🔄 Refresh Your iPhone, Elevate Your Style!
This OEM Rear Cover Back Glass Replacement for iPhone 13 Pro Max (6.7 inches) in Graphite is designed for all carriers. It features pre-installed adhesive for easy installation, a larger camera hole for convenience, and comes with a full professional toolkit. Each unit is tested for quality assurance, and a one-year warranty ensures customer satisfaction.
L**D
Great product but super hard to do
There’s nothing wrong with the product it worked great, but let me tell you I don’t advise tackling this job unless you’re very patient and well prepared. The glass is really thick around the camera lens and super hard to get off. I finally did but I ended up damaging the front screen And killed some pixels so I had to end up replacing the front screen on a iPhone 13 pro max. The worst part about the whole thing is that screen cost me 450 bucks and I was so frustrated. I just brought it in and had somebody do it so the total cost me 550 for some reason the iPhone 13 promax the parts are more expensive than other phones , it’s probably the same way with the 14 promax when I brought it to the shop the guy had a special laser that he ran over the phone which loosened all of the Apoxsee glue and it came right off. He did the repair in about 20 minutes it really matters to have the right tools , the right desk top setting this is truly something to consider before you try to repair it for yourself
N**O
OMG
The replacement is plastic NOT glass. The tools are worthless. You will spend 4-6 hours on this. My first one and without any incidents. I used the flat pry bar until my fingers bled. Get some quality tools that you can keep when you buy this. It’s not a bad kit it’s just intense. Around the lenses is super complicated and need to have some wits about you. Must buy and center punch to get the glass out of the lens area. Stop frequently and clean the area. Get some glue to seal everything before sticking this on. The adhesive does nothing except hold it in place, very open. Not even water resistant using the adhesive alone. I used clear JB Weld Resin. Biggest relief was using tape to cover everything that you’re not working on so you don’t get bloody hands like I did. The glass thickness around lenses is double thickness. Understand what is behind the glass before digging, there is loose magnets that come out, there is delicate copper coils, the antennas, flash, sensors. All of this is sandwiched between the phone and glass, you dig in without knowing…you lose, 100% guarantee-kit-quality tools to pry and several Exacto blades-small heat gun-center punch-time-don’t drink liquor, won’t go well
K**B
Awful.
Awful product. It looks great in the packaging, but the pre-installed adhesive is useless and the glass is extremely fragile. It cracked within days of install with absolutely no drops/impacts/etc.It also wouldn't fit my case since the phone cutout on the replacement camera bump area was blocking it.
R**E
Save NOW!!
Please please BUY THIS! SAVE YOU'RE MONEY!Once I got this in the mail. It was wrapped very well. Once I got it out of the box, everything was included. The instruction says it will take about an hour or several hours. This only took me about a half an hour to an hour to fix. I couldn’t believe how easy it was. I could’ve done it all myself.What do you mean save your money. For example: I went to get my phone professionally fixed, after I got it fixed from professionals, I asked how much was it. it was $200 for the backing to be fixed. Please please buy this, this will save you so much money. I highly highly recommend it. It’s very very high-quality backing and it’s very good to with the Apple logo. So save now and thank you later.
J**N
Perzework Back Glass: A DIY Adventure (With Itchy Consequences)
Okay, so, I'm no phone surgeon, but I decided to give this replacement glass a shot. Figured, how hard could it be, right? Wrong. This was like trying to perform open-heart surgery on a flea while wearing oven mitts.The glass itself? Fits like a glove. Color match is spot on. So far, so good. But the installation? Let's just say it's a test of patience and dexterity. I’m pretty sure I aged five years in the process.Now, here's the kicker: do not touch the broken glass. I repeat, do not touch the broken glass. It's like your skin is having a tiny, itchy war with microscopic aliens. I'm still scratching a week later.So, if you're handy, patient, and enjoy a good scratch, this might be for you. For the rest of us, maybe a professional is the way to go. But hey, at least my phone looks new!
C**R
perfect
perfect
Y**A
Quality
The product is good quality and shipping on time. Thank you.
M**I
Gaps arround the camera lenses.
Cons: I can see visiable gaps arround the Camera lenses. Not very confident that it will provide any IP rating anymore.Pro: Cheap and easy replacement.Suggestions: keep your device away from water. It can easily harm the device.
Trustpilot
1 month ago
1 day ago