Upgraded 279838-Dryer-Heating-Element-W10724237 fit for Whirlpool Kenmore 70 80 Series Cabrio Roper Maytag Amana Admiral Roper Dryer Heating Element Dryer by AMI PARTS

I love that this comes with all the parts you need to fix the heating in your dryer. It does not come with instructions, though it doesn't really need them. I am a woman, and I was able to do it within 10 minutes, with no instructions, and no how-to video either. The best thing to do is to take pictures of where the wires go and to which part. I highly recommend you get this set if your not sure what is causing your dryer not to heat up. It pretty much replaces everything you need in this one kit. And for the price, unbelievable. When I got done with replacing all of the parts, the dryer started heating up in no time. Also works great and durable. I do not regret getting this for a second. I HIGHLY recommend.

The media could not be loaded. This upgraded heater element arrived the same day it was ordered which worked out perfectly. It was on sale for $25 and it’ was simple to install only taking about 10 mins from start to finish. The only downside I’ve experienced is the products lifespan. This is my 3rd aftermarket element; the first lasted 3 mths and the 2nd lasted 6 mths. However, irregardless of its lifespan, it’s still cheaper than a new dryer.

The dryer stopped turning on. The thermal fuse had blown. Found this kit, good price. Easy to install all the new parts. Dryer works like new again.

As others have reported, the replacement heating element stopped working after a few weeks. But I'm here to tell you EXACTLY what the problem is.1. The resistance coil is attached to a metal plate that is TOO THIN. There are also a lot of large holes in the metal plate that were made to allow clips to be mounted. The resistance coil is attached to these clips, which appear to be made of ceramic. The OEM version has thicker metal for the plate, and the mounting holes are much smaller.The result here is that the metal plate begins to warp outward under the heat stress, most especially the heat stress coming from the coil, which sits between the metal plate and the metal mount on which the heating element is attached. Eventually, the metal plate warps enough that some part of the coil will touch the metal housing. Instant short to ground, accompanied by a tripped breaker and likely rupture of the resistance coil.2. The resistance coil itself is TOO THIN, notably thinner than the OEM version. Among other things, this means that this coil will have more of a tendency to warp and will have a much shorter life span.I've included a photo of the heating element where you can see the carbon build up on the metal plate. The plate is easily bent with a little hand pressure and is flaking off residue due to rapid corrosion. When I opened the back of the dryer, you could see flakes of corrosion building up inside the dryer housing along the bottom.So understand: You have been warned. The OEM version came in a box clearly marked "Whirlpool Corporation Factory Certified Parts." To be sure, inspect the plate and coil and compare with the old OEM version if you still have that available.

Actually the dryer has been working perfectly fine after the repair been about 3 months now and the price is economically affordable,the most important thing is to keep the exhaust vent always lent free to keep the element from over heating,other then that it works the way it should and drys my clothes very good

Everything fit and worked as it should.

Very nice kit and great price. Installed in less than an hour and all the parts were a perfect match.

Good parts, perfect fit, great price