VEVORPaintless Dent Removal Rods, 89 PCS Paintless Dent Repair Tools, Golden Lifter Puller Car Dent Repair Kit, Glue Puller Tabs Dent Puller Kit for Auto Dent Removal, Minor Dents, Door Dings

Unfortunately I don't have any photos because the white car made it difficult to photograph the dents that I was working on. That being said I had two on the top of the rear fender, one of them about the size of a golf ball and the other about the size of a half dollar. I took my time, followed the instructions ,watched many videos online on how to do it, and I have to say it worked flawlessly. Now the reason I bought this kit was for a larger dent on the side of the fender about 3 in long and slightly creased, not a sharp crease but not as straightforward as a round dent. Slow and steady, I took my time and after about an hour and a half I got it to the point where I was having a difficult time seeing it to make any adjustments. I would say it's about 95%. That's a win for me! PDR can run $50 for a small dent to hundreds depending on the size. At $43 for this kit I probably saved about 150 bucks. I can see someone doing damage to their vehicle if you're not careful, so again slow and steady wins the race. Couldn't be happier with my purchase.

I've used this kit to remove a dimple on my door. I would say it was repaired to 95% of what it was before. I'm happy with the result. The kit comes with a variety of tools including tapping tools for the high spots formed when you pull out the dimples. The kit also comes with instructions so it was easy for me to follow along. I will recommend this to any DIYer.

Great assortment of glue-able dent pulling sizes/shapes, and the slide hammer, and pulling tools worked really well.Glue gun, glue sticks, and spray bottle were included and worked like expected.The stripe light is inexpensive. LEDs are only on the perimeter, which made it too dim to be useful on the dents I repaired. The suction cup, bend-able light holder provided was impressive though.Plastic tipped finishing tool is okay, but tips are too hard to finesse high spots well (I glued leather tips, shaped accordingly, to two of the tips I needed, which improved results). The "tap" hammers were both great and worked well with the finishing tool.Repaired a dent on a hood, and none of the rods were shaped correctly to reach the dent. Likely specific to my situation and the vast assortment provided probably work great for dents in more accessible areas like fenders or doors.It's relatively easy to get non-creased dents 95% removed and look satisfactory. It takes a bit of patience and time to get them to 100%.

I'd like to say that it came on time and as described, I would like to add though that it may be good for small things and dents in your plastic bumper but the glue does not hold as good as expected,,

This kit has so many positives that I still can't believe it.I am not a pro and don't need pro level tools but honestly, this haseverything I could want to fix a series of dents on my recently acquired car.I saw the many dings on the side of the car and thought I could hire someone to do PDR and make it almost perfect.But the folks I have contacted never got back to me.(So, I got a harbor freight kit for $15. I had to rewire the glue gun that was only 40 watts.Quality was not good.)This Vevor kit has a much better glue gun with an on-off switch.The line board LED is fine for me. I use it in my garage and if I turn down ambient light, I can get good detail.The glue tabs are different sizes and shapes and the puller is metal and very nice quality.The slide hammer is plenty heavy and beautiful looking. I haven't tried it yet. The rods are a pretty nice assortment.Maybe I will use them. Many shapes and sizes.I used the glue puller for 2 dents today and I was pretty amazed at the results. The worst one ...I can't even see it anymore. I will probably need to do a little more work but....Honestly, this kit is awesome.Tap down with many tip sizes and shapes. I put the small parts in a fishing tackle box where I have everything sorted by size and shape. The Vevor tool bag seems perfect for the glue items.I have the rods and heavy metal, slide hammer separate.Instructions that came with it actually make good sense and are well written.I will trust this brand as a result of this purchase.Many Thanks.

I can not provide feedback about if this product works to effectively remove dents because a key component came broken and I was unable to get the issue resolved with the Seller. After unpacking the many pieces and preparing to work on my minor dent, I discovered that the Hot Glue Gun was not functional. It did not heat at all, so it was not possible to attach any of the dent pull tabs.Normally I would have returned the product to Amazon and find a similar product from another Seller. But I decided to give this Seller, VEVOR, a chance to replace the Hot Glue Gun, which I assumed would an easy and quick process. I contacted VEVOR customer support via chat and explained the problem. The customer support representative asked for photos or videos, at which point I pushed back and stated I did not understand how a photo or video could help demonstrate that Hot Glue Gun did not heat. He agreed and indicated I would get a response within 1 to 3 business days. I received an email on the fourth business day indicating that I would receive a response in another 3 business days. After multiple very frustrating email exchanges, I received a response after 10 days that VEVOR would send a new Hot Glue Gun, but it would take 10 to 15 days to even get shipping tracking information and no specified timeframe to get the replacement part. I rejecting this offer, since it would go beyond the Amazon return window. The next day I received an email offering to provide an immediate shipment of a replacement product. If this was an option, it should have been offered at the start of the process. I only include this level of detail to show that how VEVOR customer support frustrates and disrespects its customers. Based upon my experience, I would recommend avoiding this Seller.

Very nice kit!!!

It’s decent, I have an aluminum f150 it got the dent out but it took some work