24 Volt 350 Watt MY1016Z3 Gear Reduction Electric Motor with 9 Tooth Sprocket for E Scooter

I know it says doesn’t fit on razor dirt quad but I had no problem putting it on mine. I had to angle grind down the original sprocket from the dirt quad since this sprocket was much smaller but you could just buy a new sprocket and skip that step. Besides that the motor ran in reverse so I just reversed the polarity by connecting red to black and black to red. But as far as no compatibility, it worked just fine so who knows what they mean. Motor runs smooth no issue

Perfect ! Just as advertisedI built deep bottom fishing right with penn 6/0 reel.

We use this motor on an automated bottle baler. The first one is still working after 4 years and we are building a second machine now.

Motor is good. Bracket arrived bent, but I was able to deal with it.

Bought this to build a DIY wood lathe. As I expected, due to it's intended application as a mini-bike motor, it it has plenty of torque at the sprocket. Not sure if it's mentioned, but there is a key-way on the shaft, if you needed to know. Best thing about this motor is that it is quiet, provided you bolt it to some kind of shock pad or torque absorbing elastomeric mount. Direct mounting will cause minor, but tolerable, vibrations in the frame, resulting in some additional noise. Nothing too serious. Again, great little motor. Plenty of power, quiet, and easily controlled with a standard PWM motor controller. NOTE: I highly recommend a PWM controller, as it is far more precise than current modulation and will give you more usable torque at low speeds.

Works perfectly. Just what I needed.

24v power supply and a controller. Now my sawmill pulls itself and I just sit back and watch.

Worked great for a month or two just to push my daughter on her tricycle but after about the fifth use it stopped working very disappointed cuz she loved it very powerful very well built but for that much money should of lasted longer wasn’t outside or beat on other then that great