Ultimate Washer UW16-SE1421 1/4" Male NPT Screw Type Surface Cleaner Nozzle, 25 Degree 2.0 Orifice Spray Tip

Was just what my deck scrubber needed, works like new again, tips do not last forever! As soon as you see streaks and or stripes or lines left after 2 passes tips are worn! Trick to a good job is cross hatch cleaning and good tips! Also if your scrubber has a grease fitting give it a small shot with a grease gun. Helps to keep it spinning smooth.

used in my be surface cleaner with great results!

I have them in pressure washer broom and they work great

I pressure wash quite a lot doing apartment maintenance, so I know how important is can be to get the right degree tip for the job. Too much and you can damage the surface or take off paint when all you are trying to do is clan and wash a surface. Too little pressure and you will find yourself working harder than you should.

Change the three nozzles on my large pressure washer surface cleaner from 2.5 to 2.0, psi went from 1100 psi to 2500 psi now it cleans a lot better.

Look fine. We'll see how they perform.

This is 1/2" diameter treads not 1/4" as listed

I had 2.5 tips for my 4K 4gpm washer. It’s good because I get full water flow and less pressure (better for newer concrete) but these actually give me pressure needed to clean really dirty spots. They’re the exact same in hole size and still gives me consistent results. Thank you for the great product.