RACGTING Hotas Mount for Logitech X56,X52,X52 Pro, Throttle and Hotas Systems for Thrustmaster T Flight HOTAS,Thrustmaster T.16000M, Thrustmaster TCA,Hotas Desk Mount for The Flight Sim Game Joystick

Great product. Medium assembly required but super solid platform for controllers

A little fiddly to set up and adjust but solid and effective.

These mounts were as advertised and expected. Good aluminum material. Easy to assemble and adjust. Great versatility. I did make some desktop spacers to raise mounts high enough to clear chair arm rails.

Product was as advertised. Works great

I bought these mounts after researching a lot of other similar. I’ve had others in the past, but they were often wobbly and flimsy. Not so here. These mounts are very sturdy, easy to set up, and fit everything I can think. I had the Logitech X-56 on there for a while, and now the Turtle Beach Flight Deck HOTAS… no problems with the setup for either. Once tightened up, they hold the devices very steady and do not budge a bit. Well worth the price!

My review applies for Dual VKB Gladiator NXT. If you have something else not sure.So I have A VKB Gladiator NXT and VKB Gladiator NXT Omni Throttle (both have same base).First off the issues.These are kind of jack of all trade .. will work for all but best at nothing.It will take some time to setup (make sure you get all the parts squared UP)Their is no way to gauge if one rail or screw is same distance as another so have a tape measureWhy are their 2 sizes of hex nutsthe fold away storage is 100% useless (once you mount your joysticks .. it cant fold inless you remove joystick ... you will NEVER do this)For the Galdiator .. after install their is about 1 1/2 inches of brace / mount plates that sick out... they can stab you. (I puts some picks up of the these) (I removed them with A Dremel )The good...They workThey CheapFor the price .. i give them a 4/5 ... how erver if you can afford higher end ... I would. I do plan on replacing these in the long runPic 1 shows the extra tab that are in the way ..pic 2 shows how much extra it ispic 3 shows how much space i have between my chair and the mounts (= on both sides) .. 3x fingers from joystick to chair ... before i could not get the sticks this close.

Solid construction. All metal. Easy assembly!

I'm using this to mount a Turtle Beach Velocity One Flight Stick. Had to rearrange for my deskNOTE: There's a lot of extra material on this setup. THE GOOD: You can rearrange/rebuild the mount somewhat - not ideal. I've had to do exactly this, because there's a beam that braces my desk underneath. THE BAD: The red lever you use to lock the device in place is long (longer than it needs to be) and hits that beam/brace which keeps me from locking it into place. I had to essentially rebuild the mount and invert the locking mechanism making it so I can't use the mount's grip - switched a lot of things around to come up with a configuration that works. If you have a desk edge that has plenty or clearance underneath - about 4" from anything that the red lever may hit on, then this will work. However, I think there are better solutions out there with less excess material. They should have made the lever lock to the side with the option for either side instead of directly under the desk. Even with the mount used as intended there's a lot of material overhang etc. - This allows you to position the joystick up and down to a height you prefer but you'll be hitting your chair or knee on the extra that hangs down. You'll also need to consider the width of the Joystick mounting rails - they are much wider than the joystick even though the joystick I'm using has a very wide base.