USARemoteUncut Transponder Ignition Key fits Toyota with 4C Chip, Set of 2

Ordered a week ago, delivered today, Had Keys cut and programmed the keys too my vehicle with supplied instructions, works great, Would buy again.

Does not work with tech stream. Waste of money do not buy!!

worked great. easy to set up for my car

Did not work on toyota sequoia

I saved $140 by buying two keys from Amazon and programming/registering them myself and getting them cut at Home Depot. The locksmith was going to "cut me a deal" and only charge me $80 each. My 1999 Toyota Avalon requires keys to have a transponder chip for them to work, and they have to be registered to the car.I bought two "chipped" key blanks from Amazon that were the Toyota 4C type that my car requires. I got both for under $14, and they got here overnight. I registered the keys myself, in my car, using the procedure below. It was easy and took less than five minutes. Then I took the blank keys to Home Depot and they cut them for $3.50 each. They work great.This is the registration process (there are videos on YouTube):- Take your MASTER KEY (not the valet key) and insert it into the ignition . Do Not Turn! The flashing security light will go out if you have a master key. You must have a master key for this to work.- Within 15 seconds of inserting the master key, depress and release accelerator pedal 5 times.- Within 20 seconds depress and release the brake pedal 6 times.- Remove the master key.- Within 10 seconds insert the new "blank" key into ignition. The security light will continue to flash.- Within 10 seconds depress and release the accelerator pedal 1 time. Your car will start the registration process.- After 60 seconds security light will go off. The new key is registered.Repeat the process to register other keys.