VIVO STAND-V002F Dual LED LCD Monitor Free-Standing Desk Stand for 2 Screens up to 27 Inch Heavy-Duty Fully Adjustable Arms with Max VESA 100x100mm

This has held two monitors for the past 4 years and is still in perfect condition. It’s exactly what I needed and still to this day couldn’t be more happy with it. It’s very sturdy, but if your monitors are positioned more forward, like anything that requires a bit of balance, it’ll become forward heavy and want to tilt over. So just make sure you position them properly. The quality is great in my opinion. It’s solid metal and hold my monitors very well. I’ve never had an issue with that. It’s a simple, black design that goes well with the rest of my set up so I really like that as well. You can also tilt your monitors to or away from you, adjust the height you want them (they’ll both be at the desired height), and it comes with cable clips so you can do some cable management.

Full disclosure: I ended up taking this back, but it was totally a case of "It's not you, it's me." This stand is FANTASTIC and you should totally buy it. The reason I got it originally was because I found a 32" smart TV locally that I couldn't pass up; at the time I had a 24" TV and a 20" monitor, so I decided to try doing the 32" TV as a regular TV with my 24" TV as a "monitor" for my computer. My vision isn't the greatest, so the 24" TV wasn't doing great for me as a monitor, and the 20" monitor I have (an older Acer) doesn't have a VESA mount. So it was either buy a different monitor, or get a different stand, and I opted to go back to my old setup for my monitor but buy a VIVO Single Monitor stand for my 32" TV. Back to this stand's information: They give you all the parts you need, and although there are several steps and different types of screws & wrenches involved, I was able to put things together without much trouble. My only complaint is that I wish they had arranged things in the bags better during packaging so I didn't have to figure out what size screws and Allen wrenches things went to. Other than that, once I figured out what size of things went to what, it was totally fine thanks to their instructions. I loved being able to adjust the tightness of the arms and tilt angles, etc with the Allen wrenches; very awesome, and I wish the VIVO single monitor stand was that way instead of using an actual wrench with a nut/bolt situation. Once I got the TVs situated the way I wanted to, everything was steady with no danger of tipping over. I would totally trust this for the setup I had again if I had the right monitor to match the VESA mount. All that to say, this is an awesome monitor stand, and you should totally get this if you're looking into a dual-monitor setup that meets the size & weight requirements for your monitors. Thanks for reading!

The VIVO STAND-V002F is a solid and reliable dual monitor stand. It was easy to assemble, and it holds both of my monitors securely without any wobble. The adjustable arms make it simple to get the perfect angle and height, which really helped improve my workspace and posture. Great build quality and totally worth the price!

Pros: Easy to assemble. Great range of motion. Cable management built-in to keep things neat in the back. Everything is metal, so very sturdy. With two monitors on a single stand, this frees up desk space underneath for other things. Cons: need tools in order to make adjustments. Fortunately, it comes with the necessary tools. Wish it had notches in some of the adjustments like height and tilt. For example, the height adjustment depends on friction to maintain its position. Have to tighten the bolt really tight so the monitors don't slide down. Same with tilt. Have to make it really tight so the monitors don't tilt down. Problem is, not sure how tight it the right amount of tight. If you over-tighten the bolt, that makes it harder to loosen in the future if you need to re-adjust it. I attached two 24" monitors and with the monitors side-by-side, the arms stick out around 7-8 inches behind. Since my desk is up against a wall, this prevents me from pushing the monitors against the wall. Since my desk isn't that deep to begin with, the monitors are closer to my face than I would prefer. Two 27" monitors would probably be a better choice so the arms are spread out wider. Suggestion for buyers: assemble the whole thing, including the monitors, flat on the floor. This way, the arms will be balanced when placed upright. Despite negatives, the stand works for me and I would buy it again. I would probably pair it with a couple of 27" monitors instead.

Im one to never review things unless they are extremely good or extremely bad. I am pleased to say in this case that it is because it is extremely good! The stand is extremely sturdy without mounting it and using it with just the weighted base. It was really easy to put together, only had to put in 3 screws for the base and 4 screws each for the monitor mounts (i actually used the ones provided with my monitor instead of the ones they sent, but the ones they send looked nice enough.) The monitors slid into place easily and there is one nut to secure it on the stand so you dont unhook it when you adjust it. Once you make your adjustments you can tighten the bolts with the included allen wrenches to lock the stand in place. You can then even store the allen wrenches in the included wire clips for future use! I am also just amazed at how much space it freed up on my desk. The ONE WORD OF CAUTION i have is that when attaching the monitors, after putting the first one on it tends to tip over. So between putting the first and second monitors on, either have a buddy hold it steady, or in my case, help weigh the base down more with a ream of paper or a heavy book. Once the second monitor is on, the stand is way more steady then i would imagine. Overall this is a really good stand for the money and i would recommend it to anybody who needs one!

This was the least expensive & "sponsored" item. So I thought it would be kind of bad,cheap or a flat-out POS. It turns out it works really good and above all else is very stable.

Received this 3 days back and set this up immediately. No issue with the product in terms of assembly, linkages, adjustment, stability. There is a minor scratch on the base though which is not a big issue to me. I assemble this and set this to roughly the height and position i want by measurement before putting the monitor on. After the monitor is put on, minor adjustment to get them to exactly where i wanted. No issue in the process. In terms of stability, i set this up to a W configuration with the 2 monitors as close to the vertical shaft as possible. This has an advantage of saving desk space too with the monitor all the way back. With this, the stand is very stable. All in all, very happy with the purchase.

خيار رائع جدا للشاشات ركبت عليه شاشة ٢١ انش و٢٤ انش وجدا مناسب وعملي ومفيد عيبه لازم توازنه وتركيبه ياخذ وقت اخذ مني ساعتين تقريبا

Helped me clean a lot of clutter lying around on my desk which was too small for placing two monitors in addition to the usual accessories. No complains!

El primer producto de la marca que compré y desde entonces he comprado otros dos o tres todos necesarios y todos de excelente calidad

works perfect if you have the monitors flat it stable but if you angle the monitors the stands fall down. its basic physics. the stand is perfect when you add weight to it to ensure it doesnt fall when you angle toe monitors to far forward.