Universal High Performance Vacuum Silicone Hose ID 1/8 inch 10FT Silicone Vacuum Tubing Hose with 6 clamps (Blue, 3mm 3 Meters)

good

Works as intended! 😂👍

I’m currently doing a Turbo build on a 306 Foxbody Mustang and needed this vacuum line for a lot of stuff on my turbo install.I got 3 10 ft length of different size vacuum hose in the kit I ordered. I’ve used 2 of them so far and ordered another kit so I can have extra.I checked the item over and it will stand up to the heat under the hood. Obviously I have the hose away from a heat source which is the normal thing to do with any hose.I was able to use this hose from my waste gate to the vacuum tree on the firewall of my foxbody and on the BOV.For the price you can’t beat what you get.

I needed a hose replacement for my back pack sprayer as the hose it came with failed and bursted. This was the best replacement for this application as it can support a much higher PSI than the stock hose and it was the right size. It feels very flexible and has the feel of silicone as you would expect. Bending it around is easy and when it is under pressure it does get stiff but still very flexible. Excellent hose for my application.

This silicone vacuum hose came rolled up in a plastic bag. I used this 6MM hose to replace some vacuum hoses that had gotten hard, brittle and cracked on my 97 4Runner. It worked just fine for that purpose. The hose isn't fiber reinforced and when trying to cut it, it tends to not cut straight. But it is very flexible and installs nicely, I didn't need to use any clamps and the lack of fiber reinforcing is perfectly fine for a vacuum hose. All in all, a fine product.

The quality of this tubing seems sufficient and the temperature rating of up to 374 degrees F is just what I needed for replacing vacuum lines under the hood. This kit comes with 6 tiny clamps which fit the tubing perfectly. The price seems a little high, but considering the temperature rating and the 6 clamps it is probably about right.

If you figure out the correct size the hose will slip onto your vacuum connections without needing hose clamps, but I appreciate getting six along with the 10’ of hose. This hose is heat resistant silicone and is also weather resistant. Although just installed, I expect this hose to have a long service life

Ordered Hose ID 1/8 inch 10FT Silicone Vacuum Tubing Hose with 6 clamps (Blue, 3mm 3 Meters) expecting the clamps to clamp to the 3mm diameter - the clamps are approximately 6mm minimum diameter and TOO large to adequately clamp the smaller diameter hose - VERY DISAPPOINTED that I wasted my time and money!!!