is after two coats and in interior lighting (it looks a bit darker than in person on that picture). I think the stain matches the photo at the bottom of the can pretty well.