Visbella V363 Silicone Oven Glass Door Gasket Seal High Temperature Heat Resistant from -80ºF to 600ºF (Black)

This is a great heat resistant sealant. The cap enabled me to easily pierce the tube, the supplied nozzle is easily cut to size with a Stanley knife, possibly a strong sharp kitchen knife on a chopping board. I applied a line of sealant waited the prescribed time and joined my components.I was repairing a broken switch plate on a slow cooker, so this needed to secure plastic to stainless steel, and be able to cope with the high temperatures produced by our slow cooker.The result was great, good, clean, strong bond that once again allowed us to set the dial to on, off, medium etc without the switch backing plate moving.Good results at a great price, would recommend this product for people needing a sealant that operates in high temperatures, with no smells etc.

work very well

I bought the Visbella V363 silicone gasket seal to replace the worn-out seal on my oven door, and it’s performed really well so far. It’s heat-resistant, flexible, and seals tightly, helping to restore heat efficiency and reduce energy loss.🔥✅ Pros:Excellent Heat Resistance: Handles temps up to 600ºF with no issues. I’ve used it for several weeks at high heat, and there’s no warping, melting, or smell.Flexible & Easy to Trim: The silicone is soft but sturdy. It’s easy to cut to the size you need, and it contours nicely around corners and curves.Great Adhesion (if surface is prepped): I cleaned the door surface thoroughly before applying, and the seal has stuck well so far. Definitely prep the area for best results.Improved Oven Performance: After installing, my oven holds heat much better, and preheating time seems a little quicker. Definitely feels like it's working more efficiently now.⚠️ Things to Know:No Adhesive Included: This is just the gasket/seal—you’ll need to use a high-temperature silicone adhesive or sealant (sold separately) to install it properly.Not Pre-Shaped: It’s a universal cut-to-fit style, so you’ll need to measure and shape it yourself—might require a bit of patience depending on your oven model.💬 Final Verdict:The Visbella V363 is a great, cost-effective solution if your oven door seal is cracked, brittle, or falling apart. Just be sure to get the right adhesive and take your time with the installation. Once it’s in place, it really makes a difference.Highly recommended for DIYers or anyone looking to give their oven a second life without spending on repairs. 🛠️🔥

Purchased this to help seal my internal oven glass in place after the catches for it broke off.Easy to apply, reasonably priced, and held in place really well. Highly recommend.

The rubber seal on my oven door was still attached at all four corners but floppy along the straight bits. The seal is in good condition and has not perished, it had just come unstuck. Looked at oven door seals and it looked like a lot of faff. So I ordered this glue rather than pay £100 for an oven chap to come out and sort it for me. I left all four corners clipped in and squeezed this under the rubber straights. It is messy like others have said, but it’s not horrendous, I did use my fingers to squidge it where I needed it and like silicone around a bath tub, I used my finger to tidy it up. Just used my oven and there isn’t any heat leaking out the sides, meal cooked normally, job done!Will say though, you have to squeeze the tube quite hard, if you want to use it again you have to cut more off of the nozzle, I also checked an hour after I applied the glue to see if I had missed any bits (it goes semi cured) and touched it up, I left my oven door a jar for a few hours whilst it set and then didn’t use the oven for 48 hours to be on the safe side.Save yourself money and get this instead of a new oven!

Works as a shade

Perfect for affixing oven glass doors back to their frame. As it can withstand very high temperatures it's great for this job. I used a fraction of the tube reaffixing the glass on ny rangemaster. It cures fairly quickly, follow instructions and a suction cup helps to pull the glass towards the frame until it sets. Easy to clear off excess. Now I'm waiting for a gasket to fail on my car engine so I can give it a try. Great value product.

Didn't use this for my oven but looked at the specs and was an ideal choice for sealing a new extraction fan in my Combi boiler to the metal casing (no gasket) just made a neat ring of the silicone and tightened up the mounting screwsleft it overnight to cure as suggested and tested for leaks the next day, no issues so great for what i wanted