2X Fits Keyless Entry Remote Car Key Fob 4btn Van for Ford Transit (OUCD6000022)

Worked perfectly with my 2015 Ford Transit Connect LWB. Mine has the remote start feature, which I didn't know it did until I accidentally discovered by trying to lock the vehicle by pressing the lock button three times. Since I only had one working key, I researched if there is a way to program a second key with only one key. In my research, I learned that the remote start feature can basically mimic a second functioning key. So the following process only works on Ford vehicles that have the remote start function.So here's how you do it:1) open the drivers side door and sit in the vehicle...leave door open2) using the working key buttons, begin process of doing a remote start, but just before the engine is about to start, tap the brake to shut of the remote start. That will simulate the first key.3) Immediately take your good key and put it into the ignition to the "on" position. Do not start it. Leave it there for a second, then turn it off and pull it out.4) Wait three seconds, then insert new unprogrammed key. Turn it to on position and let it sit...the horn might honk, locks may cycle or in my case there was an audible beep which means the key is programmed. The vehicle may start automatically at this point as well. You should have a working key now!Keep in mind that this is a blank key, so you will need to get it cut. A dealer will do it very expensively for you, so take it to a locksmith. Call around in your area because some locksmiths will also charge you an arm and a leg because they can. I got mine cut for $45.Good luck!

The key appears very similar to the factory key. I haven’t checked all the buttons, but so far locks and unlocks fine. I went to a locksmith and they wanted $180 just to cut it and program it. I checked with my local Ford dealer and they were able to cut it for $20 plus tax and then I used the technique you can find online which involves turning the ignition on and off eight times. It worked immediately. I bought my van slightly used and it only came with one key. I will probably use this key now and keep the factory key in a safe place. Get a spare before you lose one! Some vans may require a chip inside for the ignition to work. I read mixed results online about my van needing one, but apparently this key works and it supposedly doesn’t contain the chip.

Exactly what I needed. It was only $10 per key to get them laser cut. Didn't need them to program them because they are extremely easy to program.

They worked great!

Received promptly and had them reprogrammed within an hour! Much less expensive than going to dealership

esta sellada la cargada a la hora de quitarla para pasar la otra llave se propio todo

this product worked i now have 2 key fobs that are programmed to open my 2017 transit van. i went to the internet to find out how to program the fobs.THE FOB COMPANY WANTED ME TO JOIN THEIR WEBSITE AND PUT A CREDIT CARD ON FILE BEFORE THEY WOULD GIVE ME INSTRUCTIONS ON HOW TO PROGRAM THE FOB!!!DO NOT USE THEIR SERVICE.you can find the instructions to program the new fobs on line for free

Good