Orion Motor Tech Oil Extractor Pump and Dispenser Tool Kit, 6L Pneumatic Transmission Fluid Bleeder Set, 1.6 gal 2 Way Vacuum Fluid Evacuator and Filler Oil Change Kit 15 ATF Refill Adapters 3 Hoses

This product made changing trans fluid so much faster, It works amazing!Two issues to note however, the dispense/extract symbols are backwards so blowing a bunch of air in the trans case while thinking I was in extraction mode made a huge mess. Double check that before doing what I did. Also, the lid is on incredibily tight, to the point it'll make you think it's not supposed to come off. I turned it over so the handle was in a vice (using a towel for cushion) and used a long wrench in the bottle/container handle to unscrew it. It will unscrew with enough leverage.

Works as it should. Just as good as the $500 name brands to get the job done filling transmissions with fluid

Used this to drain and fill the transmission fluid in my Toyota Tundra. Sealed transmission, and the fill plug is wonderfully placed on top right behind the front driveshaft. Trying to use a hand pump or squeeze bags into there would be a nightmare. This kit's adapter screwed right into the fill port and it dispensed 4 quarts in about 30 sec at 50 psi. No fuss, no mess. The extraction part works well (I pulled a quart of new fluid out of the bottle just to try it) but faster to unscrew the lid and just pour in the new fluid. Very difficult to get off the first time. All in all, this works extremely well. I like the full range of adapters to use on basically any brand of car. I recommend this for the DIY mechanic who wants to be a little faster and less messy with these kinds of jobs.

First off, the lid does remove. I nearly shipped it back as I could not get it to budge, but another user made this suggestion and it worked. Put a long extension or cheater bar through the container handle, hold the container between your knees with the bar locked under a knee, and leverage the top off. It DOES come off.There are no instructions other than what is on Amazon. The flow control (extract/dispense) label is backward but on the know the label is correct. In the end, you will figure it out pretty simply.Highly suggest a regulator on your air line set at 45psi.All of those nice connectors will likely not fit into the spaces you have for filling. It was either the adapter for the small plastic tube or the "L" fill adapter. Pumped 4 liters in under a minute and very easy to control. Would have taken 30 minutes to fill with a hand pump. Some transmissions have to be running to top off and within a specific temperature range. This pump worked wonderfully.

"where has this been all my life.", my husband. He is a mechanic and he will never go without one ever again.Loves it, perfect purchase for a mechanic if they do any kind of fluid sucking.

First, one of the quick adapters failed, making the transmission adapter kit totally useless.Second, the quick adapter on the unit failed. I was able to replace this at my local hardware store.Third, the lit blew off at 40 PSI (not 40 BAR) covering me in transmission fluid and leaving a bruise on my chin.I'll be returning and asking for a refund.

The instructions are not valid. The device will either suck or dispense but not the way the instructions are described. I find that the "suck" feature is not really useful, and that for the dispense feature, I much rather have one with a hand pump that does not need the long cord from an air compressor. Borderline on useful or easy to use.

I have used this a few times already and it is a great product. I like all the attachments for dispensing and used it on my Lexus GX to fill the tranaxle. The extraction feature is nice for removing liquids. I used it to empty the power steering reserior and brake fluid reservoir. The only problem I had was the labeling for the extraction and fill knob did not match the label on handle.