amFilm3D Curved Tempered Glass for S22 Ultra Screen Protector Samsung Galaxy 5G 6.8 Inch, Fully Compatible with UltraSonic Fingerprint Scanner and S Pen, Upgraded Easier UV Gel Application(2 Pack)

They make it easy to apply the sreen, without bubbles or wrong and accidentally apply the screen in wrong position through the plastic holder, following the guide is clear,Actually my screen for ultra s22 was broken at edge with spider marks , i searched for good qulaity screen to try to protect the screen from being completely damaged, hope if it will work.

Overall the glass sheet is really good and the installation is a breeze. However, upon installation I noticed that the protector is lower than it should be exposing some screen area on the top even though I used the installation block that came with the glass.More importantly, I noticed that there is a small scratch right in the middle of the protector which is discoloring the screen, it's a small one but really annoying for a new glass sheet. And sadly Amazon apparently doesn't replace Prime International products.

Installed the cover perfectly as instructed, however a bubble appeared at the bottom corner the second day, also finger scanner not working properly with this protector, not happy with this purchase at all and i think not possible to return as one cover used already unfortunately, had high hopes for this brand.

Glass so thick that the fingerprint touch does not work even if you increase touch sensitivity on samsung.

First, I have used several brands of screen protectors.There are basically two kinds. Ones like this that bond completely to the screen, there are only a few of this type or ones that use adhesive on the edges. Most of them are the second type.The quality of that second type vary greatly. Their customer service policies also vary greatly. Most of them are very hard and difficult to scratch with metal objects like keys, a few use cheaper glass that scratch easily. They vary in thickness, so some crack more easily than others. Some are cut accurately and fit well, while others can interfere with the camera or haveclios that catch on clothing or even skin.But there is one thing they all have in common, they leak moisture. Some will get moisture under the glass just from facial sweat. Some will get moisture if you drop it in a full sink or a swimming pool. ALL of them will flood of you go into the water with them.I fish and go rafting. Every screen protector I have had has leaked if submerged for more than a few seconds. This screen protector, which is bonded to the screen, does not leak, even if I take underwater photos with it.But there are more advantages with this type. If the screen is adhered only on the edges, there is a tiny airgap between the protector and the screen. This makes the screen less sensitive. This may not be a huge issue if you are just tapping, and even swiping will usually work, but if you have a pen, stylus, or finger print reader, it gets worse. Most people eventually do recalibration and adapt themselves to the loss of sent sensitivity.HOWEVER, that tiny gap also creates an impact with the screen and some types of drops will still break the screen. Without exception, I have broken the screen on every phone I have owned over the last 10 years. Some look asted a month, a few lasted a year, but because of my active lifestyle, I have never traded in a smartphone without damage... Until now!The bonding agent on this screen protector remains slightly flexible. I have dropped my Samsung S22 Ultra countless times. The phone is still perfect. The screen protector itself lasted over a year and a half. Eventually it cracked. But bits of the protector remained on the screen and continued to protect it until I was able to replace it.Removing the old glass was simple and I think I may have spent 20 seconds removing all of it. The bonding agent remained on the protector and the phone was spotless. I put a new protector on using the cleaning pads in the kit and no further effort was necessary.Nothing has ever worked as well as this. I can't speak for the Whetstone brand, Wich uses a similar technology as I have never used that one, but thisisthe best I have ever used.The curve is perfect to my phone. The cutouts are also perfect. There is a a fraction of a millimeter margin between the protector and the phone frame. It is very tiny and allows you to attach a case.to your phone. In spite of some comments I have read, you will not notice it when you use the phone and it does nothing to compromise the protection. I would say the gap is about the the thickness of a business card. Once you are using your phone you will not notice it and not a single person who has handled my phone has noticed it. In fact one person after seeing the scratches on my phone case asked why I was not using a screen protector and I had to show them the margin which the had not noticed.Of course everything has a downside and this product is not an exception. That down side is the installation is not as easy or as fast as the other type and one must be careful to follow the instructions carefully.When I received my first kit, which includes two protectors, it was defective. There was not much adhesive is one of the tubes and no matter how long I waited or how I tipped the phone, I could not get coverage. I would estimate that the second tube had only about a third of the adhesive as the first one. On my second attempt, the tray would not release the sliders and when it let go it made a big mess and the bubbles could not be removed. So I had to contact the company.No problem. Perfect customer service and they immediately sent replacement glass and the supplies to install it. I had trepidation but it was unwarranted as the install was a snap. I threw away the old guides as the new ones were smooth and easy to use.Pros:Excellent customer serviceNearly impossible to see once installed.Does not affect screen sensitivity. (I did not turn screen sensitivity on nor recalibrate).Will not flood.Superior protectionDoes not shed glass splinters if brokenCons:Installation required carefully following instructionsWritten directions could be written better (Definitely watch the video).Installation takes 5 to 10 minutes (Vs others which take 60 seconds)Not the least expensive solution available.So what will my next protector be? Without any doubt, this one again. In my estimation it is worth the few extra minutes and the extra cost.

Es excelente el producto, bien puesto pareciera que no trae nada el celular. IMPORTANTE! Poner dos botecitos de pegamento a cada cristal, de lo contrario se despegará al poco tiempo. Recomiendo ver la guía de instalación de YouTube de DOMEGLASS y no la de este producto, porque van a quedar burbujas, no presionen la zona de la huella con nada porque marcará error, ni siquiera con la pesa de metal que viene en el kit, mejor dejen que se seque bien unas 8 horas antes de presionar el sensor, ya con eso no tendrán problema alguno.

اريد الاسترجاع لكن ميعاد السماح فاتني لا احد يقبل لصقها لانها تضر بالجهاز و توءثر ع الشاشه الاصليه. كان يجب التوضيح اكتر بالشرح. سيئة.

I've pasted Whitestone dome glass on my wife and my s22 ultra the first day when we got the device, and is having fingerprint unlock issue since then. But because of the premium price we've paid for the glass, we thought to turn on face unlock instead and let the glass stays on the phone for at least 5-6 months before we changed to another one.However, the fingerprint unlock issue had been such an annoyance that I changed to a local brand, which many reviewed that the fingerprint unlock works, but it doesn't worked for me. I bought two pieces, one for my wife and one for myself, end up I used up both pieces, they are not any better than the Whitestone dome glass.I saw amFilm while searching in YouTube on reviewed for tempered glass installation for s22 ultra, and decided to give it a try. Amfilm didn't disappoint me, it is definitely the best ultrasonic fingerprint unlock compatible tempered glass you can find for s22 ultra! I found that the unlocking speed is no different from naked screen, I'm so happy that I bought amFilm! 😄

I was not happy with this purchase because the unit had 2 manufacturing defects which effected the installation of the screen protector. First of all, the sides of the phone template where one would insert the longer absorption pads to soak up the excess glue was not long enough to easily insert the pads nevertheless, you can cut off a small amount to easily ix the problem. However, the other manufacturing defect which is the area where you would put the screen protector to drop it on top of your phone screen was really tight so when you pulled out the guides the screen protector stayed put and when you push down slightly it will drop down quickly and this is a no-no because as directed by the instruction one should set screen protector slowly so as to not cause any bubbles. I wasted $40+tax because the both protectors kept getting stuck at the mentioned location causing air bubbles in both installation; I will look for a better product to buy.